Practical use of computational building information modeling in repairing and maintenance of hospital building- case study

다국어 초록 (Multilingual Abstract)

Computational Building Information Modeling (BIM) is an intelligent 3D model-based process that provides architecture, engineering, and construction professionals the insight to plan, design, construct, and manage buildings and infrastructure more efficiently. This paper aims at using BIM in Hospitals configurations protection. Infrastructure projects are classified as huge structural projects taking advantage of many resources such as finance, materials, human labor, facilities and time. Immense expenses in infrastructure programs should be allocated to estimating the expected results of these arrangements in domestic economy. Hence, the significance of feasibility studies is inevitable in project construction, in this way the necessity in promoting the strategies and using global contemporary technologies in the process of construction maintenance cannot be neglected. This paper aims at using the building information modeling in covering Imam Khomeini Hospital’s equipment. First, the relationship between hospital constructions maintenance and repairing, using the building information modeling, is demonstrated. Then, using library studies, the effective factors of constructions’ repairing and maintenance were collected. Finally, the possibilities of adding these factors in Revit software, as one of the most applicable software within BIM is investigated and have been identified in some items, where either this software can enter or the software for supporting the repairing and maintenance phase lacks them. The results clearly indicated that the required graphical factors in construction information modeling can be identified and applied successfully.

참고문헌 (Reference)

1 Aghaee, K, "Waste steel wires modified structural lightweight concrete" 17 (17): 958-966, 2014

2 Shariati, A, "Various types of shear connectors in composite structures: A review" 7 (7): 2876-2890, 2012

3 Foster, B, "Using real-time CMMS asset data capture during construction to improve facilities management" 1 : 6-17, 2012

4 Andalib, Z, "Using Hyper Elastic Material for Increasing Ductility of Bracing" 2010

5 Moghaddam, H, "Uniform hazard response spectra and ground motions for Tabriz" 16 (16): 238-248, 2009

6 Fanaie, N, "Theoretical assessment of wire rope bracing system with soft central cylinder" 2012

7 Fanaie, N, "Theoretical assessment of the behavior of cable bracing system with central steel cylinder" 19 (19): 463-472, 2016

8 Kheyroddin, A, "The complication and weakness of construction of steel structure" 14 : 1-9, 2008

9 Kazemi, M.T, "Study of reduced beam section connections with web opening" 2012

10 Fanaie, N, "Strengthening of moment-resisting frame using cable–cylinder bracing" 19 (19): 1736-1754, 2016

11 M. Ismail, "Strengthening of bolted shear joints in industrialized ferrocement construction" 국제구조공학회 28 (28): 681-690, 2018

12 I. Mansouri, "Strength prediction of rotary brace damper using MLR and MARS" 국제구조공학회 60 (60): 471-488, 2016

13 Shah, S, "Steel rack connections: Identification of most influential factors and a comparison of stiffness design methods" 10 (10): e0139422-, 2015

14 Shah, S, "State-of-the-art review on the design and performance of steel pallet rack connections" 66 : 240-258, 2016

15 Shariati, M, "Shear resistance of channel shear connectors in plain, reinforced and lightweight concrete" 6 (6): 977-983, 2011

16 Tahmasbi, F, "Shear capacity of C-shaped and Lshaped angle shear connectors" 11 (11): e0156989-, 2016

17 Masoud Paknahad, "Shear capacity equation for channel shear connectors in steel-concrete composite beams" 국제구조공학회 28 (28): 483-494, 2018

18 Jalali, A, "Seismic performance of structures with pre-bent strips as a damper" 7 (7): 4061-4072, 2012

19 Shen, J, "Seismic performance of concentrically braced frames with and without brace buckling" 141 : 461-481, 2017

20 Momenzadeh, S, "Seismic performance of all-steel buckling-controlled braces with various cross-sections" 139 : 44-61, 2017

21 Khorami, M, "Seismic performance evaluation of buckling restrained braced frames(BRBF)using incremental nonlinear dynamic analysis method(IDA)" 13 (13): 531-538, 2017

22 Ghassemieh, M, "Seismic evaluation of a steel moment frame with cover plate connection considering flexibility by component method" 2015

23 Bahadori, A, "Seismic evaluation of I-shaped beam to box-column connections with top and seat plates by the component method" 322 (322): 129-138, 2016

24 Momenzadeh, S, "Seismic design study of concentrically braced frames with and without buckling-controlled braces" 2017

