RISS 학술연구정보서비스

검색

인기 검색어

    다국어 입력

    http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

    변환된 중국어를 복사하여 사용하시면 됩니다.

    예시)
    • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
    • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
    닫기

    체표전개도에 의한 패턴구조에 관한 연구 = A Study on the Pattern Structure through a Development Figure of Body Surface

    한글로보기

    https://www.riss.kr/link?id=T8941626

    • 0

      상세조회
    • 0

      다운로드
    서지정보 열기
    • 내보내기
    • 내책장담기
    • 공유하기
    • 오류접수

    부가정보

    국문 초록 (Abstract) kakao i 다국어 번역

    본 논문은 몸에 꼭 맞는 토루소 원형 패턴 설계시 우선적으로 파악되어야 하는 패턴 구조에 대하여 연구 보고함으로써 인체의 특성과 패턴과의 관계를 보다 밀착시켜서 살펴보고자 한다.
    입체인 체형의 평면화에 의하여 나타나는 체표전개도상의 형태적 특징은 의복설계를 위한 패턴구조와 직결되므로 본 연구의 결과는 타이트 피트한 의복의 제작시 기초자료로 그 효용성이 있으리라 여겨진다.
    토루소 원형 설정부위를 기준으로 한 인체부위별 특징에 따른 패턴구조를 파악하고자 석고체에 의하여 인체를 재현하여 체표 셀을 전개하여 연구한 결과 다음과 같은 결론을 얻었다.
    1. 마틴 계측에 의한 16항목의 신체 계측지는 96년 국민표준체위에 비하여 다소 우수하였다. 각 항목별 상관분석 결과 유폭, 진동깊이, 어깨각도는 가슴둘레와의 상관성이 낮게 나타냈으므로 독립항목에 해당하였다.
    2. 사진촬영에 의하여 정면과 측면에서의 부위별 볼륨과 공간량을 파악하였다.
    3. 패턴 구조를 파악하기 위하여 체표전개도값과 신체계측지를 비교한 결과 등길이와 어깨각도를 제외한 모든 항목에서 차이가 나타났다. 체표 전개도값이 신체 계측치보다 더 크게 나타났다.
    4. 체표전개도에서 벌어짐 량에 의한 각 부위별 패턴구조의 특징은 앞·옆·뒤면의 3부위에서 나타났다.
    1) 앞면은 가슴볼륨과 형태 및 가슴의 경사도와의 관계와 엉덩이의 구조면에서 4유형 즉, 가슴다트량, 윗가슴다트량, 가슴밑 제1, 2다트량, 복부에서 엉덩이의 변화를 살펴볼 수 있었다.
    2)옆면에서의 패턴구조는 3유형으로 나타났다. 옆선이 겹쳐지는 유형, 벌어지는 유형, 모아지는 유형으로 분류하였는데 벌어지는 유형은 엉덩이가 큰 체형이고, 겹쳐지는 유형은 엉덩이가 작은 체형, 모아지는유형은 허리와 엉덩이의 차가 거의 없는 체형이다.
    3)뒤면에서의 패턴 구조는 2가지 유형으로 나타났다.
    어깨다트 량을 대·중·소로 구분하였고 이 량은 등의 굽은 정도에 따른 형태적 특징으로 나타났다. 엉덩이에서 겹쳐진 량, 벌어지는 량, 모아지는 량을 보았다. 허리가 들어간 정도와 엉덩이의 돌출 정도에서 형태적 특징으로 볼 수 있는 부분이다.
    5. 체표전개도에 의하여 설계 제작된 실험복은 착의 결과 외관적으로 타이트 피트성이 우수한 것으로 관능검사결과 모든 항목에서 높은 값이 나타났다.
    번역하기

    본 논문은 몸에 꼭 맞는 토루소 원형 패턴 설계시 우선적으로 파악되어야 하는 패턴 구조에 대하여 연구 보고함으로써 인체의 특성과 패턴과의 관계를 보다 밀착시켜서 살펴보고자 한다. ...

