A review on carbon fiber-reinforced hierarchical composites: mechanical performance, manufacturing process, structural applications and allied challenges

다국어 초록 (Multilingual Abstract)

The utilization of carbonaceous reinforcement-based polymer matrix composites in structural applications has become a hot topic in composite research. Although conventional carbon fiber-reinforced polymer composites (CFRPs) have revolutionized the composite industry by offering unparalleled features, they are often plagued with a weak interface and lack of toughness. However, the promising aspects of carbon fiber-based fiber hybrid composites and hierarchical composites can compensate for these setbacks. This review provides a meticulous landscape and recent progress of polymer matrix-based different carbonaceous (carbon fiber, carbon nanotube, graphene, and nanodiamond) fillers reinforced composites’ mechanical properties. First, the mechanical performance of neat CFRP was exhaustively analyzed, attributing parameters were listed down, and CFRPs’ mechanical performance barriers were clearly outlined. Here, short carbon fiber-reinforced thermoplastic composite was distinguished as a prospective material. Second, the strategic advantages of fiber hybrid composites over conventional CFRP were elucidated. Third, the mechanical performance of hierarchical composites based on carbon nanotube (1D), graphene (2D) and nanodiamond (0D) was expounded and evaluated against neat CFRP. Fourth, the review comprehensively discussed different fabrication methods, categorized them according to performance and suggested potential future directions. From here, the review sorted out three-dimensional printing (3DP) as the most futuristic fabrication method and thoroughly delivered its pros and cons in the context of the aforementioned carbonaceous materials. To conclude, the structural applications, current challenges and future prospects pertinent to these carbonaceous fillers reinforced composite materials were elaborated

참고문헌 (Reference)

1 Czech B, "Visible-light-driven photocatalytic removal of acetaminophen from water using a novel MWCNT-TiO2-SiO2 photocatalysts" 206 : 343-355, 2018

2 Patton RD, "Vapor grown carbon fiber composites with epoxy and poly(phenylene sulfide)matrices" 30 (30): 1081-1091, 1999

3 Hongkarnjanakul N, "Validation of low velocity impact modelling on different stacking sequences of CFRP laminates and influence of fibre failure" 106 : 549-559, 2013

4 Díez-Pascual AM, "Tuning the properties of carbon fiber-reinforced poly(phenylene sulphide)laminates via incorporation of inorganic nanoparticles" 53 (53): 2369-2378, 2012

5 Ayatollahi MR, "Tribological and mechanical properties of low content nanodiamond/epoxy nanocomposites" 43 (43): 3425-3430, 2012

6 Matsuzaki R, "Threedimensional printing of continuous-fiber composites by in-nozzle impregnation" 6 : 23058-, 2016

7 Eslami Z, "Thermal and mechanical properties of phenolic-based composites reinforced by carbon fibres and multiwall carbon nanotubes" 72 : 22-31, 2015

8 Zhang Q, "The" black revolution" of sports equipment:application of carbon fiber-reinforced plastics (CFRP)" 440 : 69-73, 2014

9 Bøggild P, "The war on fake graphene" 562 : 502-503, 2018

10 Young RJ, "The microstructure of a graphene-reinforced tennis racquet" 51 (51): 3861-3867, 2016

11 Grzanka R, "The greening of carbon fibre" 58 (58): 44-46, 2014

12 Hu C, "The fabrication and characterization of high density polyethylene composites reinforced by carbon nanotube coated carbon fibers" 121 : 149-156, 2019

13 Nie HJ, "The effect of graphene oxide modified short carbon fiber on the interlaminar shear strength of carbon fiber fabric/epoxy composites" 56 (56): 488-496, 2021

14 Kiran MD, "Tensile and impact strength of nickel coated short carbon fiber reinforced polyester composite" 52 (52): 1011-1013, 2022

15 Yu T, "Tensile and flexural behaviors of additively manufactured continuous carbon fiberreinforced polymer composites" 225 : 111147-, 2019

16 정순영 ; 박세계 ; 김한도 ; 이동윤 ; 윤승화, "Synergetic effect of cross-linking and interfacial interaction in carbon fiber reinforced thermoplastic to enhance its tensile strength by electron-beam irradiation" 한국탄소학회 30 (30): 165-175, 2020