25 Momenzadeh, S, "Seismic demand on columns in special concentrically braced frames" 168 : 93-107, 2018

26 Seyedbabak Momenzadeh, "Seismic Performance of Reduced Web Section Moment Connections" 한국강구조학회 17 (17): 413-425, 2017

27 Bazzaz, M, "Seismic Behavior of Off-centre Bracing Frame" 2011

28 Bazzaz, M, "Seismic Behavior of Off-Centre Braced Frame with Circular Element in Steel Frame Design" Semnan University 2010

29 Nader Fanaie, "Response modification factor of the frames braced with reduced yielding segment BRB" 국제구조공학회 50 (50): 1-17, 2014

30 Stanojevic, D, "Prediction of the surface roughness of wood for machining" 28 (28): 1281-1283, 2017

31 Ali Toghroli, "Prediction of shear capacity of channel shear connectors using the ANFIS model" 국제구조공학회 17 (17): 623-639, 2014

32 Toghroli, A, "Potential of soft computing approach for evaluating the factors affecting the capacity of steel–concrete composite beam" 1-9, 2016

33 Han, K.K, "Potential of big visual data and building information modeling for construction performance analytics : An exploratory study" 73 : 184-198, 2017

34 M. Safa, "Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steel-concrete composite beam's shear strength" 국제구조공학회 21 (21): 679-688, 2016

35 A. Nosrati, "Portland cement structure and its major oxides and fineness" 국제구조공학회 22 (22): 425-432, 2018

36 S.E.M. Shahabi, "Performance of shear connectors at elevated temperatures − A review" 국제구조공학회 20 (20): 185-203, 2016

37 Momenzadeh, S.B, "Performance of circular opening in beam web connections" 9 (9): 1377-1383, 2012

38 Momenzadeh, S, "Observed seismic demand on columns in SCBFs" 647-658, 2017

39 Sinaei, H, "Numerical investigation on exterior reinforced concrete Beam-Column joint strengthened by composite fiber reinforced polymer(CFRP)" 6 (6): 6572-6579, 2011

40 Andalib, Z, "Numerical evaluation of ductility and energy absorption of steel rings constructed from plates" 169 : 94-106, 2018

41 Mohammad Bazzaz, "Numerical comparison of the seismic performance of steel rings in off-centre bracing system and diagonal bracing system" 국제구조공학회 19 (19): 917-937, 2015

42 Koosha Khorramian, "Numerical analysis of tilted angle shear connectors in steel-concrete composite systems" 국제구조공학회 23 (23): 67-85, 2017

43 S.E.M. Shahabi, "Numerical analysis of channel connectors under fire and a comparison of performance with different types of shear connectors subjected to fire" 국제구조공학회 20 (20): 651-669, 2016

44 Lagüela, S, "Non-destructive approach for the generation and thermal characterization of an as-built BIM" 51 : 55-61, 2014

45 Bazzaz, M, "Modeling and Analysis of Steel Ring Devised in Off-centric Braced Frame with the Goal of Improving Ductility of Bracing Systems" Tehran, Iran, Iran Scientific and Industrial Researches Organization 2012

46 Aghaee, K, "Mechanical properties of structural lightweight concrete reinforced with waste steel wires" 66 (66): 1-9, 2014

47 Aghaee, K, "Mechanical properties of lightweight concrete partition with a core of textile waste" 1-7, 2013

48 Andalib, Z, "Investigation on the Ductility and Absorption of Energy of Steel Ring in Concentric Braces" 2011

49 Khanouki, M. M. A, "Investigation of through beam connection to concrete filled circular steel tube(CFCST)column" 121 : 144-162, 2016

50 Arabnejad Khanouki, M.M, "Investigation of seismic behaviour of composite structures with concrete filled square steel tubular (CFSST) column by push-over and time-history analyses" 2010

51 Saeed Nasrollahi, "Investigation of pipe shear connectors using push out test" 국제구조공학회 27 (27): 537-543, 2018

52 Shariati, A, "Investigation of channel shear connectors for composite concrete and steel T-beam" 7 (7): 1828-1831, 2012

53 Aghaee, K, "Investigation into the mechanical properties of structural lightweight concrete reinforced with waste steel wires" 67 (67): 197-205, 2015

54 Mohammad Mohammadhassani, "Identification of a suitable ANN architecture in predicting strain in tie section of concrete deep beams" 국제구조공학회 46 (46): 853-868, 2013

55 Safa, A, "Higher circulating levels of chemokines CXCL10, CCL20 and CCL22 in patients with ischemic heart disease" 83 : 147-157, 2016

56 Mohammad Mohammadhassani, "Fuzzy modelling approach for shear strength prediction of RC deep beams" 국제구조공학회 16 (16): 497-519, 2015

