RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      統一新羅 臺附盌의 型式分類와 變遷 : 서울·京畿地域을 中心으로

      한글로보기

      https://www.riss.kr/link?id=T11592007

      • 저자
      • 발행사항

        오산 : 한신대학교, 2009

      • 학위논문사항

        학위논문(석사) -- 한신대학교 대학원 , 국사학과 고고학전공 , 2009

      • 발행연도

        2009

      • 작성언어

        한국어

      • KDC

        911.5 판사항(4)

      • DDC

        951.9 판사항(21)

      • 발행국(도시)

        경기도

      • 형태사항

        80장 : 삽화, 도표 ; 30 cm

      • 일반주기명

        참고문헌: 장 74-80

      • 소장기관
        • 국립중앙도서관 국립중앙도서관 우편복사 서비스
        • 한신대학교 장공도서관 소장기관정보
        • 한신대학교 중앙도서관 소장기관정보
      • 0

        상세조회
      • 0

        다운로드
      서지정보 열기
      • 내보내기
      • 내책장담기
      • 공유하기
      • 오류접수

      부가정보

      국문 초록 (Abstract) kakao i 다국어 번역

      서울·경기지역에서 통일신라 유적이 발견되는 사례가 증가하면서 고분과 토기에 관한 관심은 더욱 높아졌으며, 그 결과 이 지역을 중심으로 신라의 영역화 과정이나, 유물의 전체적인 편년연구가 진행되고 있다. 그러나 개별유물에 대한 집중적인 분석은 아직까지 축적된 연구가 미비한 실정이다.
      이러한 문제점을 가지고 통일신라유적에서 가장 많이 출토되고 있는 완 중에서 특히, 대부완을 중심으로 지역적 변이와 시간적 변천과정을 살펴보았다. 또한 형태와 제작기법에 관한 분석을 통해 당시의 기술을 검토해 보았다.
      본고는 서울·경기지역의 총 23개 유적에서 출토된 139개체에 대한 분석결과를 토대로 통일신라 대부완의 특성을 파악하고, 대부완의 제작기술의 전개양상에 대한 분석하였다.
      대부완의 분석하는데 있어서 구연부와 문양을 가지고 나누었는데, 구연부는 3개의 형태로 분류하여 문양의 조성방법과 결합시켜, 총 5개의 형식으로 나누었다. 이는 시기적으로 총 5단계의 변화양상과 연동됨을 확인하였다.
      먼저 1단계는 A형식으로 직립구연에 단일문류인 수적형문이 유행하는 7세기 중후반에 해당되는 시기이다.
      2단계는 B형식으로 직립구연에 종장연속문의 출현부터 붕괴부터인 8세기 전·중반에 해당되는 시기이다.
      C형식에 해당하는 3단계는 구연단부에서 약하게 외반되며, 횡장연속문이 출현하면서 호선문이 유행하는 8세기 중후반이다.
      4단계는 D형식으로 구연 끝단이 외반되는 형태이면서 경질 무문이 다수이다. 대부완이 대형화되는 진행기에 해당되는 시기인 8세기 후반이다.
      끝으로 5단계는 E형식으로 9세기대에 해당한다. 구연부에서 신부까지 S자형태를 나타내며, 횡장연속문의 과도기로 파상문과 복합문이 병행한다. 대형화가 진행되었으면 연질무문이 다수이다.
      한편 대부완의 구연형태·문양의 조성방법 이외에도 제작기법 상에서도 시기적인 특징이 관찰됨을 주지하고 제작방법에 대해서도 살펴보았다. 특히 5단계에 해당되는 대부완에서 타날문과 포목흔이 나타나는 뚜렷한 특징이 확인된다. 저부 내외면에 격자타날로 두드리면서 물손질 과정을 거치지 않아 마지막 조정이 확인되는 예가 있으며, 또한 저부 내외면에 포목이 남아 있어, 제작 당시 점토를 붙지 않게 하기 위해 사용했던 흔적이 남아있다. 이러한 기법이 나타나는 대부완은 주로 연질에서 많이 확인되고 있으며, 주로 9세기대에 해당되는 대부완이 주류를 이룬다는 점이 특징이고, 이 시기에 독특한 제작기법이 나타나는 것으로 미루어 당시 제작공정에 큰 변화가 있었던 것으로 추정된다.
      즉 대부완은 일상 생활용품에서부터 부장용품에 이르기까지 다양하게 사용되었으며 이러한 사용양상은 출토유구를 통해 확인된다.
      가장 활발하게 사용된 용도는 식기였을 것으로 파악되며 분묘의 부장품·골호 등으로도 빈번하게 이용되었다. 특히 대부완은 완과 동일한 용도로 사용되었으나 문헌의 기록과 출토양상으로 보아 초기에는 서민의 일상용품이라기 보다는 상위층의 위세품적 성격이 강했을 것으로 추정된다. 하지만 9세기대에 들어와서는 인화문이 거의 사라지면서 일상적인 용기로 사용되었던 것으로 보인다.
      번역하기