17 Jing W, "Surface modification of carbon fibers and the selective laser sintering of modified carbon fiber/nylon 12 composite powder" 116 : 253-260, 2017

18 Haleem YA, "Surface functionalization and structure characterizations of nanodiamond and its epoxy based nanocomposites" 78 : 480-487, 2015

19 Xiao C, "Study on interfacial and mechanical improvement of carbon fiber/epoxy composites by depositing multi-walled carbon nanotubes on fibers" 703 : 8-16, 2018

20 Kurkin TS, "Structure of oriented fibers based on poly(vinyl alcohol)modified by detonation nanodiamonds" 50 (50): 43-50, 2008

21 Burkov MV, "Structure and Properties of SWCNT-Modified CFRP" 1-5, 2019

22 Colemam JN, "Small but strong : a review of the mechanical properties of carbon nanotubes-polymer composites" 44 (44): 1624-1652, 2006

23 Ozdemir S, "Simultaneous preconcentrations of Co2+, Cr6+, Hg2+ and Pb2+ ions by Bacillus altitudinis immobilized nanodiamond prior to their determinations in food samples by ICP-OES" 215 : 447-453, 2017

24 Brunnacker L, "Short carbon fiber-reinforced thermoplastic composites for jet engine components" LuleåUniversity of Technology 2019

25 Keith JM, "Shielding effectiveness density theory for carbon fiber/nylon 6, 6 composites" 26 (26): 671-678, 2005

26 Hegde S, "Review on carbon fiber-reinforced polymer(CFRP)and their mechanical performance" 19 (19): 658-662, 2019

27 Al-Saleh MH, "Review of the mechanical properties of carbon nanofiber/polymer composites" 42 (42): 2126-2142, 2011

28 Muller J, "Respiratory toxicity of carbon nanotubes : how worried should we be?" 44 (44): 1048-1056, 2006

29 Xu Z, "Research progress on key problems of nanomaterialsmodified geopolymer concrete" 10 (10): 779-792, 2021

30 Khan M, "Reinforcement effect of acid modified nanodiamond in epoxy matrix for enhanced mechanical and electromagnetic properties" 78 : 58-66, 2017

31 Joost WJ, "Reducing vehicle weight and improving US energy efficiency using integrated computational materials engineering" 64 (64): 1032-1038, 2012

32 Bledzki AK, "Recycling of carbon fiber reinforced composite polymers—review—part 1 : volume of production, recycling technologies, legislative aspects" 13 (13): 300-, 2021

33 Tian X, "Recycling and remanufacturing of 3D printed continuous carbon fiber-reinforced PLA composites" 142 : 1609-1618, 2017

34 Pakdel E, "Recent progress in recycling carbon fibre reinforced composites and dry carbon fibre wastes" 166 : 105340-, 2020

35 Goh GD, "Recent progress in additive manufacturing of fiber-reinforced polymer composite" 4 (4): 1800271-, 2019

36 Serag Eman ; El-Maghraby Azza ; El Nemr Ahmed, "Recent developments in the application of carbon-based nanomaterials in implantable and wearable enzyme-biofuel cells" 한국탄소학회 32 (32): 395-412, 2022

37 Li N, "Rapid prototyping of continuous carbon fiber-reinforced polylactic acid composites by 3D printing" 238 : 218-225, 2016

38 Striemann P, "Quasi-static characterization of polyamide-based discontinuous CFRP manufactured by additive manufacturing and injection molding" 809 : 386-391, 2019

39 Liao G, "Properties of oriented carbon fiber/polyamide 12 composite parts fabricated by fused deposition modeling" 139 : 283-292, 2018

40 Gupta A, "Processing, mechanical characterization, and micrography of 3D-printed short carbon fiber-reinforced polycarbonate polymer matrix composite material" 107 (107): 3185-3205, 2020

41 Rimašauskas M, "Processing of carbon fiber for 3D printed continuous composite structures" 34 (34): 1528-1536, 2019

42 Das TK, "Preparation, development, outcomes, and application versatility of carbon fiber-based polymer composites : a review" 2 (2): 214-233, 2019

43 Yan C, "Preparation, characterisation and processing of carbon fibre/polyamide-12 composites for selective laser sintering" 71 (71): 1834-1841, 2011

44 He P, "Preparation of multiscale graphene oxide-carbon fabric and its effect on mechanical properties of hierarchical epoxy resin composite" 37 (37): 1515-1522, 2016