    본 논문은 몸에 꼭 맞는 토루소 원형 패턴 설계시 우선적으로 파악되어야 하는 패턴 구조에 대하여 연구 보고함으로써 인체의 특성과 패턴과의 관계를 보다 밀착시켜서 살펴보고자 한다.
    입체인 체형의 평면화에 의하여 나타나는 체표전개도상의 형태적 특징은 의복설계를 위한 패턴구조와 직결되므로 본 연구의 결과는 타이트 피트한 의복의 제작시 기초자료로 그 효용성이 있으리라 여겨진다.
    토루소 원형 설정부위를 기준으로 한 인체부위별 특징에 따른 패턴구조를 파악하고자 석고체에 의하여 인체를 재현하여 체표 셀을 전개하여 연구한 결과 다음과 같은 결론을 얻었다.
    1. 마틴 계측에 의한 16항목의 신체 계측지는 96년 국민표준체위에 비하여 다소 우수하였다. 각 항목별 상관분석 결과 유폭, 진동깊이, 어깨각도는 가슴둘레와의 상관성이 낮게 나타냈으므로 독립항목에 해당하였다.
    2. 사진촬영에 의하여 정면과 측면에서의 부위별 볼륨과 공간량을 파악하였다.
    3. 패턴 구조를 파악하기 위하여 체표전개도값과 신체계측지를 비교한 결과 등길이와 어깨각도를 제외한 모든 항목에서 차이가 나타났다. 체표 전개도값이 신체 계측치보다 더 크게 나타났다.
    4. 체표전개도에서 벌어짐 량에 의한 각 부위별 패턴구조의 특징은 앞·옆·뒤면의 3부위에서 나타났다.
    1) 앞면은 가슴볼륨과 형태 및 가슴의 경사도와의 관계와 엉덩이의 구조면에서 4유형 즉, 가슴다트량, 윗가슴다트량, 가슴밑 제1, 2다트량, 복부에서 엉덩이의 변화를 살펴볼 수 있었다.
    2)옆면에서의 패턴구조는 3유형으로 나타났다. 옆선이 겹쳐지는 유형, 벌어지는 유형, 모아지는 유형으로 분류하였는데 벌어지는 유형은 엉덩이가 큰 체형이고, 겹쳐지는 유형은 엉덩이가 작은 체형, 모아지는유형은 허리와 엉덩이의 차가 거의 없는 체형이다.
    3)뒤면에서의 패턴 구조는 2가지 유형으로 나타났다.
    어깨다트 량을 대·중·소로 구분하였고 이 량은 등의 굽은 정도에 따른 형태적 특징으로 나타났다. 엉덩이에서 겹쳐진 량, 벌어지는 량, 모아지는 량을 보았다. 허리가 들어간 정도와 엉덩이의 돌출 정도에서 형태적 특징으로 볼 수 있는 부분이다.
    5. 체표전개도에 의하여 설계 제작된 실험복은 착의 결과 외관적으로 타이트 피트성이 우수한 것으로 관능검사결과 모든 항목에서 높은 값이 나타났다.

    더보기

    다국어 초록 (Multilingual Abstract) kakao i 다국어 번역

    The purpose of this study is to investigate and find out the relation between human body features and pattern by researching and reporting the patterns structure that should be deemed prior to anything at the time of design of fitting original pattern of Trousseaus.
    The features in pattern in the body table diagram according to ground plan of cubic body type are closely related to structure in pattern for design of costumes, hence the results of this study were proved to be useful for make-up of costumes of high fashion as basic materials.
    The followings are results from research and analysis of body cell by coming the human body into realization for the purpose of identifying structure in pattern according to features of human body based upon original part of Trousseaus.
    1. The physical measurement value from 16 items according to Martin Measurement Methodology came out standing compared with the national average physical standard in 1997. As a result of analysis of co-relation per each item, width of hips, depth of armpits, and shoulder angle were proved to be less co-related to girth as independent item.
    2. The volume and space per body in light of front and side with a photo-shot were identified.
    3. To identify pattern structure, a development figure of body surface and physical measurement diagram were compared and revealed to differentiate from each other except for shoulder angle and back-length. The development figure of body surface showed a most significant difference in measurement.
    4. The features of each structure in pattern according to rounding-up volume of a development figure of body surface was shown in front·side·rear part.
    1) At front, there were four types according to volume and type, declination of breast and structure of hips, that is, breast dart volume, upper breast dart volume, bottom of breast #1, #2 dart volume, and change of dips in belly.
    2) At side, there were three types of structures in pattern. They are an folded type, widening type, and rounding-up type; the volume of widening is identical to bigger hips, folded type to smaller hips, and rounding-up type belongs in the same size.
    3) At rear, there were two types of patterns in structure. At first, It's classified dart volume of rear-shoulder into Large·Medium·Small with it displaying unique feature depending upon the pattern of bending. Second, I have investigated volume of folding, rounding-up, and widening of hips. I have found features in pattern in the degree of protrusion and concave part of hips.
    5. The test uniform manufactured and designed according to a development figure of body surface was proved to have a higher score in organic function test as well as tight fitting.
    번역하기