      서울·경기지역에서 통일신라 유적이 발견되는 사례가 증가하면서 고분과 토기에 관한 관심은 더욱 높아졌으며, 그 결과 이 지역을 중심으로 신라의 영역화 과정이나, 유물의 전체적인 편년...

      서울·경기지역에서 통일신라 유적이 발견되는 사례가 증가하면서 고분과 토기에 관한 관심은 더욱 높아졌으며, 그 결과 이 지역을 중심으로 신라의 영역화 과정이나, 유물의 전체적인 편년연구가 진행되고 있다. 그러나 개별유물에 대한 집중적인 분석은 아직까지 축적된 연구가 미비한 실정이다.
      이러한 문제점을 가지고 통일신라유적에서 가장 많이 출토되고 있는 완 중에서 특히, 대부완을 중심으로 지역적 변이와 시간적 변천과정을 살펴보았다. 또한 형태와 제작기법에 관한 분석을 통해 당시의 기술을 검토해 보았다.
      본고는 서울·경기지역의 총 23개 유적에서 출토된 139개체에 대한 분석결과를 토대로 통일신라 대부완의 특성을 파악하고, 대부완의 제작기술의 전개양상에 대한 분석하였다.
      대부완의 분석하는데 있어서 구연부와 문양을 가지고 나누었는데, 구연부는 3개의 형태로 분류하여 문양의 조성방법과 결합시켜, 총 5개의 형식으로 나누었다. 이는 시기적으로 총 5단계의 변화양상과 연동됨을 확인하였다.
      먼저 1단계는 A형식으로 직립구연에 단일문류인 수적형문이 유행하는 7세기 중후반에 해당되는 시기이다.
      2단계는 B형식으로 직립구연에 종장연속문의 출현부터 붕괴부터인 8세기 전·중반에 해당되는 시기이다.
      C형식에 해당하는 3단계는 구연단부에서 약하게 외반되며, 횡장연속문이 출현하면서 호선문이 유행하는 8세기 중후반이다.
      4단계는 D형식으로 구연 끝단이 외반되는 형태이면서 경질 무문이 다수이다. 대부완이 대형화되는 진행기에 해당되는 시기인 8세기 후반이다.
      끝으로 5단계는 E형식으로 9세기대에 해당한다. 구연부에서 신부까지 S자형태를 나타내며, 횡장연속문의 과도기로 파상문과 복합문이 병행한다. 대형화가 진행되었으면 연질무문이 다수이다.
      한편 대부완의 구연형태·문양의 조성방법 이외에도 제작기법 상에서도 시기적인 특징이 관찰됨을 주지하고 제작방법에 대해서도 살펴보았다. 특히 5단계에 해당되는 대부완에서 타날문과 포목흔이 나타나는 뚜렷한 특징이 확인된다. 저부 내외면에 격자타날로 두드리면서 물손질 과정을 거치지 않아 마지막 조정이 확인되는 예가 있으며, 또한 저부 내외면에 포목이 남아 있어, 제작 당시 점토를 붙지 않게 하기 위해 사용했던 흔적이 남아있다. 이러한 기법이 나타나는 대부완은 주로 연질에서 많이 확인되고 있으며, 주로 9세기대에 해당되는 대부완이 주류를 이룬다는 점이 특징이고, 이 시기에 독특한 제작기법이 나타나는 것으로 미루어 당시 제작공정에 큰 변화가 있었던 것으로 추정된다.
      즉 대부완은 일상 생활용품에서부터 부장용품에 이르기까지 다양하게 사용되었으며 이러한 사용양상은 출토유구를 통해 확인된다.
      가장 활발하게 사용된 용도는 식기였을 것으로 파악되며 분묘의 부장품·골호 등으로도 빈번하게 이용되었다. 특히 대부완은 완과 동일한 용도로 사용되었으나 문헌의 기록과 출토양상으로 보아 초기에는 서민의 일상용품이라기 보다는 상위층의 위세품적 성격이 강했을 것으로 추정된다. 하지만 9세기대에 들어와서는 인화문이 거의 사라지면서 일상적인 용기로 사용되었던 것으로 보인다.

