이상적인 수복재료는 치아의 저작기능과 심미성을 회복할 수 있어야 하며 동시에 생체 적합성과 구강 내 환경변화에 대한 내구성을 가지고 있어야 한다. 그러나 수복물이 장기간 구강 내 환...
http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
https://www.riss.kr/link?id=A40013060
2004
Korean
콤포머 ; 표면하 분해 ; NaOH 용액 ; Compomer ; Subsurface degradation ; NaOH solution
515.000
KCI등재
학술저널
144-152(9쪽)
0
상세조회0
다운로드국문 초록 (Abstract)
이상적인 수복재료는 치아의 저작기능과 심미성을 회복할 수 있어야 하며 동시에 생체 적합성과 구강 내 환경변화에 대한 내구성을 가지고 있어야 한다. 그러나 수복물이 장기간 구강 내 환...
이상적인 수복재료는 치아의 저작기능과 심미성을 회복할 수 있어야 하며 동시에 생체 적합성과 구강 내 환경변화에 대한 내구성을 가지고 있어야 한다. 그러나 수복물이 장기간 구강 내 환경에 노출되면 수복물 표면의 마모와 변색 및 수복물 자체의 파괴가 발생될 수 있다. 콤포머도 복합 레진처럼 낮은 마모 저항성을 주요한 단점으로 지적할 수 있다.
본 연구에서는 현재 유치 수복에 많이 사용되고 있는 Dyract (Dentsply, USA), Elan(Kerr, USA), F-2000(3M, USA)의 3종의 콤포머(polyacid modified resin composites)를 알칼리성 용액(0.1N NaOH)에 보관하였을 때 각 제품의 무게손실, 분해층 깊이 및 시편내에서 용출된 Si, Al과 Ba의 농도를 평가하여 제품간의 분해저항성을 평가하고 비교를 하고자 하였다.
각 제품 당 6개의 시편을 제작하여 무게 측정을 한 후, 0.1N NaOH용액, 3㎖에 저장하여 60℃에서 보관하였다. 2주후 제거하여 1.23% HCI로 2시간동안 중화하고 증류수로 세척한 60℃에서 건조하였다.
분해저항성은 무게손실, 분해층 깊이 및 시편내의 Si, Al과 Ba의 농도 변화를 근거로 평가하여 다음과 같은 결과를 얻었다.
1. 각 제품의 무게 손실량은 1.43%~2.14%까지 다양하였으며 제품 간에 유의한 차이는 없었다.
2. 각 제품의 표면하 분해층 깊이는 182.92㎛~227.70㎛였으며 제품 간에 유의한 차이는 없었다.
3. 각 제품으로부터 용출된 Si, Al양은 각 제품마다 유의한 차이가 있었으며(p<0.05), Si는 Dyract에서 Al은 F-2000에서 가장 많은 양이 방출되었다. 용출된 Ba양은 각 제품마다 유의한 차이가 없었다.
4. 무게 손실량과 표면하 분해층 깊이 사이의 상관 관계에서 비교적 높은 상관관계를 보였다(r=0.64, p<0.05).
5. 주사전자현미경 관찰시 0.1N NaOH용액에 보관한 후 콤포머기질과 필러사이의 결합의 파괴를 관찰할 수 있었으며, 기질이 소실되어 필러입자가 두드러진 양상을 보였다. 또한 필러입자의 표면은 분해에 의해 탈회된 모습을 보였다.
이상의 결과에서 현재 유치 수복에 사용되고 있는 3종의 콤포머는 분해저항성에 있어 유의한 차이를 보이지 않았다.
다국어 초록 (Multilingual Abstract)
The aim of this study was to evaluate the resistance to degradation of three commercial compomers in an alkaline solution. Dyract(Dentsply). Elan(Kerr) and F-2000(3M) polyacid modified resin composites(compomers) were used in this study. The resistan...
The aim of this study was to evaluate the resistance to degradation of three commercial compomers in an alkaline solution. Dyract(Dentsply). Elan(Kerr) and F-2000(3M) polyacid modified resin composites(compomers) were used in this study.
The resistance to degradation was evaluated on the basis of mass loss(%), degradation depth(μm) and Si, Al, Ba loss(ppm).
The results were as follows :
1. The mass loss of each brand was 1.42%-2.14% and there was no statistically significant difference of mass loss among Dyract, F2000 and Elan.
2. The degradation layer depth of each brand was 182.92-227.7μm and there was no statistically significant difference of degradation layer depth among Dyract, F2000 and Elan.
3. There was statistically significant differences in Si-loss and Al-loss among three compomers (p〈0.05). Si loss was the highest value in Dyract and Al loss was the highest value in F2000.
4. There was statistically significant correlation between mass loss and degradation layer depth (r=0.60, p〈0.05).
5. In SEM finding, there was some destruction of compomer matrix-filler interface in post-exposure specimen to NaOH solution. As the matrix decreased, the filler particles distinguished and the periphery of the filler particles appeared whitish color due to degradation.
Rett syndrome 환자의 제증상에 관한 증례보고
Streptococcus mutans의 gtfD 유전자 발현에 대한 이온 및 완충액의 영향