http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
휴대폰용 FBAR Duplexer에 내장되는 위상천이기에 관한 연구
윤석출,송인상,이연승,김학선 한밭대학교 정보통신전문대학원 2004 정보통신전문대학원 논문집 Vol.2 No.1
본 논문은 WCDM용 Duplexer의 소형화를 위한 집적화된 1×lmm^(2)이하 크기의 RF Phase Shifter를 설계 하고 제작 평가하였다. 제안된 Phase Shifter는 PCB상에서 긴 마이크로스트립 라인 대신에 실리콘 기판 상에 집중 수동 소자인 high-Q 인덕터와 MIM 커패시터로 구현되었다. 제작된 Phase Shifter를 측정한 결과 삽입손실은 0.37 dB를 얻었고, 입력 VSWR은 15.69 dB를 얻었으며, 위상은 81˚를 얻었다. 크기도 0.8×O.9㎟ 로 제작되어 Phase Shifter의 소형화의 가능성을 보였다. In this paper, we have designed, and evaluated the integrated RF phase shifter to reduce the chip size below 1×1mm^(2) for WCDMA duplexer application. Instead of the large transmission lines on the PCB, the proposed phase shifter was used small-sized lumped elements, such as integrated high-Q inductor and MIM capacitors on silicon substrates. In the measurement results of the fabricated phase shifters, the insertion loss was 0.37dB and input VSWR was 15.68dB, the phase was 81˚. Also, the final chip size was 0.8×0.9㎟, which clearly showed the feasibility of the miniaturized RF LC phase shifter.
시뮬레이션을 통한 실리콘 고주파 집적회로를 위한 rectangular spiral 인덕터의 특성조사
윤석출,이연승,김학선 한밭대학교 정보통신전문대학원 2003 정보통신전문대학원 논문집 Vol.1 No.1
본 논문에서는 온 칩 rectangular Spiral 인덕터를 구현할때 인덕터의 크기를 고정하고 권선수를 증가시켜 Q값과 공진주파수의 변화를 보았다. 그리고 인덕터의 도체 구성 물질을 Cu와Al에 대하여 비교하여 Cu가 Al보다 더 높은 Q값을 가짐을 보았다. 또한, 기판과 spiral도체사이의 유전물질이 인덕터의 Q-factor에 어떤 영향을 미치는지를 알아보기 위해 유전물질을 SiO_2와 BCB그리고 Air로 하여 비교 분석하였다. This paper present the effect of number of turns on quality factor and SRF(Self-Resonance Frequency) of on-chip rectangular spiral inductors with a fixed outer dimension. We analyze the inductors using different metals, Copper(Cu) and Aluminum(Al), respectively and demonstrate that Cu inductors have higher quality factors. We also study the impact of various dielectric interface layers of SiO_2, BCB(Benzocyclobutene), and air.
무선 LAN RF 송수신 분석 및 시뮬레이션에 관한 연구
윤여송,김학선 한밭대학교 정보통신전문대학원 2003 정보통신전문대학원 논문집 Vol.1 No.1
본 논문에서는 IEEE 802.l1b와 IEEE 802.11a의 규격집으로부터 RF송수신 시스템의 설계를 위한 최소성능 요구 조건의 파라메터들을 제시하였으며,이 파라메터들로부터 RF송수신 시스템의 설계 과정에서 요구되어지는 최소성능 요구조건을 산출하였다. 그 산출된 값으로부터 RF송수신 시스템을 구성하기 위한 최적의 조건을 갖는 부품을 선정하여 agilent ADS로 시뮬레이션을 했다. 이러한 분석결과와 시뮬레이션 결과는 실제 무선 LAN 설계시 유용하게 사용될 수 있을 것이다. This paper presents design requirements of RF transceiver to achieve minimum required performance from specifications of IEEE 802.11b and IEEE 802.1la. The requirement and parameters will be used in the design process of IEEE 802.11 RF transceiver. After selecting components having optimal condition to develope RF trsnsceiver have been designed using an Agilent ADS(Advanced Design System). The results of analysis simulation can be used for a real wireless LAN design.
