전동볼밀을 이용한 금속기반 복합재 제조공정에서 분쇄매체차이에 대한 입자형상변화와 DEM 시뮬레이션 해석 = Particle Morphology Change and Different Experimental Condition Analysis during Composites Fabrication Process by Conventional Ball Mill with Discrete Element Method(DEM) Simulation

다국어 초록 (Multilingual Abstract)

Particle morphology change and different experimental condition analysis during composite fabrication process by traditional ball milling with discrete element method (DEM) simulation were investigated. A simulation of the three dimensional motion of balls in a traditional ball mill for research on the grinding mechanism was carried out by DEM simulation. We studied the motion of the balls, the ball behavior energy and velocity; the forces acting on the balls were calculated using traditional ball milling as simulated by DEM. The effect of the operational variables such as the rotational speed, ball material and size on the flow velocity, collision force and total impact energy were analyzed. The results showed that increased rotation speed with interaction impact energy between balls and balls, balls and pots and walls and balls. The rotation speed increases with an increase of the impact energy. Experiments were conducted to quantify the grinding performance under the same conditions. Furthermore, the results showed that ball motion affects the particle morphology, which changed from irregular type to plate type with increasing rotation speed. The evolution was also found to depend on the impact energy increase of the grinding media. These findings are useful to understand and optimize the particle motion and grinding behavior of traditional ball mills.

참고문헌 (Reference)

1 S. Sakuragi, 11 (11): 2015

2 H. Choi, 8 : 1147-, 2011

3 D. W. Fuerstenau, 13 : 5-, 1995

4 H. Choi, 20 : 350-, 2009

5 M. Andreas, 19 : 17-, 2002

6 S. S. Kim, 5 : 154-, 2008

7 H. Mori, 143 : 230-, 2004

8 H. Ryu, 7 : 339-, 1997

9 C. H. Shim, 10 : 8-, 1995

10 H. Choi, 8 : 1147-, 2011

11 Wang, H. Choi, 47 : 3427-, 2009

12 H. Choi, 74 : 91-, 2013

13 J. Zheng, 86 : 171-, 1996

14 Y. H. Park, 34 : 896-, 1996

15 최희규, "초고속 유성형 매체 분쇄기를 이용한 건식분쇄공정에서 Al/CNTs 복합재 제조를 위한 알루미늄분말의 분쇄거동" 한국재료학회 23 (23): 89-97, 2013

16 최희규, "입자경과 분쇄소비동력의 고찰에 의한 교반볼밀 분쇄특성의 정량적 연구" 한국재료학회 17 (17): 532-537, 2007

17 최희규, "매체교반형 미분쇄기에 의한 무기분말의 초미분쇄 기구에 관한 연구" 한국화학공학회 40 (40): 498-506, 2002

18 보르암갈란, "다양한 매체형 분쇄기를 이용한 건식 분쇄공정에서 장비의 표준화를 위한 분쇄실험의 비교 연구" 한국재료학회 25 (25): 305-316, 2015

19 최희규, "교반 볼밀에 의한 방해석, 납석, 활석의 분쇄 시 분쇄속도론에 관한 연구 - 선택함수의 고찰" 한국광물학회 20 (20): 135-145, 2007

20 H. Masuda, "Powder Technology Handbook" Taylor & Francis 213-, 2006

21 B. Bhushan, "Mordern Tribology Handbook, vol.1 Principles of Tribology" CRC Press 2000

22 B. Bhushan, "Handbook of Tribology:Materials, Coatings, and Surface Treatments" McGraw-Hill 1991

23 최희규, "A comparative study of particle size analysis in fine powder: The effect of a polycomponent particulate system" 한국화학공학회 26 (26): 300-305, 2009