    The purpose of this study is to investigate and find out the relation between human body features and pattern by researching and reporting the patterns structure that should be deemed prior to anything at the time of design of fitting original pattern...

    The purpose of this study is to investigate and find out the relation between human body features and pattern by researching and reporting the patterns structure that should be deemed prior to anything at the time of design of fitting original pattern of Trousseaus.
    The features in pattern in the body table diagram according to ground plan of cubic body type are closely related to structure in pattern for design of costumes, hence the results of this study were proved to be useful for make-up of costumes of high fashion as basic materials.
    The followings are results from research and analysis of body cell by coming the human body into realization for the purpose of identifying structure in pattern according to features of human body based upon original part of Trousseaus.
    1. The physical measurement value from 16 items according to Martin Measurement Methodology came out standing compared with the national average physical standard in 1997. As a result of analysis of co-relation per each item, width of hips, depth of armpits, and shoulder angle were proved to be less co-related to girth as independent item.
    2. The volume and space per body in light of front and side with a photo-shot were identified.
    3. To identify pattern structure, a development figure of body surface and physical measurement diagram were compared and revealed to differentiate from each other except for shoulder angle and back-length. The development figure of body surface showed a most significant difference in measurement.
    4. The features of each structure in pattern according to rounding-up volume of a development figure of body surface was shown in front·side·rear part.
    1) At front, there were four types according to volume and type, declination of breast and structure of hips, that is, breast dart volume, upper breast dart volume, bottom of breast #1, #2 dart volume, and change of dips in belly.
    2) At side, there were three types of structures in pattern. They are an folded type, widening type, and rounding-up type; the volume of widening is identical to bigger hips, folded type to smaller hips, and rounding-up type belongs in the same size.
    3) At rear, there were two types of patterns in structure. At first, It's classified dart volume of rear-shoulder into Large·Medium·Small with it displaying unique feature depending upon the pattern of bending. Second, I have investigated volume of folding, rounding-up, and widening of hips. I have found features in pattern in the degree of protrusion and concave part of hips.
    5. The test uniform manufactured and designed according to a development figure of body surface was proved to have a higher score in organic function test as well as tight fitting.

    더보기

    목차 (Table of Contents)

    • 목차
    • I. 서론 = 1
    • II. 이론적 배경 = 3
    • 1. 체형에 관한 연구 = 3
    • 2. 패턴에 관한 연구 = 4
    • 목차
    • I. 서론 = 1
    • II. 이론적 배경 = 3
    • 1. 체형에 관한 연구 = 3
    • 2. 패턴에 관한 연구 = 4
    • III. 연구방법 = 8
    • 1. 신체계측 = 9
    • 2. 사진촬영 = 14
    • 3. 석고제작 = 17
    • 4. 체표 셀 제작 및 전개 = 18
    • 5. 착의실험 및 관능검사 = 22
    • IV. 연구결과 및 고찰 = 24
    • 1. 신체계측 = 24
    • 2. 사진촬영 = 27
    • 3. 체표 셀 전개도 = 31
    • 4. 착의실험 및 관능검사 = 47
    • V. 결론 = 50
    • ※ 참고문헌 = 52
    • ※ Abstract = 56
    더보기

    분석정보

    View

    상세정보조회

    0

    Usage

    원문다운로드

    0

    대출신청

    0

    복사신청

    0

    EDDS신청

    0

    동일 주제 내 활용도 TOP

    더보기

    주제

    연도별 연구동향

    연도별 활용동향

    연관논문

    연구자 네트워크맵

    공동연구자 (7)

    유사연구자 (20) 활용도상위20명

    이 자료와 함께 이용한 RISS 자료

    나만을 위한 추천자료

    해외이동버튼