45 Sun Z, "Preparation of high-performance carbon fiber-reinforced epoxy composites by compression resin transfer molding" 12 (12): 13-, 2019

46 Ashori A, "Preparation and characterization of functionalized graphene oxide/carbon fiber/epoxy nanocomposites" 48 : 82-88, 2015

47 Mobina Alimohammady, "Preparation and characterization of functionalized MWCNTs-COOH with 3-amino-5-phenylpyrazole as an adsorbent and optimization study using central composite design" Springer Science and Business Media LLC 29 (29): 1-20, 2019

48 Suzuki T, "Prediction of energy intensity of carbon fiber-reinforced plastics for mass-produced passenger cars" 14-19, 2005

49 Karami P, "Polymer/nanodiamond composites-a comprehensive review from synthesis and fabrication to properties and applications" 269 : 122-151, 2019

50 Morimune S, "Poly(vinyl alcohol)nanocomposites with nanodiamond" 44 (44): 4415-4421, 2011

51 Zhang J, "Performance of 3D-printed continuous-carbon-fiber-reinforced plastics with pressure" 13 (13): 471-, 2020

52 Lee W, "Partially reduced graphene oxide as a multi-functional sizing agent for carbon fiber composites by electrophoretic deposition" 3 (3): 25609-25613, 2013

53 Jureczko ME, "Optimisation of wind turbine blades" 167 (167): 463-471, 2005

54 Ismail A. H. Muhammad ; AL-Oqla Faris M. ; Risby M. S. ; Sapuan S. M., "On the enhancement of the fatigue fracture performance of polymer matrix composites by reinforcement with carbon nanotubes: a systematic review" 한국탄소학회 32 (32): 727-740, 2022

55 Shofner ML, "Nanofiber-reinforced polymers prepared by fused deposition modeling" 89 (89): 3081-3090, 2003

56 Zanjani JS, "Nanoengineered design and manufacturing of high-performance epoxy matrix composites with carbon fiber/selectively integrated graphene as multi-scale reinforcements" 6 (6): 9495-9506, 2016

57 Behler KD, "Nanodiamond-polymer composite fibers and coatings" 3 (3): 363-369, 2009

58 Hens SC, "Nanodiamond-assisted dispersion of carbon nanotubes and hybrid nanocarbon-based composites" 3 (3): 75-82, 2011

59 Zhang Y, "Nanodiamond nanoclusterdecorated graphene oxide/epoxy nanocomposites with enhanced mechanical behavior and thermal stability" 114 : 111-120, 2017

60 Jiang S, "Multiscale graphene oxide–carbon fiber reinforcements for advanced polyurethane composites" 87 : 1-9, 2016

61 Bekyarova E, "Multiscale carbon nanotube-carbon fiber reinforcement for advanced epoxy composites" 23 (23): 3970-3974, 2007

62 Karami P, "Morphological and mechanical properties of polyamide 6/nanodiamond composites prepared by melt mixing : effect of surface functionality of nanodiamond" 66 (66): 557-565, 2017

63 Oztan C, "Microstructure and mechanical properties of three dimensional-printed continuous fiber composites" 53 (53): 271-280, 2019

64 Sandberg M, "Mechanics of materials in modern manufacturing methods and processing techniques" Elsevier 173-195, 2020

65 Zhao Z, "Mechanical, thermal and interfacial performances of carbon fiber-reinforced composites flavored by carbon nanotube in matrix/interface" 159 : 761-772, 2017

66 Pei S, "Mechanical properties prediction of injection molded short/long carbon fiber reinforced polymer composites using micro X-ray computed tomography" 130 : 105732-, 2020

67 Tibbetts GG, "Mechanical properties of vaporgrown carbon fiber composites with thermoplastic matrices" 14 (14): 2871-2880, 1999

68 Jee AY, "Mechanical properties of polycarbonate and poly(methyl methacrylate)films reinforced with surfacefunctionalized nanodiamonds" 11 (11): 533-536, 2011

