Effects of Zn Addition on Dynamic Recrystallization of High Strain Rate Rolled Al–Mg Sheets

다국어 초록 (Multilingual Abstract)

Effects of Zn addition (0, 0.5, 1.0 and 1.5 wt%) on dynamic recrystallization (DRX) behavior of Al-9.2Mg alloy during highstrain rate rolling (with rolling temperature of 400 °C and strain rate of 8.6 s−1) are carefully investigated. The Zn contentplays a significant role in the enhanced DRX of Al-9.2Mg alloy. The critical strain (εc) and the peak strain (εp) are reducedfrom 0.178 ± 0.002 to 0.102 ± 0.001 and 0.211 ± 0.003 to 0.139 ± 0.002 with the Zn content increasing from 0 to 1.5%,respectively. Almost complete DRX grains are obtained in the Al-9.2Mg-0.5Zn alloy. The DRX volume fraction (FDRX), theaverage DRX grain size (AGS), the volume fraction of high-angle grain boundaries (FHAGBs) and the average grain boundaryangle (θAV) are 91.5%, 5.6 μm, 91.1% and 37.6 º, respectively. The Zn addition can enhance the formation of deformationbands (DBs) and promote the DRX process by providing the nucleation sites for new grains, while the increased dynamicprecipitates inhibit DRX. Continuous dynamic recrystallization (CDRX) is the dominant DRX mechanism, while discontinuousdynamic recrystallization (DDRX) is also existent. Effects of Zn addition on DRX process of the Al–Mg alloys canbe ascribed to the more DBs, the reduced stacking fault energy (SFE) and the dynamic precipitates.

참고문헌 (Reference)

1 T. Morishige, 64 : 355-, 2011

2 R. Goswami, 45 : 2894-, 2014

3 M. Jobba, 65 : 43-, 2015

4 S. Q. Zhu, 63 : 985-, 2010

5 M. P. Liu, 48 : 4681-, 2013

6 R. Goswami, 527 : 1089-, 2010

7 D. S. D’Antuono, 123 : 264-, 2017

8 R. K. Koju, 68 : 1596-, 2016

9 R. Sandström, 9 : 59-, 1975

10 K. Huang, 111 : 548-, 2016

11 S. B. Jin, 628 : 160-, 2015

12 I. Mazurina, 473 : 297-, 2008

13 C. H. Fan, 27 : 289-, 2017

14 M. A. Mostafaei, 535 : 216-, 2012

15 A. V. Mikhaylovskaya, 139 : 30-, 2018

16 Y. J. Lin, 573 : 197-, 2013

17 I. A. Ovid’ko, 49 : 6682-, 2014

18 X. Y. Liu, 46 : 3467-, 1998

19 X. Sauvage, 72 : 125-, 2014

20 H. A. Razazi, 155 : 619-, 2018

21 C. Guo, 147 : 84-, 2019

22 A. G. Mochugovskii, 59 : 1-, 2017

23 C. Y. Meng, 617 : 925-, 2014

24 C. Y. Meng, 655 : 178-, 2016

25 M. C. Carroll, 42 : 335-, 2000

26 J. Yun, 744 : 21-, 2019

27 Y. Qi, 75 : 1-, 2007

28 H. Zhu, 40 : 598-, 2009

29 X. Y. Li, 753 : 59-, 2019

30 J. K. Zou, 735 : 49-, 2018

31 A. Sarkar, 2 : 130-, 2013

32 R. Kaibyshev, 467 : 1199-, 2004

33 S. Gourdet, 283 : 274-, 2000

34 Y. Z. Wu, 556 : 164-, 2012

35 C. Y. Meng, 37 : 129-, 2018

36 C. S. Lee, 41 : 2265-, 1993

37 Y. Lin, 573 : 197-, 2013

38 Y. V. Prasad, 14 : 1241-, 1991

39 D. Zhao, 690 : 841-, 2017

40 J. D. Robson, 57 : 2739-, 2009

41 L. Jiang, 488 : 261-, 2005

42 J. S. Vetrano, 238 : 101-, 1997

43 O. Hundert, 37 : 129-, 1989

44 Lingling Ren ; Huimin Gu ; Wei Wang ; Shuai Wang ; Chengde Li ; Zhenbiao Wang ; Yuchun Zhai ; Peihua Ma, "Effect of Sc Content on the Microstructure and Properties of Al–Mg–Sc Alloys Deposited by Wire Arc Additive Manufacturing" 대한금속·재료학회 27 (27): 68-77, 2021

45 Zhenzhen Li ; Hongge Yan ; Jihua Chen ; Weijun Xia ; Bin Su ; Lu Zhao ; Min Song, "Effect of Mg Content on the Damping Behavior of Al–Mg Alloys" 대한금속·재료학회 27 (27): 3155-3163, 2021

46 O. Sitdikov ; E. Avtokratova ; M. Markushev, "Development of Ultrafine Grain Structure in an Al–Mg–Mn–Sc–Zr Alloy During High-Temperature Multidirectional Isothermal Forging" 대한금속·재료학회 27 (27): 2743-2755, 2021

47 Xinyu Li ; Weijun Xia ; Jihua Chen ; Hongge Yan ; Zhenzhen Li ; Bin Su ; Min Song, "Bimodal-Structured Al–Mg Alloy with High Strength and Ductility Processed by High Strain Rate Rolling at Medium Temperature" 대한금속·재료학회 27 (27): 5191-5198, 2021