http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Comparing Waste Gypsum with CaCO₃ as Filler Towards Developing Low-cost PBAT C omposites
Tae Woong Kong(공태웅),In Tae Kim(김인태),Junho Moon(문준호),Tridib Kumar Sinha,Dong Ho Kim(김동호),Inseon Kim(김인선),Kwangyong Na(나광용),Kyum Woo Choi(최겸우),Jeong Seok Oh(오정석) 한국고분자학회 2021 폴리머 Vol.45 No.1
폐석고(CaSO₄) 및 탄산칼슘(CaCO₃)을 이용하여 poly(butylene adipate-co-terephthalate)(PBAT) 복합체를 용융혼합으로 제조한 뒤 비교하였다. 석고와 탄산칼슘은 Ca<SUP>2+</SUP> 양이온을 동일하게 포함하지만 다른 크기의 음이온 즉, 각각 SO₄<SUP>2-</SUP>, CO₃<SUP>2-</SUP>을 함유하고 있다. Fajans’ rule에 따르면 CaCO₃는 이온성이 더 큰 반면, CaSO₄는 편극성이 더 크다. 석고는 탄산칼슘에 비해 편극성이 크기 때문에 filler-matrix간 정전기적 상호작용에 의해 PBAT 내에 분산이 더 잘 되었다. 석고/PBAT 복합체는 충전제-고분자 함량 20:80의 비율에서 탄산칼슘/PBAT 복합체 대비 낮은 인장강도와 높은 연신율 값을 나타냈다. Polylactic acid(PLA)를 첨가함에 따라 석고/PLA/PBAT 복합체는 인장강도와 연신율이 향상했지만 탄산칼슘/PLA/PBAT 복합체의 경우에는 PLA의 첨가에 따른 효과가 관찰되지 않았다. 이는 탄산칼슘에 의한 PLA의 depolymerization에 기인하는 것으로 사료된다. 이러한 복합체의 기계적 거동은 열적, 형태학적, 결정학적 분석을 통해 잘 설명되었다. Melt-mixed composites of poly(butylene adipate-co-terephthalate) (PBAT) with the waste gypsum and calcium carbonate were prepared and their properties were compared. Calcium carbonate and gypsum contain the same cation (Ca<SUP>2+</SUP>) but different anions i.e., smaller CO₃<SUP>2-</SUP> and larger SO₄<SUP>2-</SUP> respectively. According to the Fajans’ rule, CaCO₃ is more ionic whereas gypsum is more polarizable. Because of the abundant polarizability, gypsum was well dispersed in the PBAT matrix through the filler-matrix electrostatic interaction. The gypsum/PBAT showed lower tensile strength but higher elongation at break at a filler to matrix ratio of 20: 80 than those of CaCO₃/PBAT. Further, the addition of polylactic acid (PLA) enhanced both the tensile strength and elongation at break of the gypsum/PLA/PBAT while no such effective changes were observed for CaCO₃/PLA/PBAT maybe due to the possibility of depolymerization of polymers in the presence CaCO₃. Thermal, morphological, and crystallography studies well corroborate with the mechanical behavior of the composites.
( Tae Woong Kong ),( In Tae Kim ),( Tridib Kumar Sinha ),( Junho Moon ),( Dong Ho Kim ),( Inseon Kim ),( Kwangyong Na ),( Min-woo Kim ),( Hye-lin Kim ),( Taegyeong Hyeong ),( Jeong Seok Oh ) 한국고무학회 2020 엘라스토머 및 콤포지트 Vol.55 No.4
Stearic acid (SA), polyethylene glycol (PEG), and malic acid (MA) have been used to modify the surface of waste gypsum to develop corresponding poly (butylene adipate-co-terephthalate) (PBAT) composites. According to the mechanical properties, MA-treated gypsum (MA-gypsum) showed the best performance, whereas SA-gypsum showed the worst performance. In contrast to SA and PEG (having -COOH and -OH as polar functional groups, respectively), the presence of both -OH and -COOH in MA is responsible for the superior surface treatment of gypsum and its better dispersion in the polymer matrix (as revealed by FE-SEM analyses). The presence of long aliphatic chain in SA is supposed to inhibit the dispersion of SA-gypsum. Further, the performance of MA-gypsum/PBAT was enhanced by adding polylactic acid (PLA). The maximum optimized contents of MA-gypsum and PLA are 20 and 7.5 wt% for developing a high-performance PBAT composite.
구형파 2-Hall Sensor를 이용한 영구자석형 동기전동기 벡터 제어의 정역회전을 위한 회전자 위치 추정 알고리즘
공태웅(Tae-Woong Kong),이정효(Jung-Hyo Lee),유재성(Jae-Sung Yu),이원철(Won-Chul Lee),원충연(Chung-Yuen Won) 전력전자학회 2007 전력전자학술대회 논문집 Vol.- No.-
This paper proposes new vector control method that using two rectangular hall sensors instead of using the expensive encoder and resolver. The proposed method is similar to T-method. But the proposed method measures the speed using two hall sensors signals instead of encoder signal. The proposed new speed estimation method is stable under the rated speed range. This algorithm will be able to moderate prices of the whole system and apply for the unfit place for use encoder and resolver.
구형파 2-Hall Sensor를 이용한 영구자석형 동기전동기의 벡터 제어
공태웅(Tae-Woong Kong),이정효(Jung-Hyo Lee),유재성(Jae-Sung Yu),이원철(Won-Cheol Lee),김재형(Jae-Hyung Kim),원충연(Chung-Yuen Won) 한국조명·전기설비학회 2008 조명·전기설비학회논문지 Vol.22 No.2
본 논문은 고가의 위치 측정 센서인 엔코더나 레졸버를 사용하지 않고 구형파를 발생시키는 2개의 홀센서를 사용하는 벡터 제어방식을 제안하였다. 이 방식은 엔코더 출력 펄스 신호 대신에 2개의 홀센서에서 발생되는 구형파 신호를 4체배한 신호를 이용하여 속도와 위치를 추정한다. 구형파를 발생시키는 2개의 홀센서로서 영구자석형 동기전동기의 벡터 제어를 구현하였을 때 정격속도 범위 내에서 안정적으로 제어되는 것을 실험과 시뮬레이션을 통하여 확인하였다. 2개의 홀센서를 이용한 벡터 제어는 전체 시스템의 비용을 절감시킬 뿐 아니라, 협소한 공간에도 취부 할 수 있으므로 엔코더나 레졸버의 장착이 어려운 곳에 적용될 수 있다. This paper proposes a new vector control method using two rectangular hall sensors instead of using the expensive encoder and resolver. The proposed method estimates the speed and rotor position by using the quadruple of two hall sensors signals instead of encoder signal, The proposed new speed estimation method is stable under the rated speed range. This algorithm will be able to moderate prices of the whole system and apply to the condition unfitted with encoder and resolver.