      더보기

      다국어 초록 (Multilingual Abstract) kakao i 다국어 번역

      This is a study about the attribute and manufacturing techniques of the footed-bowl in the Unified Silla. Its research object is 139 units that were excavated from 23 sites in Seoul and Gyounggi area.
      When analyze the footed-bowls, I divided into a part of mouth and patterns. the mouth of the bowl was classified 5 type through patterns and 3shapes of the mouth. timily, it is related with the change aspect of 5 stage.
      First of all, Stage 1. is the A type and the time which corresponds to the mid-latter in 7th century. At that time, the erect-mouth of a bowl and waterdrop patterns were widespread.
      Stage 2. is the B type which appeared length serial patterns with the erect-mouth of a bowl and the time which corresponds to the former-middle in 8th century.
      Stage 3. is the C type and the time which corresponds to the mid-latter in 8th century. At that time, the erect-mouth of a bowl was evaginated lightly and width serial patterns were widespread.
      Stage 4. is the D type, the erect-mouth and lip of a bowl were evaginated. At that time, there are lots of hardened-patternless bowls. Its size becomes larger than before stages' bowls. This time is 8th century latter.
      Finally, stage 5 is the E type, and its time is 9th. It shows S-shaped from mouth to body. This time is the transitional period of width serial patterns, go abreast with wave patterns and complex patterns. It has become bigger, and soft and patternless were majority.
      In addition to, I tried to look for the time feature through the manufacturing techniques. In particular, A footed-bowl of stage 5. has a obvious feature, such as the beating patterns and drapery trace. Because, After the last surface-modification, using lattice beating-paddle, of the inner-outer surface of the bottom, they did not pass on the process of water-rivision. And some of potteries are reminded drapery traces in the inner-outer surface of the bottom. it shows us to use the drapery for non-adhesion between potteries at that making time. The footed-bowl, which used these skills, is excavated sites of 9th century, mainly. It means that the manufacturing techniques is changed at that time. In other words, the footed-bowl has been used variety from personal care goods to burial goods. I could confirmed the using aspect through features which were excavated it.
      The most vigorous application is the dish for eating, moreover, it vary used burial goods of tombs and bone-bottle. Especially, the footed-bowl was used the same application with bowl. but, in the early period, I asummed that it used authority goods of high class than personal care goods of general classes.
      However, Comes in into the 9th century, flower-stamp patterns is almost disappeared and it has used personal care goods.
      번역하기

      This is a study about the attribute and manufacturing techniques of the footed-bowl in the Unified Silla. Its research object is 139 units that were excavated from 23 sites in Seoul and Gyounggi area. When analyze the footed-bowls, I divided into a p...

