본 연구는 lab-scale로 제작된 가압식 마이크로버블 발생장치의 버블크기 분포를 분석하여 장치의 최적 운전조건을 검토하고 벤튜리 노즐 제원에 따른 마이크로버블 발생 특성을 확인하였다. ...
http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
https://www.riss.kr/link?id=A103307400
2015
Korean
KCI등재
학술저널
6397-6402(6쪽)
5
0
상세조회0
다운로드국문 초록 (Abstract)
본 연구는 lab-scale로 제작된 가압식 마이크로버블 발생장치의 버블크기 분포를 분석하여 장치의 최적 운전조건을 검토하고 벤튜리 노즐 제원에 따른 마이크로버블 발생 특성을 확인하였다. ...
본 연구는 lab-scale로 제작된 가압식 마이크로버블 발생장치의 버블크기 분포를 분석하여 장치의 최적 운전조건을 검토하고 벤튜리 노즐 제원에 따른 마이크로버블 발생 특성을 확인하였다. 실험결과, 실험실 규모의 가압식 마이크로버블 발생장치의 운전조건은 공기 주입율 0.3 LPM, 가압탱크압력 3 bar, 벤튜리 노즐을 수조와 직접 연결 하였을 때, 상대적으로 우수한 성능을 나타내었다. 벤튜리 노즐 제원을 달리한 마이크로버블 발생 특성에서는 노즐의 제원에 따른 버블크기 분포에 미치는 영향은 낮지만, 버블 발생의 성능적 측면에서는 노즐의 목 직경이 3-4 mm 일 때, D50이 54.98– 61.19 ㎛(D3L15, D4L15), 50 ㎛이하의 버블 분율은 각각 0.326, 0.345(D3L15, D4L15)로 상대적으로 우수함을 확인하였으며, 노즐 목 길이의 경우 목 길이가 20 mm인 노즐의 D50이 49.40–54.98㎛, 50 ㎛이하의 버블 분율은 0.447로서, 마이크로버블을 비교적 안정적 으로 발생시키는 것을 확인 할 수 있었다.
다국어 초록 (Multilingual Abstract)
This research was performed to review operating parameters, optimum condition and check characteristic of microbubble generation for using bubble size distribution according to venturi specification. Optimum operating condition have airflow rate 0.3 L...
This research was performed to review operating parameters, optimum condition and check characteristic of microbubble generation for using bubble size distribution according to venturi specification. Optimum operating condition have airflow rate 0.3 LPM, 3 bar(pressure tank) and connecting nozzle directly(without valve), it is advantageous to generate microbubble. In case of characteristic of microbubble generation according to venturi specification, effect that nozzle specification affects bubble size distribution is low impact. But considering performance aspects, when using nozzle that throat diameter 3-4 mm, D50 are 54.98– 61.19 ㎛(D3L15, D4L15), fraction of bubble less than 50 ㎛ are 0.326, 0.345. And it is superior to others. Besides, D50 and fraction of bubble less than 50 ㎛ of throat length 20 mm are 49.40–54.98 ㎛, 0.447, respectively And nozzle that throat length 20 mm is relatively tendency to generate microbubble stably.
참고문헌 (Reference)
1 박현진, "해수담수화 전처리로서 DAF공정에서 고온의 해수에 대한 영향 특성" 대한상하수도학회 26 (26): 807-813, 2012
2 American Water Works Association, "Water Quality and Treatment" McGraw-Hill Professional 1999
3 R. Parmar, "Microbubble generation and microbubble-aided transport process intensification-A state-of-the-art report" 64 : 79-97, 2013
4 S. Liu, "Effect of micro-bubbles on coagulation flotation precess of dyeing wasterwater" 71 : 337-346, 2010
5 A. M Al Taweel, "Effect of electrolytes on interphase mass transfer in microbubble-sparged airlift reactors" 100 : 474-485, 2013
6 한무영, "DAF 에서 압력에 따른 미세기포의 크기특성" 대한상하수도학회 16 (16): 177-182, 2002
7 박상철, "DAF 공정에서 공기포화장치와 노즐 특성 별 미세기포 발생에 미치는 영향" 대한환경공학회 35 (35): 929-936, 2013
8 M. RB, "Characterization of micro-bubble size distribution and flow configuration in DAF contact zone by a non-intrusive image analysis system and tracer tests" 61 (61): 253-262, 2010
1 박현진, "해수담수화 전처리로서 DAF공정에서 고온의 해수에 대한 영향 특성" 대한상하수도학회 26 (26): 807-813, 2012
2 American Water Works Association, "Water Quality and Treatment" McGraw-Hill Professional 1999
3 R. Parmar, "Microbubble generation and microbubble-aided transport process intensification-A state-of-the-art report" 64 : 79-97, 2013
4 S. Liu, "Effect of micro-bubbles on coagulation flotation precess of dyeing wasterwater" 71 : 337-346, 2010
5 A. M Al Taweel, "Effect of electrolytes on interphase mass transfer in microbubble-sparged airlift reactors" 100 : 474-485, 2013
6 한무영, "DAF 에서 압력에 따른 미세기포의 크기특성" 대한상하수도학회 16 (16): 177-182, 2002
7 박상철, "DAF 공정에서 공기포화장치와 노즐 특성 별 미세기포 발생에 미치는 영향" 대한환경공학회 35 (35): 929-936, 2013
8 M. RB, "Characterization of micro-bubble size distribution and flow configuration in DAF contact zone by a non-intrusive image analysis system and tracer tests" 61 (61): 253-262, 2010
Fe계 벌크 비정질 합금을 이용한 레이저 용접층의 파손 거동
LED 칩 제조용 사파이어 웨이퍼 절단을 위한 내부 레이저 스크라이빙 가공 특성 분석
학술지 이력
연월일 | 이력구분 | 이력상세 | 등재구분 |
---|---|---|---|
2026 | 평가예정 | 재인증평가 신청대상 (재인증) | |
2020-01-01 | 평가 | 등재학술지 유지 (재인증) | |
2017-07-01 | 평가 | 등재후보로 하락(현장점검) (기타) | |
2017-07-01 | 평가 | 등재학술지 선정 (계속평가) | |
2015-01-01 | 평가 | 등재학술지 유지 (등재유지) | |
2011-01-01 | 평가 | 등재학술지 유지 (등재유지) | |
2008-01-01 | 평가 | 등재학술지 선정 (등재후보2차) | |
2007-08-28 | 학술지등록 | 한글명 : 한국산학기술학회논문지외국어명 : Journal of Korea Academia-Industrial cooperation Society | |
2007-07-06 | 학회명변경 | 영문명 : The Korean Academic Inderstrial Society -> The Korea Academia-Industrial cooperation Society | |
2007-01-01 | 평가 | 등재후보 1차 PASS (등재후보1차) | |
2005-01-01 | 평가 | 등재후보학술지 선정 (신규평가) |
학술지 인용정보
기준연도 | WOS-KCI 통합IF(2년) | KCIF(2년) | KCIF(3년) |
---|---|---|---|
2016 | 0.68 | 0.68 | 0.68 |
KCIF(4년) | KCIF(5년) | 중심성지수(3년) | 즉시성지수 |
0.66 | 0.61 | 0.842 | 0.23 |