80 일간의 운전 결과 본 MLE 공정 내 Al(III) 계 응집재인 PAC 를 주입한 결과 유기물 제거에는 영향을 미치지 않는 것으로 나타났다. 다만 단일 반응조 내에서 Al(III) 이 수화물 및 침전물 형태로 ...
http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
https://www.riss.kr/link?id=A100681926
2015
Korean
학술저널
15-22(8쪽)
0
상세조회0
다운로드국문 초록 (Abstract)
80 일간의 운전 결과 본 MLE 공정 내 Al(III) 계 응집재인 PAC 를 주입한 결과 유기물 제거에는 영향을 미치지 않는 것으로 나타났다. 다만 단일 반응조 내에서 Al(III) 이 수화물 및 침전물 형태로 ...
80 일간의 운전 결과 본 MLE 공정 내 Al(III) 계 응집재인 PAC 를 주입한 결과 유기물 제거에는 영향을 미치지 않는 것으로 나타났다. 다만 단일 반응조 내에서 Al(III) 이 수화물 및 침전물 형태로 장기적인 축적으로 미생물의 대사활동에 영향을 미친 것으로 보고되었지만 본 실험에서는 무산소조, 호기조 및 침전조 등 일련의 연속공정으로 구성한 결과 실제Al(III) 축적에 의한 영호t은 관찰되지 않았다. 또한 질소 재거에 있어서도 유기물과 마찬가지로 제거효율 영향은 거의 없다 즉, TN 제거효율은 각각 Run 1 70%, Run 2 73%, Run 3 78%이였으며, 마지막으로 Al/P몰비 5인 Run 4에서는 70% TN 제거효율을 나타내었다. 인의 경우 Run 1에서는 인 제거가 이루어지지 않음을 관찰할 수가 있다. 하지만 Al/P몰비를 3.6,4,5로 응집제를 주입한 Run 2, Run 3 및 Run 4에서는 각각 92%, 96%, 97%의 높은 인 제거효율을 나타내었다. 그 외 DO농도 3.0~4.0 mg/L의 조사결과로부터 농어촌진흥원 회분식 실험결과 Al/P 몰비 증가에 따라 NH4+-N 제거 속도는 마마하게 감소하였다. 즉, Al/P=0인 NH4+-N 제거 속도는 5.0 g-NH4+-N/kg -MLSS·hr 이었고, Al/P=3.6 및 Al/P=4일 경우에는 모두 4.9 g- NH4--N/kg-MLSS·hr이었으며, 마지막으로 Al/P=5일 경우에는 4.8 g- NH4+-N/kg -MLSS·hr 를 나타내었다.
다국어 초록 (Multilingual Abstract)
After 80 days of a continuous operation of a MLE(Modified Ludzack Ettinger) process, addition of PAC as a coagulant did not affect on COD removal. When Al(III) was hydrated and precipitated and they were accumulated for a long period of time in a sing...
After 80 days of a continuous operation of a MLE(Modified Ludzack Ettinger) process, addition of PAC as a coagulant did not affect on COD removal. When Al(III) was hydrated and precipitated and they were accumulated for a long period of time in a single phase reactor, it has been reported that it might influence the microbial metabolism. However in this study Al(III) accumulation was not apparent in a series of anoxic-aerobic-clarification process. PAC coagulation did not affect the nitrogen removal as well TN removal efficiency was found to be 70%, 73 %, and 78% for Run 1, 2, and 3 respectively. At Run 4 with Al/P mole ratio of 5, 70% of TN was removed. In case of phosphorus, at Run 1 P was not removed. However when Al(III) was added as Al/P mole ratios of 3.6, 4, and 5, 92%, 96%, and 97% of P were removed respectively. When DO was 3.0~4.0 mg/L, as Al/P mole ratio increased NH4+,-N was removed insignificantly. In other word, when Al/P = 0, NH4+-N removal rate was 5.0 g-NH4+-N/kg-MLSS·hr. When AJ/P = 3.6 and AJ/P = 4, NH,+-N removal rate was 4.9 g-NH,+-N/kg-MLSS·hr for both cases. Finally when Al/P = 5, NH4+-N removal rate was 4.8 g-NH4+-N/kg-MLSS·hr.
Static Analysis of Inclined Adhesive Joint