The (0.8BaTiO₃-0.1SrTiO₃-0.1MgTiO₃)+0.006Nb₂O5 ceramics were fabricated by conventional ceramic process. The dielectric property of specimen was investigated that the specimen was sintering temperature at 1,300℃ for 3hours and them annealed ...
http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
https://www.riss.kr/link?id=A2093891
오의균 (Department of Electrical Engineering, Changwon National University) ; 박태곤 (Department of Electrical Engineering, Changwon National University) ; 강도원 (Department of Electrical Engineering, Changwon National University) ; 오재유 (Department of Electrical Engineering, Changwon National University) ; 김범진 (Department of Electrical Engineering, Changwon National University)
1999
Korean
552
학술저널
262-264(3쪽)
0
상세조회0
다운로드다국어 초록 (Multilingual Abstract)
The (0.8BaTiO₃-0.1SrTiO₃-0.1MgTiO₃)+0.006Nb₂O5 ceramics were fabricated by conventional ceramic process. The dielectric property of specimen was investigated that the specimen was sintering temperature at 1,300℃ for 3hours and them annealed ...
The (0.8BaTiO₃-0.1SrTiO₃-0.1MgTiO₃)+0.006Nb₂O5 ceramics were fabricated by conventional ceramic process. The dielectric property of specimen was investigated that the specimen was sintering temperature at 1,300℃ for 3hours and them annealed at 1,100℃ for 3hours in a atmosphere (air) to be painted on the surface with CuO paste.
The results of the temperature and frequency are varied, the dielectric constant and loss tangent are unsuitable for BL capacitor. The dielectric constants were varied to be negative temperature coefficient(2,000∼3,000) in the temperature range between -10 and 140℃, the dissipation factors (tan δ) were some high(0.1∼0.3). It was not grain insulation, in cause of the some difficult to be annealed temperature with CuO paste and fired atmosphere. But, we have some different annealing temperature and fired atmosphere. it will be suitable BL(Boundary Layer)capacitor.
공간고조파해석법을 이용한 영구자석 선형 동기전동기의 특성해석
내열 내식용 Cr-Al반강자성계 스핀밸브막의 거대자기저항 효과
다대담당이 기능한 작업장에서 작업자 부하균형을 고려한 작업할당문제