레이저 빔 가공과 방전 가공을 이용한 복합 미세 가공

다국어 초록 (Multilingual Abstract)

Although nanosecond pulsed laser drilling and milling are rapid and non-wear processes in micromachining, the quality cannot meet the precision standard due to the recast layer and heat affected zone. On the other hand, electrical discharge machining (EDM) is a well-known high precision machining process in micro scale; however, the low material removal rate (MRR) and tool wear remain as drawbacks. In this paper, hybrid process of laser beam machining (LBM) using nanosecond pulsed laser and micro EDM was studied for micro drilling and milling. While the quality of the micro structure fabricated by this hybrid process remains as high as direct EDM, the machining time and tool wear can be reduced. In addition, variable depth of layer was introduced as an effective method improving efficiency of hybrid milling.

참고문헌 (Reference)

1 이병욱, "마이크로 방전 밀링을 이용한 미세 구조물 제작" 한국정밀공학회 21 (21): 41-47, 2004

2 Masuzawa, T., "Wire Electro-Discharge Grinding for Micro machining" 34 (34): 431-434, 1985

3 Allen, D. M., "The Reduction of Tool Wear and Machining Time for the Micro-Electro Discharge Machining of Micro-holes by Using Copper Vapour Laser Machining as a Roughing Process" (2) : 9-11, 1997

4 Li, L., "Sequential Laser and EDM Microdrilling for Next Generation Fuel Injection Nozzle Manufacture" 55 (55): 179-182, 2006

5 Tonshoff, H. K., "Micromachining of Metals Using Ultrashort Laser Pulses" (4) : 1-6, 1999

6 Yu, Z. Y., "Micro-EDM for Three-Dimensional Cavities-Development of Uniform Wear Method-" 47 (47): 169-172, 1997

7 Chung, D. K., "Micro Electrical Discharge Milling Using Deionized Water as a Dielectric Fluid" 17 (17): 867-874, 2007

8 Meijer, J., "Laser Machining by Short and Ultrashort Pulses,State of the Art and New Opportunities in the Age of the Photons" 51 (51): 531-550, 2002

9 Tsai, Y. Y., "Investigations on Electrode Wear in Micro-EDM" 719-726, 2001