69 Maitra U, "Mechanical properties of nanodiamond-reinforced polymer-matrix composites" 149 (149): 1693-1697, 2009

70 Suk JW, "Mechanical properties of monolayer graphene oxide" 4 (4): 6557-6564, 2010

71 Bhagwat PM, "Mechanical properties of hybrid glass/carbon fiber-reinforced epoxy composites" 4 (4): 7375-7380, 2017

72 Liu F, "Mechanical properties of epoxy and its carbon fiber composites modified by nanoparticles" 2017 : 9-, 2017

73 Jagannatha TD, "Mechanical properties of carbon/glass fiber-reinforced epoxy hybrid polymer composites" 4 (4): 131-137, 2015

74 Anuar H, "Mechanical properties and dynamic mechanical analysis of thermoplastic-natural-rubber-reinforced short carbon fiber and kenaf fiber hybrid composites" 107 (107): 4043-4052, 2007

75 Subhani T, "Mechanical performance of epoxy matrix hybrid nanocomposites containing carbon nanotubes and nanodiamonds" 87 : 436-444, 2015

76 Rahmanian S, "Mechanical characterization of epoxy composite with multiscale reinforcements : carbon nanotubes and short carbon fibers" 60 : 34-40, 2014

77 Heidari-Rarani M, "Mechanical characterization of FDM 3D printing of continuous carbon fiber-reinforced PLA composites" 175 : 107147-, 2019

78 Visweswaraiah SB, "Mechanical characterisation and modelling of randomly oriented strand architecture and their hybrids—a general review" 37 (37): 548-580, 2018

79 Gangineni PK, "Mechanical behavior of Graphene decorated carbon fiber-reinforced polymer composites : an assessment of the influence of functional groups" 122 : 36-44, 2019

80 Tariq F, "Mechanical and thermal properties of multi-scale carbon nanotubes-carbon fiber-epoxy composite" 43 (43): 5937-5948, 2018

81 Li Y, "Mechanical and electromagnetic interference shielding properties of carbon fiber/graphene nanosheets/epoxy composite" 37 (37): 2494-2502, 2016

82 Qin W, "Mechanical and electrical properties of carbon fiber composites with incorporation of graphene nanoplatelets at the fiber–matrix interphase" 69 : 335-341, 2015

83 Zhang S, "Measuring the specific surface area of monolayer graphene oxide in water" 261 : 127098-, 2020

84 Thomas GP, "Materials used in formula one (F1) CARS"

85 Rajak DK, "Manufacturing technologies of carbon/glass fiber-reinforced polymer composites and their properties : a review" 13 (13): 3721-, 2021

86 Advani SG, "Manufacturing techniques for polymer matrix composites (PMCs)" Elsevier 2012

87 Song YS, "Life cycle energy analysis of fiber-reinforced composites" 40 (40): 1257-1265, 2009

88 Negarestani R, "Laser cutting of carbon fibre-reinforced polymer composite materials" University of Manchester 2011

89 오윤 ; 강정석 ; 강창수 ; 권기철 ; 이교우, "Investigation of mechanical, thermal and electrical properties of hybrid composites reinforced with multi-walled carbon nanotubes and fused silica particles" 한국탄소학회 30 (30): 353-365, 2020

90 Verdejo de Toro E, "Investigation of a short carbon fibre-reinforced polyamide and comparison of two manufacturing processes : fused deposition modelling(FDM)and polymer injection moulding(PIM)" 13 (13): 672-, 2020

91 Rajasekaran T. ; Palanikumar K. ; Latha B., "Investigation and analysis of surface roughness in machining carbon fiber reinforced polymer composites using artificial intelligence techniques" 한국탄소학회 32 (32): 615-627, 2022

92 Yavas D, "Interlaminar shear behavior of continuous and short carbon fiber reinforced polymer composites fabricated by additive manufacturing" 204 : 108460-, 2021

93 Zhang X, "Interfacial microstructure and properties of carbon fiber composites modified with graphene oxide" 4 (4): 1543-1552, 2012

94 Li M, "Interfacial improvement of carbon fiber/epoxy composites using a simple process for depositing commercially functionalized carbon nanotubes on the fibers" 52 : 109-121, 2013

95 Deng C, "Influence of surface properties of graphene oxide/carbon fiber hybrid fiber by oxidative treatments combined with electrophoretic deposition" 48 (48): 212-217, 2016

96 Deng C, "Influence of graphene oxide coatings on carbon fiber by ultrasonically assisted electrophoretic deposition on its composite interfacial property" 272 : 176-181, 2015

97 Jiang J, "Influence of electrochemical oxidation of carbon fiber on the mechanical properties of carbon fiber/graphene oxide/epoxy composites" 95 : 248-256, 2017

