이중벽관 증기발생기에서 내관과 외관 사이의 틈새에 채워진 헬륨가스의 압력변동으로 전열관의 파손을 감지하는 방법이 개발되고 있다. 이 현상을 모사하기 위하여 압력으로 밀착된 두 평...
http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
https://www.riss.kr/link?id=A82639392
2011
Korean
550
학술저널
146-149(4쪽)
0
상세조회0
다운로드국문 초록 (Abstract)
이중벽관 증기발생기에서 내관과 외관 사이의 틈새에 채워진 헬륨가스의 압력변동으로 전열관의 파손을 감지하는 방법이 개발되고 있다. 이 현상을 모사하기 위하여 압력으로 밀착된 두 평...
이중벽관 증기발생기에서 내관과 외관 사이의 틈새에 채워진 헬륨가스의 압력변동으로 전열관의 파손을 감지하는 방법이 개발되고 있다. 이 현상을 모사하기 위하여 압력으로 밀착된 두 평판 사이의 미세한 틈새에서의 누설율을 측정하여 실험식을 개발하였다. 이 실험식에서는 틈새의 간격과 유동마찰계수가 표면조도에 의해 상호 결합된 형태로 기술되는데, 간단한 평판접촉 모델을 사용하여 유동마찰계수 식을 분리하였다. 이 실험식과 균열에서의 누설율 예측에 사용되고 있는 기존의 유동마찰계수 관련 실험식들을 비교하였다. 레이놀즈 수의 적용범위가 상이함에도 불구하고 개발한 실험식 이 0.1~0.35에서는 레이놀즈 수가 높은 경우에 적용되는 실험식들과 유사한 값을 보였다.
다국어 초록 (Multilingual Abstract)
A leak detection method has been developed by measuring the pressure variation between the inner and outer heat transfer tubes for a double wall tube steam generator. An experiment was carried out to measure the leak rate in a gap between two surfaces...
A leak detection method has been developed by measuring the pressure variation between the inner and outer heat transfer tubes for a double wall tube steam generator. An experiment was carried out to measure the leak rate in a gap between two surfaces pressed with hydraulic press in order to simulate the phenomena, and a correlation was developed for a leak rate in a micro gap. But in the correlation, the gap width and the friction coefficient were coupled by the surface roughness which affects on the two parameters. Two parameters were separated using a surface-contact model to develop a correlation for the friction coefficient. The correlation was compared with the existing correlations which are using for the crack analysis. Although the applied ranges of Reynolds number were different each other, the developed correlation in the Reynolds number of 0.1~0.35 showed similar tendencies with the existing correlations used in the higher Reynolds number.
목차 (Table of Contents)
Particle separation device based on optoelectrofluidic method
Parametric study on the effects of process parameters of an improved electrospinning method