57 Aghaee, K, "Flexural properties of composite gypsum partition panel" 2015

58 Shariati, M, "Fatigue energy dissipation and failure analysis of channel shear connector embedded in the lightweight aggregate concrete in composite bridge girders" 2012

59 Shariati, M, "Fatigue energy dissipation and failure analysis of angle shear connectors embedded in high strength concrete" 41 : 124-134, 2014

60 Andalib, Z, "Experimental investigation of the ductility and performance of steel rings constructed from plates" 103 : 77-88, 2014

61 Shariati, M, "Experimental assessment of channel shear connectors under monotonic and fully reversed cyclic loading in high strength concrete" 34 : 325-331, 2012

62 Shariati, A, "Experimental assessment of angle shear connectors under monotonic and fully reversed cyclic loading in high strength concrete" 52 : 276-283, 2014

63 Shariati, M, "Experimental and numerical investigations of channel shear connectors in high strength concrete" 2011

64 Shariati, M, "Experimental and analytical study on channel shear connectors in light weight aggregate concrete" 2010

65 Andalib, Z, "Experimental and Numerical Investigation on the Ductility of Steel Ring Constructed from Steel Plates in Concentric Braces" Semnan University 2011

66 Majid Khorami, "Evaluation of the seismic performance of special moment frames using incremental nonlinear dynamic analysis" 국제구조공학회 63 (63): 259-268, 2017

67 Mohammad Bazzaz, "Evaluation of the seismic performance of off-centre bracing system with ductile element in steel frames" 국제구조공학회 12 (12): 445-464, 2012

68 Ali Toghroli, "Evaluation of the parameters affecting the Schmidt rebound hammer reading using ANFIS method" 사단법인 한국계산역학회 21 (21): 525-530, 2018

69 Sinaei, H, "Evaluation of reinforced concrete beam behaviour using finite element analysis by ABAQUS" 7 (7): 2002-2009, 2012

70 Bazzaz, M, "Evaluating the performance of steel ring in special bracing frame" 2011

71 Bazzaz, M, "Evaluating the performance of OBS-CO in steel frames under monotonic load" 8 (8): 697-710, 2015

72 Mohammad Bazzaz, "Evaluating the Seismic Performance of Off-centre Bracing System with Circular element in Optimum Place" 한국강구조학회 14 (14): 293-304, 2014

73 Costa, S.D, "Energy indicators based on multi-source data and participation" 166 (166): 24-33, 2013

74 Kariuki, B, "Effect of Financing Infrastructure Projects Using Public Private Partnership on Physical Infrastructure Development in Kenya" University of Nairobi 2014

75 Ali Ziaei-Nia, "Dynamic mix design optimization of high-performance concrete" 국제구조공학회 29 (29): 67-75, 2018

76 Mohammad Mohammadhassani, "Ductility and strength assessment of HSC beams with varying of tensile reinforcement ratios" 국제구조공학회 48 (48): 833-848, 2013

77 Xing Wei, "Distribution of shear force in perforated shear connectors" 국제구조공학회 27 (27): 389-399, 2018

78 Peng, S, "Design of an IoT-BIM-GIS Based Risk Management System for Hospital Basic Operation. ServiceOriented System Engineering (SOSE)" 2017

79 O'Connor, A.C, "Cost Analysis of Inadequate Interoperability in the US Capital Facilities Industry" 2004

80 Aghaee, K, "Construction of lightweight concrete partitions using textile waste" 793-800, 2013

81 Yousef Zandi, "Computational investigation of the comparative analysis of cylindrical barns subjected to earthquake" 국제구조공학회 28 (28): 439-447, 2018

82 Mehran Shariat, "Computational Lagrangian Multiplier Method by using for optimization and sensitivity analysis of rectangular reinforced concrete beams" 국제구조공학회 29 (29): 243-256, 2018

83 Shariati, M, "Comparison of behaviour between channel and angle shear connectors under monotonic and fully reversed cyclic loading" 38 : 582-593, 2013

84 Shariati, M, "Comparative performance of channel and angle shear connectors in high strength concrete composites:An experimental study" 120 : 382-392, 2016

85 Akponeware, A.O, "Clash detection or clash avoidance? An investigation into coordination problems in 3D BIM" 7 (7): 75-, 2017

86 Simões, D.G, "Building maintenance supported by BIM model" Technical University of Lisbon 2013

87 Porwal, A, "Building Information Modeling(BIM)partnering framework for public construction projects" 31 : 204-214, 2013

88 Ding, L, "Building Information Modeling(BIM)application framework : The process of expanding from 3D to computable nD" 46 : 82-93, 2014