수종의 단일병 접착제의 적용 시간 연장이 건조 상아질의 미세인장 결합강도에 미치는 영향
김학근,김동준,황윤찬,오원만,황인남 大韓齒科保存學會 2005 Restorative Dentistry & Endodontics Vol.30 No.6
본 연구는 친수성 용매가 함유되어 있는 3종의 단일병 접착제의 적용 시간을 증가시켰을 때, 건조 상아질에 대한 재습윤의 효과가 있는지를 미세인장 결합강도의 측정을 통해 알아보고자 시행하였다. 실험대상은 최근에 발거한 상하악의 대구치로, 교합면 1/3 부위의 치질을 치아 장축에 수직으로 절단하여 상아질을 노출 시킨 후, 32%인산 (Unietch, Bisco Inc., Schaumburg, IL, USA)으로 15초간 산부식 하고 수세하였다. 치아는 무작위로 S군 (Single Bond), O군 (One-Step), P군 (Prim & Bond NT)으로 분류하였고, 각 군은 다시 3군 (W: 상아질 표면의 남아있는 과잉의 물을 수분에 적신 거즈를 이용하여 제거한 후, 즉시 단일병 접착제를 적용하고 광중합, D: 30초간 건조 한 후 즉시 단일병 접착제를 적용하고 광중합, 30: 30초간 건조 한 후 단일병 접착제를 30초간 적용하고 광중합)으로 소 분류 하였다. 접착제 도포 후, 복합레진을 축조하고 접착계면이 1 ㎟가 되도록 절단 하여 각 군당 20개의 표본을 사용하여 미세인장 결합강도를 측정하였다. S군, O군의 30초 적용군 (S-30, O-30)은 건조군 (S-D, O-D)보다 높은 미세인장 결합강도를 보였으며, S-30군의 경우 S-D군보다 통계학적으로 유의성 있게 높았다 (P< 0.05). 하지만, P군의 30초 적용군 (P-30)은 건조군 (P-D)에 비해 미세인장 결합강도가 통계학적으로 유의성 있게 감소하였다 (P < 0.05). The purpose of this study was to evaluate the effect of increasing application time of single bottle adhesives (SBA) to microtensile bond strength (MTBS) of dried dentin. To expose the superficial dentin surfaces, human molars were sectioned perpendicular to the long axis of tooth. 32% phosphoric acid gels were applied for 15s and rinsed. The teeth were randomly assigned to 3 groups ; S group (Single Bond), O group (One-Step), P group (Prime & Bond NT). Each group was divided to 3 subgroups (W: dentin wipe with wet gauge and light cured immediately, D: dentin dried for 30s and light cured immediately, 30: dentin dried for 30s and light cured after applying SBA for 30s). Composite resin was built up on the dentin surface and sectioned to obtain 20 specimens with 1 ㎟ cross sectional area and the MTBS was measured. For Single Bond, the mean MTBS of S-W and S-30 group were higher than that of S-D group statistically (P < 0.05). For One-Step, the mean MTBS of O-D group was statistically lower than that O-W group (P < 0.05). For Prime & Bond NT, the mean MTBS of P-30 group was statistically lower than that of P-D group (P < 0.05).
전도성 Nylon 6/Polypyrrole복합체의 제조 및 그 전기적 성질
박연흠,박학수,남성우,안동문 成均館大學校 科學技術硏究所 1992 論文集 Vol.42 No.2
Electrically conducting nylon 6/polypyrrole composite films and fabrics have been prepared by polymerizing pyrrole vapor in nylon 6 matrix containing cupric chloride as an oxidizing agent. After polymerization of pyrrole for 30 min, the conductivities of composites reach as high as 10^-3∼10^-2 S/cm depending on the content of oxidizing agent. The stability of conductivity to ambient air exposure is excellent ; there occurs little change in conductivity on exposing the composites to ambient air for one month. The nylon 6 composite fabrics containing 14∼25 wt.% of polypyrrole show an excellent antistatic properties.
잣나무 (Pinus koraiensis) 목부의 추출성분
이학주,최윤정,최돈하,홍인표 한국목재공학회 2003 목재공학 Vol.31 No.5
잣나무 목부 에탄올 조추출물로부터 7종의 화합물을 단리하였으며, 기기분석 결과 flavonoids인 5-hydroxy-7-methoxyflavone을 비롯하여 chrysin, pinocembrin, pinobanksin, galangin 그리고 stilbenoids 화합물인 3-hydroxy-5-rnothoxystilbene과 pinosylvin으로 각각 동정되었다. Two stilbenoids and five flavonoids were isolated from wood of Pinus Roraiensis(Pinaceae). The chemical structures of isolated compounds were determined as : 5-hydroxy-7-methoxyflavone, chrysin, galangin, pinocembrin, pinobanksin, 3-hydroxy-5-methoxystilbene and pinosylvin on the basis of Mass and NMR spectroscopic data.