Enhanced strength and ductility in particulate-reinforced aluminum matrix composites fabricated by flake powder metallurgy

다국어 초록 (Multilingual Abstract)

Reinforcement agglomeration always leads to severe stress concentration and porosity, which is detrimental to the deformation ability and mechanical properties of particulate-reinforced metal matrix composites. In this study, uniform distribution of 32vol%B<SUB>4</SUB>C has been achieved in B<SUB>4</SUB>C/Al composite by means of flake powder metallurgy (Flake PM), in which flake Al powder is used as the starting material. The flake Al powder exhibits higher apparent volume than spherical powders of the same mass, and thus can provide more space to accommodate the B<SUB>4</SUB>C particles. Therefore, compared with conventional PM, Flake PM can lead to more uniform distribution of B<SUB>4</SUB>C particles in the composite powder as well as in the consolidated composite. Meanwhile, the flake Al powder has a nano skin of Al<SUB>2</SUB>O<SUB>3</SUB>, which could be fractured and dispersed inside the fine matrix grains during consolidation, and were found to induce a higher normalized strain hardening rate for the composite during deformation. As a result, the Flake PM 32vol%B<SUB>4</SUB>C/Al composite exhibits an ultimate tensile strength of 305MPa and a uniform elongation of 6.6%, 63% stronger and 13% more ductile than its counterpart fabricated by conventional PM.