89 Azhar, S, "Building Information Modeling (BIM): A new paradigm for visual interactive modeling and simulation for construction projects" 2008

90 Abbas Heydari, "Buckling analysis of tapered BDFGM nano-beam under variable axial compression resting on elastic medium" 국제구조공학회 66 (66): 737-748, 2018

91 Shariati, M, "Behaviour of C-shaped angle shear connectors under monotonic and fully reversed cyclic loading : An experimental study" 41 : 67-73, 2012

92 Shariati, A, "Behaviour of C-shaped Angle Shear Connectors in High Strength Concrete" Universiti Malaya 2014

93 Khorramian, K, "Behavior of tilted angle shear connectors" 10 (10): 1-11, 2015

94 Arabnejad Khanouki, M.M, "Behavior of through beam connections composed of CFSST columns and steel beams by finite element studying" 168 : 2329-2333, 2011

95 Shah, S, "Behavior of steel pallet rack beam-tocolumn connections at elevated temperatures" 106 : 471-483, 2016

96 Shah, S.N.R, "Behavior of industrial steel rack connections" 70-71 : 725-740, 2016

97 Shariati, M, "Behavior of channel shear connectors in normal and light weight aggregate concrete (Experimental and analytical study)" 168 : 2303-2307, 2011

98 Shariati, M, "Behavior of V-shaped angle shear connectors: experimental and parametric study" 1-18, 2015

99 Eastman, C.M, "BIM handbook: A guide to building information modeling for owners, managers, designers, engineers and contractors" John Wiley & Sons 2011

100 Bortolini, R, "BIM for the integration of Building Maintenance Management: A case study of a university campus" 2017

101 Sheth, A.Z, "BIM and refurbishment of exisiting healthcare facilities" 2010

102 Hamidian, M, "Assessment of high strength and light weight aggregate concrete properties using ultrasonic pulse velocity technique" 6 (6): 5261-5266, 2011

103 Shariati, M, "Assessment Building Using None-destructive Test Techniques (ultra Sonic Pulse Velocity and Schmidt Rebound Hammer)" Universiti Putra Malaysia 2008

104 Shariati, M, "Assessing the strength of reinforced concrete structures through Ultrasonic Pulse Velocity and Schmidt Rebound Hammer tests" 6 (6): 213-220, 2011

105 Toghroli, A, "Applications of the ANFIS and LR Models in the Prediction of Shear Connection in Composite Beams" Universiti Malaya 2015

106 Hamidian, M, "Application of Schmidt rebound hammer and ultrasonic pulse velocity techniques for structural health monitoring" 7 (7): 1997-2001, 2012

107 Yadollah Sedghi, "Application of ANFIS technique on performance of C and L shaped angle shear connectors" 국제구조공학회 22 (22): 335-340, 2018

108 Nader Fanaie, "Analytical study of composite beams with different arrangements of channel shear connectors" 국제구조공학회 19 (19): 485-501, 2015

109 Mansouri, I, "Analysis of influential factors for predicting the shear strength of a V-shaped angle shear connector in composite beams using an adaptive neuro-fuzzy technique" 1-11, 2017

110 Mohammadhassani, M, "An experimental study on the failure modes of high strength concrete beams with particular references to variation of the tensile reinforcement ratio" 41 : 73-80, 2014

111 Mohammad Mohammadhassani, "An evolutionary fuzzy modelling approach and comparison of different methods for shear strength prediction of high-strength concrete beams without stirrups" 국제구조공학회 14 (14): 785-809, 2014

112 Aghakhani, M, "A simple modification of homotopy perturbation method for the solution of blasius equation in semiinfinite domains" 7 : 2015

113 Ali Toghroli, "A review on pavement porous concrete using recycled waste materials" 국제구조공학회 22 (22): 433-440, 2018

114 Aaltonen, K, "A project lifecycle perspective on stakeholder influence strategies in global projects" 26 (26): 381-397, 2010

115 Daie, M, "A new finite element investigation on prebent st eel strips as damper for vibration control" 6 (6): 8044-8050, 2011

116 Sun, C, "A literature review of the factors limiting the application of BIM in the construction industry" 23 (23): 764-779, 2017

117 Bala, K, "A computer-based cost prediction model for institutional building projects in Nigeria : an artificial neural network approach" 12 (12): 519-530, 2014

118 Bugg, R.A, "A Case Study in the Use of Building Information Technology in Hospital Construction" 2017

119 Rundell, R, "1-2-3 Revit: BIM and FM, How can BIM benefit facilities management" AIA Cadalyst 2006