98 Zhang W, "Improving interfacial and mechanical properties of carbon nanotube-sized carbon fiber/epoxy composites" 145 : 629-639, 2019

99 Davis DC, "Improvements in mechanical properties of a carbon fiber epoxy composite using nanotube science and technology" 92 (92): 2653-2662, 2010

100 권동준 ; 박성민 ; 권일준 ; 박종만 ; 정의경, "Improvement of interlaminar properties of carbon fiber‑reinforced epoxy composites using aluminum trihydroxide" 한국탄소학회 29 (29): 183-191, 2019

101 Wang F, "Improvement of mechanical properties and thermal conductivity of carbon fiber laminated composites through depositing graphene nanoplatelets on fibers" 54 (54): 3847-3862, 2019

102 Zhai YJ, "Improved mechanical properties of epoxy reinforced by low content nanodiamond powder" 528 (528): 7295-7300, 2011

103 Pathak AK, "Improved mechanical properties of carbon fiber/graphene oxideepoxy hybrid composites" 135 : 28-38, 2016

104 Xu J, "Improved interfacial shear strength of carbon fiber/polyphenylene sulfide composites by graphene" 29 (29): 913-921, 2017

105 Zhang W, "Improved interfacial properties of carbon fiber composites by building stress transition layer with carbon nanotubes" 37 (37): 2510-2519, 2018

106 Caminero MA, "Impact damage resistance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling" 148 : 93-103, 2018

107 Chabaud G, "Hygromechanical properties of 3D printed continuous carbon and glass fibre reinforced polyamide composite for outdoor structural applications" 26 : 94-105, 2019

108 Asim M, "Hybrid polymer composite materials" Elsevier 1-22, 2017

109 Fu SY, "Hybrid effects on tensile properties of hybrid short-glass-fiberand short-carbon-fiber-reinforced polypropylene composites" 36 (36): 1243-1251, 2001

110 Pandya KS, "Hybrid composites made of carbon and glass woven fabrics under quasi-static loading" 32 (32): 4094-4099, 2011

111 Zhang J, "Hybrid composite laminates reinforced with glass/carbon woven fabrics for lightweight load bearing structures" 36 : 75-80, 2012

112 Tekinalp HL, "Highly oriented carbon fiber–polymer composites via additive manufacturing" 105 : 144-150, 2014

113 Elkington M, "Hand layup : understanding the manual process" 1 (1): 138-151, 2015

114 Li F, "Greatly enhanced cryogenic mechanical properties of short carbon fiber/polyethersulfone composites by graphene oxide coating" 89 : 47-55, 2016

115 Pramoda K, "Graphene/single-walled carbon nanotube composites generated by covalent cross-linking" 10 (10): 2147-2152, 2015

116 Dai G, "Graphene reinforced nanocomposites : 3D simulation of damage and fracture" 95 : 684-692, 2014

117 Valorosi F, "Graphene and related materials in hierarchical fiber composites : production techniques and key industrial benefits" 185 : 107848-, 2020

118 Holmes M, "Global carbon fibre market remains on upward trend" 58 (58): 38-45, 2014

119 Meng F, "From aviation to aviation : environmental and financial viability of closed-loop recycling of carbon fibre composite" 200 : 108362-, 2020

120 Akasheh F, "Fracture toughness enhancement of carbon fiber–reinforced polymer composites utilizing additive manufacturing fabrication" 51 (51): 698-711, 2019

121 Guo Qitao ; Xiao Bohan ; Ohsawa Isamu ; Takahashi Jun, "Fracture mechanism characteristics of ultra-thin chopped carbon fiber tape-reinforced thermoplastics hat-shaped hollow beam under transverse static and impact loadings" 한국탄소학회 30 (30): 271-280, 2020

122 Hong SH, "Flow-induced alignment of disk-like graphene oxide particles in isotropic and biphasic colloids" 610 (610): 68-76, 2015

123 Wang K, "Flexure behaviors of ABS-based composites containing carbon and Kevlar fibers by material extrusion 3D printing" 11 (11): 1878-, 2019

124 Yi Ying ; Wang Bo ; Liu Xingyue ; Li Changping, "Flexible piezoresistive strain sensor based on CNTs–polymer composites: a brief review" 한국탄소학회 32 (32): 713-726, 2022

