Dynamic mix design optimization of high-performance concrete

다국어 초록 (Multilingual Abstract)

High performance concrete (HPC) depends on various parameters such as the type of cement, aggregate and water reducer amount. Generally, the ready concrete company in various regions according to the requirements and costs, mix design of concrete as well as type of cement, aggregates, and, amount of other components will vary as a result of moment decisions or dynamic optimization, though the ideal conditions will be more applicable for the design of mix proportion of concrete. This study aimed to apply dynamic optimization for mix design of HPC; consequently, the objective function, decision variables, input and output variables and constraints are defined and also the proposed dynamic optimization model is validated by experimental results. Results indicate that dynamic optimization objective function can be defined in such a way that the compressive strength or performance of all constraints is simultaneously examined, so changing any of the variables at each step of the process input and output data changes the dynamic of the process which makes concrete mix design formidable.

참고문헌 (Reference)

1 Nagrockienė, D, "The effect of plasticizing admixture on the physical and mechanical properties of concrete with limestone cement" 19 (19): 337-342, 2013

2 Bassuoni, M.T, "The case for airentrainment in high-performance concrete" 158 (158): 311-319, 2005

3 Lambert, D.K, "Stochastic dynamic optimization and rangeland investment decisions" 18 : 6-195, 1990

4 Holm, T.A, "State-of-the-art report on high-strength, high-durability structural low-density concrete for applications in severe marine environments" US Army Corps of Engineers, Engineer Research and Development Center 2000

5 Hirschi, T, "Sika Concrete Handbook, Sika Services AG, Zurique" 2005

6 Masoud Paknahad, "Shear capacity equation for channel shear connectors in steel-concrete composite beams" 국제구조공학회 28 (28): 483-494, 2018

7 Nobakht, M, "Selection of Structural Overlays Using Asphalt Mixture Performance" 29 (29): 04017209-, 2017

8 Khorami, M, "Seismic performance evaluation of buckling restrained braced frames(BRBF)using incremental nonlinear dynamic analysis method(IDA)" 13 (13): 531-538, 2017

9 Nader Fanaie, "Response modification factor of the frames braced with reduced yielding segment BRB" 국제구조공학회 50 (50): 1-17, 2014

10 Folliard, K.J, "Properties of highperformance concrete containing shrinkage-reducing admixture" 27 (27): 1357-1364, 1997

11 Konkov, V, "Principle Approaches to High Performance Concrete Application in Construction" 57 : 589-596, 2013

12 Wang, C, "Preparation of ultra-high performance concrete with common technology and materials" 34 (34): 538-544, 2012

13 Ali Toghroli, "Prediction of shear capacity of channel shear connectors using the ANFIS model" 국제구조공학회 17 (17): 623-639, 2014

14 Prasad, B.R, "Prediction of compressive strength of SCC and HPC with high volume fly ash using ANN" 23 (23): 117-128, 2009

15 Nagrockienė, D, "Predicting frost resistance of concrete with different coarse aggregate concentration by porosity parameters" 17 (17): 203-207, 2011

16 Toghroli, A, "Potential of soft computing approach for evaluating the factors affecting the capacity of steel–concrete composite beam" 1-9, 2016

17 M. Safa, "Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steel-concrete composite beam's shear strength" 국제구조공학회 21 (21): 679-688, 2016

18 Brandt, A.M, "Optimization Methods for Material Design of Cement-based Composites" CRC Press 1998

19 Koosha Khorramian, "Numerical analysis of tilted angle shear connectors in steel-concrete composite systems" 국제구조공학회 23 (23): 67-85, 2017

20 Aghaee, K, "Mechanical properties of lightweight concrete partition with a core of textile waste" 2013 : 1-7, 2013

21 Zia, P, "Mechanical Behavior of High Performance Concretes" National Academy of Sciences 1993

22 Lekūnaitė, L, "Investigations of Forming Mixture Parameters of Autoclaved Aerated Concrete with Nanoadditives" 18 (18): 284-289, 2012

23 Saeed Nasrollahi, "Investigation of pipe shear connectors using push out test" 국제구조공학회 27 (27): 537-543, 2018

24 Farhad Ahadi Koloo, "Investigation of Proposed Concrete Filled Steel Tube Connections under Reversed Cyclic Loading" 한국강구조학회 18 (18): 163-177, 2018

25 Capón-García, E, "Integrating process dynamics within batch process scheduling via mixed-integer dynamic optimization" 102 : 139-150, 2013

26 Park, J.J, "Influence of the ingredients on the compressive strength of UHPC as a fundamental study to optimize the mixing proportion" 2008

27 Mohammad Mohammadhassani, "Identification of a suitable ANN architecture in predicting strain in tie section of concrete deep beams" 국제구조공학회 46 (46): 853-868, 2013

