저 Pb Sn-5%Pb-1.5%Ag-x%In계 솔도 합금의 특성에 관한 연구 = A Study on the Characteristics of Low Pb Sn-5%Pb-1.5%Pb-1.5Ag-x%In Solder Alloys

국문 초록 (Abstract)

Pb의 환경오염 문제를 발생하지 않는 저농도 Pb 솔도합금을 개발하기 위하여, 새로운 Sn-5%Pb-1.5%Ag-x%In계 합금 조성을 설계하고, 이 합금의 융점, 젖음성, 상분석, 경도, 인장강도, 드로스성을 평가하여, Sn-37%Pb 솔더오 대체 가능성을 타진하였다. Sn-37%Pb 솔도 합금의 Pbdldhs 용출농도는 국제규제치인 3ppm보다 훨씬 적은 0.46ppm이었고, 환경문제를 유발하지 않는 것으로 확인되었다. 이 합금계의 융점은 $183-192^{\circ}C$이고, 응고온도범위도 $5^{\circ}C$내외로 매우 좁았다. 젖음성은 In의 첨가양에 따라 큰 차이가 거의 없었으며, Sn-375Pb와 비슷하였다. 융점 및 젖음성 측면에서 Sn-37%Pb와 대체 가능한 것으로 판단되었다. 경도는 Sn-37%Pb의 약 1.5배이고, 인장강도는 Sn-37%Pb의 것보다 높고, In의 첨가량에 따라 증가하였지만, 연신율은 감소하였다. In이 1% 첨가된 합금에서는 수지 상정 경계에 Ag3Sn과 Pb가 정출되고, 3% 이상에서는 $Ag_3Sn$과 $Ag_3In$ 및 Pb가 정출되었다. 드로스 생성속도는 Sn-37%Pb 합금이 Sn-5%Pb-1.5%Ag 합금보다 빠르고, In을 첨가할수록 느리고 2%의 In을 첨가한 합금은 180분에서도 거의 드로스가 발생하지 않았다.

다국어 초록 (Multilingual Abstract)

This work designed Sn-5%Pb-1.5%Ag-x%In solder alloy to develop the solder alloy with low Pb content. This solder alloy doesn't cause environmental pollution. and this study reviewed the probability of replacement of Sn-37%Pb solder as evaluation of melting range, wettability. microstructure, microhardne'ss, tensile strength, drossability of this new solder alloys. The level of international regulation in dissolution amount of Pb ion was 3ppm. But dissolution amount of Pb ion in Sn-5%Pb solder alloy confirmed not to threat the global environmental is 0.46ppm. The melting range of this solder alloy was $183-192^{\circ}C$. Also the range of solidification was very narrow within $5^{\circ}C$. The wettability was similar to Sn-37%Pb solder, and the effect of amount of In addition of wettability couldn't be founded. The probability of replacement in the melting range and wettability is very high. And microhardness of this solder alloy was 1.5 times of conventional type solder. Tensile strength of new solder alloys was a little high than that of conventional type solder. With increasing amount of In% addition, tensile strength was increased, but elongation was decreased. The solder alloy of l%In addition revealed AgSn and Pb on dendrite microstructure boundary, and $Ag_3Sn$, $Ag_3In$ and Pb were revealed on it at the solder alloy of 3% In addition. The drossability was superior to Sn-37%Pb solder alloy and the solder alloys of 2% In addition was not generated for 3hrs.