125 Firmo JP, "Fire behaviour of reinforced concrete beams strengthened with CFRP laminates : protection systems with insulation of the anchorage zones" 43 (43): 1545-1556, 2016

126 Swolfs Y, "Fibre hybridisation in polymer composites : a review" 67 : 181-200, 2014

127 Cauich-Cupul Javier I. ; Herrera-Franco Pedro J. ; García-Hernández Edgar ; Moreno-Chulim Veronica ; Valadez-González Alex, "Factorial design approach to assess the effect of fiber–matrix adhesion on the IFSS and work of adhesion of carbon fiber/polysulfone-modified epoxy composites" 한국탄소학회 29 (29): 345-358, 2019

128 Dickson AN, "Fabrication of continuous carbon, glass and Kevlar fibre reinforced polymer composites using additive manufacturing" 16 : 146-152, 2017

129 Choi EY, "Fabrication of carbon fiber grafted with acyl chloride functionalized multi-walled carbon nanotubes for mechanical reinforcement of nylon 6, 6" 178 : 33-40, 2019

130 Ramana MV, "Experimental investigation on jute/carbon fibre reinforced epoxy based hybrid composites" 4 (4): 8654-8664, 2017

131 Alcudia-Zacarías E, "Experimental assessment of residual integrity and balanced mechanical properties of GFRP/CFRP hybrid laminates under tensile and flexural conditions" 27 (27): 895-914, 2020

132 Liu H, "Experimental and numerical studies on the impact response of damage-tolerant hybrid unidirectional/woven carbon-fibre reinforced composite laminates" 136 : 101-118, 2018

133 Araya-Calvo M, "Evaluation of compressive and flexural properties of continuous fiber fabrication additive manufacturing technology" 22 : 157-164, 2018

134 Elagib Tienah H. H. ; Hassan Elwathig A. M. ; Liu Baihua ; Han Keqing ; Yu Muhuo, "Evaluation of composite PAN fibers incorporated with carbon nanotubes and titania and their performance during the microwave-induced pre-oxidation" 한국탄소학회 30 (30): 235-245, 2020

135 Melenka GW, "Evaluation and prediction of the tensile properties of continuous fiber-reinforced 3D printed structures" 153 : 866-875, 2016

136 Quan D, "Enhancing mode-I and mode-II fracture toughness of epoxy and carbon fibre reinforced epoxy composites using multi-walled carbon nanotubes" 143 : 81-92, 2018

137 Ashrafi B, "Enhancement of mechanical performance of epoxy/carbon fiber laminate composites using single-walled carbon nanotubes" 71 (71): 1569-1578, 2011

138 Badakhsh A, "Enhanced surface energetics of CNT-grafted carbon fibers for superior electrical and mechanical properties in CFRPs" 12 (12): 1432-, 2020

139 Li F, "Enhanced mechanical properties of short carbon fiber-reinforced polyethersulfone composites by graphene oxide coating" 59 : 155-165, 2015

140 Al Abadi H, "Elastic properties of 3D printed fibre-reinforced structures" 193 : 8-18, 2018

141 Ghaemi F, "Effects of the surface modification of carbon fiber by growing different types of carbon nanomaterials on the mechanical and thermal properties of polypropylene" 5 (5): 28822-28831, 2015

142 Karsli NG, "Effects of maleated polypropylene on the morphology, thermal and mechanical properties of short carbon fiber-reinforced polypropylene composites" 32 (32): 4069-4073, 2011

143 Wan Y, "Effects of curvature on strength and damage modes of L-shaped carbon fiberreinforced polypropylene" 33 (33): 1305-1315, 2014

144 Li F, "Effectively enhanced mechanical properties of injection molded short carbon fiber-reinforced polyethersulfone composites by phenolformaldehyde resin sizing" 139 : 216-226, 2018

145 Chen B, "Effect of the characteristic size and content of graphene on the crack propagation path of alumina/graphene composite ceramics" 14 (14): 611-, 2021

146 Subagia IA, "Effect of stacking sequence on the flexural properties of hybrid composites reinforced with carbon and basalt fibers" 58 : 251-258, 2014

147 Caminero MA, "Effect of stacking sequence on Charpy impact and flexural damage behavior of composite laminates" 136 : 345-357, 2016

