Prediction model of the surface roughness of micro-milling single crystal copper

다국어 초록 (Multilingual Abstract)

Presently, the demand for single crystal copper micro-components is increasing in various fields because single crystal copper has good electrical conductivity. Micro-milling technology is an effective processing technology for small single crystal copper parts. Surface roughness is a key performance indicator for micro-milling single crystal copper. Establishing a surface roughness prediction model with high precision is useful to guarantee the processing quality by selecting the cutting parameters for micro-milling. Few studies have currently focused on micro-milling single crystal copper. In this study, the orthogonal experiments of micro-milling single crystal copper were conducted, and the influences of the spindle and feed speeds and axial depth of cut on the surface roughness of micro-milled single crystal copper with different orientations were analyzed by range analyses. The spindle rotation speed was the major affecting factor. The surface roughness of single crystal copper in different crystal orientations was predicted by using the SVM method. Experimental results showed that the average relative error of the surface roughness of <100>, <110>, and <111> crystal orientation single crystal copper was 2.7 %, 3.3 %, and 2.2 %, respectively, and that the maximum relative errors were 7.0 %. 10.1 %, and 3.1 %, respectively. The uncertainty analysis was conducted by using the Monte Carlo method to verify the reliability of the built surface roughness model.

참고문헌 (Reference)

1 X. H. Lu, "Surface roughness prediction model of micro-milling Inconel 718 with consideration of tool wear" 12 (12): 93-108, 2016

2 J. Yi, "Surface roughness models and their experimental validation in micro milling of 6061-T6 Al alloy by response surface methodology" 1-9, 2015

3 G. Beruvides, "Surface roughness modeling and optimization of tungsten-copper alloys in micro-milling processes" 86 : 246-252, 2016

4 M. A. Camara, "State of the art on micro-milling of materials, a review" 28 (28): 673-685, 2012

5 X. X. Wang, "Research on the prediction model of micro-milling surface roughness" 9 (9): 457-467, 2013

6 Kivak, "Optimization of surface roughness and flank wear using the Taguchi method in milling of Hadfield steel with PVD and CVD coated inserts" 50 (50): 19-28, 2014

7 X. H. Lu, "Modelling and optimization of cutting parameters on surface roughness in micro-milling Inconel 718 using response surface methodology and genetic algorithm" 14 (14): 34-50, 2018

8 T. Schaller, "Microstructure grooves with a width of less than 50 μm cut with ground hard metal micro end mills" 23 (23): 229-235, 1999

9 K. Emel, "Micro-milling performance of AISI 304 stainless steel using Taguchi method and fuzzy logic modelling" 27 (27): 817-830, 2016

10 C. Burlacu, "Mathematical modelling to predict the roughness average in micro milling process" 145 : 072004-, 2016

11 D. C. Montgomery, "Design and Analysis of Experiments, 8th Edition" 32 (32): 8-10, 2013

12 T. Guo, "Deformation characteristics and mechanical properties of single crystal copper during equal channel angular pressing by route A" 53 (53): 991-1000, 2017

13 Alexandre Gilbin, "Capability of Tungsten Carbide Micro-mills to Machine Hardened Tool Steel" 한국정밀공학회 14 (14): 23-28, 2013

14 S. S. Keerthi, "Asymptotic behaviors of support vector machines with gaussian kernel" 15 (15): 1667-1689, 2003

15 H. Richárd, "Analysis of surface roughness of aluminum alloys fine turned : United phenomenological models and multi-performance optimization" 65 : 181-192, 2015

16 M. X. Yuan, "A prediction model of surface roughness in micro end milling" 727-728 : 354-357, 2015

17 H. W. R. Schucany, "A local cross-validation algorithm" 8 (8): 109-117, 1989