      This is a study about the attribute and manufacturing techniques of the footed-bowl in the Unified Silla. Its research object is 139 units that were excavated from 23 sites in Seoul and Gyounggi area.
      When analyze the footed-bowls, I divided into a part of mouth and patterns. the mouth of the bowl was classified 5 type through patterns and 3shapes of the mouth. timily, it is related with the change aspect of 5 stage.
      First of all, Stage 1. is the A type and the time which corresponds to the mid-latter in 7th century. At that time, the erect-mouth of a bowl and waterdrop patterns were widespread.
      Stage 2. is the B type which appeared length serial patterns with the erect-mouth of a bowl and the time which corresponds to the former-middle in 8th century.
      Stage 3. is the C type and the time which corresponds to the mid-latter in 8th century. At that time, the erect-mouth of a bowl was evaginated lightly and width serial patterns were widespread.
      Stage 4. is the D type, the erect-mouth and lip of a bowl were evaginated. At that time, there are lots of hardened-patternless bowls. Its size becomes larger than before stages' bowls. This time is 8th century latter.
      Finally, stage 5 is the E type, and its time is 9th. It shows S-shaped from mouth to body. This time is the transitional period of width serial patterns, go abreast with wave patterns and complex patterns. It has become bigger, and soft and patternless were majority.
      In addition to, I tried to look for the time feature through the manufacturing techniques. In particular, A footed-bowl of stage 5. has a obvious feature, such as the beating patterns and drapery trace. Because, After the last surface-modification, using lattice beating-paddle, of the inner-outer surface of the bottom, they did not pass on the process of water-rivision. And some of potteries are reminded drapery traces in the inner-outer surface of the bottom. it shows us to use the drapery for non-adhesion between potteries at that making time. The footed-bowl, which used these skills, is excavated sites of 9th century, mainly. It means that the manufacturing techniques is changed at that time. In other words, the footed-bowl has been used variety from personal care goods to burial goods. I could confirmed the using aspect through features which were excavated it.
      The most vigorous application is the dish for eating, moreover, it vary used burial goods of tombs and bone-bottle. Especially, the footed-bowl was used the same application with bowl. but, in the early period, I asummed that it used authority goods of high class than personal care goods of general classes.
      However, Comes in into the 9th century, flower-stamp patterns is almost disappeared and it has used personal care goods.

      더보기

      목차 (Table of Contents)

      • Ⅰ.머리말 = 1
      • Ⅱ.先行硏究의 檢討 = 5
      • Ⅲ.서울·京畿地域 臺附盌 出土狀況 = 9
      • 1.生産遺蹟 = 11
      • 2.關防遺蹟 = 13
      • Ⅰ.머리말 = 1
      • Ⅱ.先行硏究의 檢討 = 5
      • Ⅲ.서울·京畿地域 臺附盌 出土狀況 = 9
      • 1.生産遺蹟 = 11
      • 2.關防遺蹟 = 13
      • 3.生活遺蹟 = 19
      • 4.墳墓遺蹟 = 24
      • 5.其他 = 38
      • Ⅳ.臺附盌의 分類와 編年 = 39
      • 1.分類 = 39
      • 1)型式에 따른 分類 = 39
      • 2)크기에 따른 分類 = 42
      • 2.編年 = 44
      • Ⅴ.臺附盌의 製作技術分析 = 53
      • 1.成形技法 = 53
      • 2.整面技法 = 57
      • 3.裝飾技法 = 57
      • Ⅵ.맺음말 = 62
      • ▣ 부록 = 65
      • ▣ 參考文獻 = 74
      • 《Abstract》 = 81
      더보기

      분석정보

      View

      상세정보조회

      0

      Usage

      원문다운로드

      0

      대출신청

      0

      복사신청

      0

      EDDS신청

      0

      동일 주제 내 활용도 TOP

      더보기

      주제

      연도별 연구동향

      연도별 활용동향

      연관논문

      연구자 네트워크맵

      공동연구자 (7)

      유사연구자 (20) 활용도상위20명

      이 자료와 함께 이용한 RISS 자료

      나만을 위한 추천자료

      해외이동버튼