148 Shazed MA, "Effect of fibre coating and geometry on the tensile properties of hybrid carbon nanotube coated carbon fibre reinforced composite" 54 : 660-669, 2014

149 Cruz H, "Effect of aspect ratio on electrical, rheological and glass transition properties of PC/MWCNT nanocomposites" 18 (18): 943-950, 2018

150 Srikanth I, "Effect of amino functionalized MWCNT on the crosslink density, fracture toughness of epoxy and mechanical properties of carbon–epoxy composites" 43 (43): 2083-2086, 2012

151 Dydek K, "Effect of SWCNT-tuball paper on the lightning strike protection of CFRPs and their selected mechanical properties" 14 (14): 3140-, 2021

152 Junaedi H, "Ductile to brittle transition of short carbon fiber-reinforced polypropylene composites" 2020 : 1-11, 2020

153 손연선 ; 김동건 ; Ji Ho Lee ; 이수진 ; 황인선 ; 이수형 ; 유성종 ; 김필, "Defect-controlled Fe-N-doped carbon nanofiber by ball-milling for oxygen reduction reaction" 한국화학공학회 37 (37): 938-945, 2020

154 Hosseinzadeh R, "Damage behavior of fiber-reinforced composite plates subjected to drop weight impacts" 66 (66): 61-68, 2006

155 Zhang J, "Current status of carbon fibre and carbon fibre composites recycling" 193 : 108053-, 2020

156 Mochalin VN, "Covalent incorporation of aminated nanodiamond into an epoxy polymer network" 5 (5): 7494-7502, 2011

157 Ekşı S, "Comparison of mechanical properties of unidirectional and woven carbon, glass and aramid fiber-reinforced epoxy composites" 132 (132): 879-882, 2017

158 Kumar C, "Combined effect of loading rate and percentage by weight of MWCNTs on inter laminar shear strength (ILSS) and flexural strength of CFRP" 1-12, 2018

159 Ye S, "Clay–graphene oxide liquid crystals and their aerogels : synthesis, characterization and properties" 6 (6): 181439-, 2019

160 Goh GD, "Characterization of mechanical properties and fracture mode of additively manufactured carbon fiber and glass fiber-reinforced thermoplastics" 137 : 79-89, 2018

161 Khair N, "Carbon-based electronic textiles : materials, fabrication processes and applications" 54 (54): 10079-10101, 2019

162 Ramesh M. ; Rajeshkumar L. ; Bhoopathi R., "Carbon substrates: a review on fabrication, properties and applications" 한국탄소학회 31 (31): 557-580, 2021

163 Gupta Nikita ; Gupta Shipra Mital ; Sharma S. K., "Carbon nanotubes: synthesis, properties and engineering applications" 한국탄소학회 29 (29): 419-447, 2019

164 Qian H, "Carbon nanotube-based hierarchical composites : a review" 20 (20): 4751-4762, 2010

165 Kumar A, "Carbon nanotube-and graphene-reinforced multiphase polymeric composites : review on their properties and applications" 55 (55): 2682-2724, 2020

166 Kishi H, "Carbon fiber-reinforced thermoplastic composites from acrylic polymer matrices : interfacial adhesion and physical properties" 11 (11): 334-342, 2017

167 Friedrich K, "Carbon fiber-reinforced thermoplastic composites for future automotive applications" 1-4, 2016

168 Sharma M, "Carbon fiber surfaces and composite interphases" 102 : 35-50, 2014

169 이동규 ; 김영은 ; 권오형 ; 박원호 ; 조동환, "Carbon fiber coating with MWCNT in the presence of polyethyleneimine of different molecular weights and the effect on the interfacial shear strength of thermoplastic and thermosetting carbon fiber composites" 한국탄소학회 31 (31): 407-417, 2021

170 Rahmanian S, "Carbon and glass hierarchical fibers : influence of carbon nanotubes on tensile, flexural and impact properties of short fiber-reinforced composites" 43 : 10-16, 2013

171 Mason H, "CNT-enhanced carbon fiber strengthens mountain bike team’s race wheels|CompositesWorld"

172 Luo WE, "Application and research on building 3D printing" 7 (7): 564-578, 2020

173 Ambigai R, "Analysis on mechanical and thermal properties of glass-carbon/epoxy based hybrid composites" 1-12, 2018

174 Kulkarni P, "An overview of the formation of fibre waviness and its effect on the mechanical performance of fibre reinforced polymer composites" 137 : 106013-, 2020

