유사비중의 범위에 있는 PVC, PET and PMMA 3종 혼합플라스틱의 마찰하전 정전선별이 2단계 분리공정을 통하여 수행되었다. PVC, PET and PMMA의 재질분리에 있어 효과적인 하전장치의 재질은 Polypropyl...
http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
https://www.riss.kr/link?id=A101660011
박철현 (한국지질자원연구원) ; 전호석 (한국지질자원연구원) ; 백상호 (한국지질자원연구원) ; 박재구 (한양대학교) ; Park, Chul-Hyun ; Jeon, Ho-Seok ; Baek, Sang-Ho ; Park, Jai-Koo
2007
English
KCI등재
학술저널
57-64(8쪽)
0
상세조회0
다운로드국문 초록 (Abstract)
유사비중의 범위에 있는 PVC, PET and PMMA 3종 혼합플라스틱의 마찰하전 정전선별이 2단계 분리공정을 통하여 수행되었다. PVC, PET and PMMA의 재질분리에 있어 효과적인 하전장치의 재질은 Polypropyl...
유사비중의 범위에 있는 PVC, PET and PMMA 3종 혼합플라스틱의 마찰하전 정전선별이 2단계 분리공정을 통하여 수행되었다. PVC, PET and PMMA의 재질분리에 있어 효과적인 하전장치의 재질은 Polypropylene(PP) 과 high-impact polystyrene(HIPS) 임을 확인하였다. PP 싸이클론 하전장치를 이용한 1단계 분리공정에서, PVC의 품위와 회수율은 공기속도 10 m/s, 전기장의 세기 200 kV/m 이상, 분리대 위치 +2cm, 상대습도 30% 이하의 조건에서 각각 99.6%와 97.5%로 구하였으며, HIPS 싸이크론 하전장치를 이용한 2단계 분리공정으로부터, 공기속도 10 m/s, 전기장의 세기 250 kV/m, 분리대 위치 0cm, 상대습도 40% 이하의 조건에서 PMMA의 품위와 회수율을 각각 97.8%와 95.12%로 구하였다.
다국어 초록 (Multilingual Abstract)
Triboelectrostatic separation of mixed three kinds of plastics, PVC, PET and PMMA, in the range of similar gravity has been performed through a two-stage separation process. Polypropylene (PP) and high-impact polystyrene (HIPS) were found to be the mo...
Triboelectrostatic separation of mixed three kinds of plastics, PVC, PET and PMMA, in the range of similar gravity has been performed through a two-stage separation process. Polypropylene (PP) and high-impact polystyrene (HIPS) were found to be the most effective materials for a tribo-charger in the separation of PVC, PET and PMMA. In the 1st stage using the PP cyclone charger, PVC grade and recovery depended considerably on the air velocity (10 m/s), the relative humidity (<30%), the electric field (>200 kV/m) and the splitter position (+2 cm from the center) in the triboelelctrostatic separator unit. At an optimum condition a PVC grade of 99.6% and a recovery of 97.5% was achieved. In the 2nd stage using the HIPS cyclone charger, a PMMA grade of 98.3% and a recovery of 97.0% was obtained under the conditions of 10m/s air velocity, over 250 kV/m electric field, central splitter position and less than 40% relative humidity.
Removal of PVC from Mixed Plastic Waste by Combination of Air Classification and Centrifugal Process
Development of RTD Model of the Mixer-Settler-Type Extractor Using the Stimulus-Response Method
Recovery of PET from Final Plastic Wastes using HDPE Cyclone Charger
Optimization of $Nd^{3+}$ ion co-doping in $CaAl_2O_4:\;Eu^{2+}$ blue phosphor