28 Goodspeed, C.H, "Highperformance concrete defined for highway structures" 18 (18): 62-67, 1996

29 Parhizkar, T, "High-performance Concrete New Generation" 2009

30 Aïtcin, P.-C, "High Performance Concrete" CRC Press 2011

31 Institute, A.C, "Guide for Selecting Proportions for High-Strength Concrete with Portland Cement and Fly Ash" ACI Committee 1998

32 Shariati, M, "Fatigue energy dissipation and failure analysis of angle shear connectors embedded in high strength concrete" 41 : 124-134, 2014

33 Shariati, M, "Experimental assessment of channel shear connectors under monotonic and fully reversed cyclic loading in high strength concrete" 34 : 325-331, 2012

34 Shariati, A, "Experimental assessment of angle shear connectors under monotonic and fully reversed cyclic loading in high strength concrete" 52 : 276-283, 2014

35 Shariati, M, "Experimental and numerical investigations of channel shear connectors in high strength concrete" 2011

36 Majid Khorami, "Evaluation of the seismic performance of special moment frames using incremental nonlinear dynamic analysis" 국제구조공학회 63 (63): 259-268, 2017

37 Ali Toghroli, "Evaluation of the parameters affecting the Schmidt rebound hammer reading using ANFIS method" 사단법인 한국계산역학회 21 (21): 525-530, 2018

38 Abedini, M, "Evaluation of Concrete Structures Reinforced with Fiber Reinforced Polymers Bars : A Review" 7 (7): 165-175, 2017

39 Hájek, P, "Environmentally optimized floor slab using UHPC–contribution to sustainable building" 2008

40 Rao, S.S, "Engineering Optimization: Theory and Practice" John Wiley & Sons 2009

41 Sherbaf, M.R, "Effects of water-cement and cement content on properties of HPC" 2012

42 Eskandari-Naddaf, H, "Effect of Micro Silica and Air Entraining Admixture on Corrosion of Reinforced Concrete" 2014

43 Ziaei-Nia, A, "Effect of Air Entraining Admixture on Concrete under Temperature Changes in Freeze and Thaw Cycles" 5 (5): 6208-6216, 2018

44 Bonvin, D, "Dynamic optimization in the batch chemical industry" 2001

45 Ulanicki, B, "Dynamic optimization approach for solving an optimal scheduling problem in water distribution systems" 133 (133): 23-32, 2007

46 Hsiao, C.-T, "Dynamic optimal groundwater management with inclusion of fixed costs" 128 (128): 57-65, 2002

47 Sechi, G.M, "Dynamic attribution of water quality indexes in a multi-reservoir optimization model" 237 (237): 99-107, 2009

48 Xing Wei, "Distribution of shear force in perforated shear connectors" 국제구조공학회 27 (27): 389-399, 2018

49 Emad Hosseinpour, "Direct shear behavior of concrete filled hollow steel tube shear connector for slim-floor steel beams" 국제구조공학회 26 (26): 485-499, 2018

50 Bouteiller, V, "Corrosion initiation of reinforced concretes based on Portland or GGBS cements : Chloride contents and electrochemical characterizations versus time" 42 (42): 1456-1467, 2012

51 Mehta, P.K, "Concrete: Microstructure, Properties and Materials" McGraw-Hill 2006

52 Grigonis, D, "Concrete Dust Influence on Cement Stone Properties" 17 (17): 197-202, 2011

53 Yousef Zandi, "Computational investigation of the comparative analysis of cylindrical barns subjected to earthquake" 국제구조공학회 28 (28): 439-447, 2018

54 Shariati, M, "Comparative performance of channel and angle shear connectors in high strength concrete composites : An experimental study" 120 : 382-392, 2016

55 "C33, A. Standard Specification for Concrete Aggregates"

56 Shariati, M, "Assessment Building Using None-destructive Test Techniques(ultra Sonic Pulse Velocity and Schmidt Rebound Hammer)" 2008

57 Akgul, M, "Analyzing dynamic curve widening on forest roads" 28 (28): 411-417, 2017

58 Mansouri, I, "Analysis of influential factors for predicting the shear strength of a V-shaped angle shear connector in composite beams using an adaptive neuro-fuzzy technique" 1-11, 2017

59 Lu, H.W, "An inexact dynamic optimization model for municipal solid waste management in association with greenhouse gas emission control" 90 (90): 396-409, 2009

60 Mohammad Mohammadhassani, "An evolutionary fuzzy modelling approach and comparison of different methods for shear strength prediction of high-strength concrete beams without stirrups" 국제구조공학회 14 (14): 785-809, 2014

61 Feng, J, "An efficient dynamic optimization method for sequential identification of grouptestable items" 43 (43): 69-83, 2010

62 Eskandari-Naddaf, H, "ANN prediction of cement mortar compressive strength, influence of cement strength class" 138 : 1-11, 2017

63 Bazzaz, M, "A straightforward procedure to characterize nonlinear viscoelastic response of asphalt concrete at high temperatures" 2018

64 Anghinolfi, D, "A dynamic optimization model for solid waste recycling" 33 (33): 287-296, 2013