175 Atas C, "An experimental investigation on the low velocity impact response of composite plates repaired by VARIM and hand lay-up processes" 93 (93): 1178-1186, 2011

176 Meng F, "An assessment of financial viability of recycled carbon fibre in automotive applications" 109 : 207-220, 2018

177 Kozior T, "Adhesion of threedimensional printing on textile fabrics : inspiration from and for other research areas" 15 : 1558925020910875-, 2020

178 Chacón JM, "Additive manufacturing of continuous fibre reinforced thermoplastic composites using fused deposition modelling : effect of process parameters on mechanical properties" 181 : 107688-, 2019

179 Ning F, "Additive manufacturing of carbon fiber-reinforced thermoplastic composites using fused deposition modeling" 80 : 369-378, 2015

180 Davis DC, "A strategy for improving mechanical properties of a fiber-reinforced epoxy composite using functionalized carbon nanotubes" 71 (71): 1089-1097, 2011

181 Williams G, "A self-healing carbon fibre reinforced polymer for aerospace applications" 38 (38): 1525-1532, 2007

182 Masilamani R, "A review on usage of carbon fiber-reinforced plastics in automobiles" 117 (117): 537-544, 2017

183 Kumar Amit ; Sharma Kamal ; Dixit Amit Rai, "A review on the mechanical properties of polymer composites reinforced by carbon nanotubes and graphene" 한국탄소학회 31 (31): 149-165, 2021

184 Jabeen S, "A review on polymeric nanocomposites of nanodiamond, carbon nanotube, and nanobifiller : structure, preparation and properties" 54 (54): 1379-1409, 2015

185 Karataş MA, "A review on machinability of carbon fiber-reinforced polymer(CFRP)and glass fiberreinforced polymer(GFRP)composite materials" 14 (14): 318-326, 2018

186 Parandoush P, "A review on additive manufacturing of polymer-fiber composites" 182 : 36-53, 2017

187 Kumar A, "A review of the mechanical and thermal properties of graphene and its hybrid polymer nanocomposites for structural applications" 54 (54): 5992-6026, 2019

188 Narayana KJ, "A review of recent research on multifunctional composite materials and structures with their applications" 5 (5): 5580-5590, 2018

189 Raya Indah ; Kzar Hamzah H. ; Mahmoud Zaid Hameed ; Al Ayub Ahmed Alim ; Ibatova Aygul Z. ; Kianfar Ehsan, "A review of gas sensors based on carbon nanomaterial" 한국탄소학회 32 (32): 339-364, 2022

190 Yan Yuxin ; Shin Woo In ; Chen Hao ; Lee Shar-Mun ; Manickam Sivakumar ; Hanson Svenja ; Zhao Haitao ; Lester Edward ; Wu Tao ; Pang Cheng Heng, "A recent trend: application of graphene in catalysis" 한국탄소학회 31 (31): 177-199, 2021

191 Yu H, "A novel multi-cell CFRP/AA6061hybrid tube and its structural multiobjective optimization" 209 : 579-589, 2019

192 Chen L, "A design of gradient interphase reinforced by silanized graphene oxide and its effect on carbon fiber/epoxy interface" 145 (145): 186-196, 2014

193 Kabir SF, "A critical review on 3D printed continuous fiber-reinforced composites : history, mechanism, materials and properties" 232 : 111476-, 2020

194 Zhang Y, "A critical review of nanodiamond based nanocomposites : synthesis, properties and applications" 143 : 19-27, 2018

195 Crawford B, "A Bayesian belief approach to quality control of resin transfer molding process" 109 (109): 1953-1968, 2020

196 Dip TM, "3D printing technology for textiles and fashion" 52 (52): 167-260, 2020

197 Chatterjee K, "3D printing of textiles : potential roadmap to printing with fibers" 32 (32): 1-24, 2020

198 Wang X, "3D printing of polymer matrix composites : a review and prospective" 110 : 442-458, 2017

199 Van Der Klift F, "3D printing of continuous carbon fibre reinforced thermo-plastic(CFRTP)tensile test specimens" 6 (6): 18-27, 2016

200 Yang C, "3D printing for continuous fiber-reinforced thermoplastic composites : mechanism and performance" 23 (23): 209-215, 2017