배드민턴 클럽멤버의 참여동기와 운동몰입이 운동지속에 미치는 영향

김영훈 ( Kim¸ Young-hun ),김재호 ( Kim¸ Jae-ho ) 미래융합통섭학회 2021 현대사회와 안전문화 Vol.4 No.2

연구목적 본 연구의 목적은 배드민턴 클럽멤버의 참여 동기와 운동몰입이 운동 지속에 미치는 영향을 분석, 규명하는데 주된 목적이 있다. 연구방법 이 연구는 2020년 대한민국 국민을 중심으로 이루어졌다. 결과 연구의 대상은 배드민턴 클럽멤버들의 전체 320명을 모집단으로 편의표본추출법을 사용하였고, 자기평가·기재법으로 응답을 불성실하게 답변하거나 일부 누락 된 자료를 제외한 전체 298명을 선정하여 SPSS 18.0의 통계프로그램을 활용하여 빈도분석(Frequency Analysis)과 신뢰도 분석, 상관분석(correlation analysis)과 다중 회기 분석(Multiple regression analysis)을 연구목적에 맞게 자료 처리한 결과를 중심으로 다음과 같은 결론을 도출하였다. 결론 도출된 연구결과를 통한 주요 결론은 다음과 같다. 첫째, 배드민턴 동호인의 참여 동기(즐거움, 기술발달, 건강/체력, 사교)가 운동 지속(운동능력, 운동 친구)에 각각의 변인 간 부적인 상관관계가 나타났다. 둘째, 배드민턴클럽멤버의 운동몰입(인지몰입, 행위몰입)은 운동 지속에 미치는 영향은 없는 것으로 나타났다. 셋째, 배드민턴 동호인의 참여 동기(즐거움, 기술발달, 건강/체력, 사교)는 운동 지속(운동능력, 운동 친구)에 영향을 미쳤다. PURPOSE The purpose of this study is to verify the impact of badminton club members' Participation Motivation on Excellence. RESULT The study included 320 badminton club members using the Convenience Sampling Method (CSM), and 298 people were selected for the purpose of the study, excluding some missing data. The data processing was conducted using the statistical program of SPSS 18.0 to perform Frequency Analysis, Reliability Analysis, Correlation Analysis, and Multiple regression analysis. CONCLUSION The main conclusions from the findings are as follows. First, there was a negative correlation between badminton club members' motivation for partication (Pleasure, Technological development, Health/strength, socialization) and each other's variation in Excellence (exerciseability, excellence friend). Second, it has been shown that the members of the badminton club's exercise immersion has no effect on the continuation of the sport. Third, badminton club members' motivation for participation (Health/strength, socializing) influenced their excellence.

중국 대운하의 역사 기억과 세계문화유산 등재

조영헌 ( Cho¸ Young-hun ) 고려대학교 역사연구소 2022 사총 Vol.105 No.-

장구한 역사를 가진 중국의 대운하 물류 시스템은 사실상 19세기 후반기에 막을 내렸다. 이후 1세기 이상 방치되어 있던 대운하가 2014년 6월 22일 카타르 도하에서 열린 제38회 유네스코 세계문화유산 위원회에서 세계문화유산으로 등재되었다. 세계문화유산에 등재되기 위해서는 기본적으로 ‘탁월한 보편적 가치(Outstanding Universal Value, OUV)’를 부각하는 동시에, 얼마나 그 문화적 가치가 잘 보존되어 있으며 앞으로 어떻게 관리해나갈 것인지에 대한 증명이 이루어져야 한다. 이른바 진정성(integrity)과 완전성(authenticity), 보호 및 관리 체계(protection and management requirements)에 대한 요건을 충족해야 하는 것이다. 그렇다면 지난 1세기 이상 방치되었던 대운하가 2014년에 세계문화유산으로 등재될 수 있었던 이유는 무엇이고 중국 정부는 이를 통해 무엇을 기대했을까? 이는 직접적으로 세계문화유산 등재 프로젝트가 본격적으로 가동된 2006년 이후의 상황 변화와 관련이 깊겠지만, 이러한 프로젝트가 가능할 수 있었던 역사적 배경에 대한 고찰도 필요하다. 특별히 대운하가 물자 유통로로서의 기능을 상실했던 19세기 이후부터 다시 이에 대한 또 다른 중요성에 주목하게 된 21세기 초기까지, 대운하에 대한 인식전환이 발생하게 된 과정과 계기를 주목할 필요가 있다. 즉 조운(漕運) 기능이 사라진 이후 대운하의 기능과 보존에 대한 인식전환이 발생하는 과정을 역사적 맥락 속에서 정리해보는 것이 본고의 목적이다. 이를 위해 간략하게 대운하의 역사를 정리하고, 조운 기능이 사라진 19세기 이후 대운하의 기능이 파편화되는 과정을 살펴본 후, 1949년 중화인민공화국 성립 이후 대운하에 새롭게 부여된 2가지 기능과 함께 21세기에 진입한 직후 세계문화유산으로 등재되어 활용되는 배경까지 검토하였다. The long-standing logistics system of China's Grand Canal actually ended in the late 19th century. The Great Canal, which had been neglected for more than a century, was listed as a World Heritage Site at the 38th UNESCO World Heritage Committee held in Doha, Qatar on June 22, 2014. In order to be listed as a World Heritage Site, it must basically emphasize "Outstanding Universal Value (OUV)" while proving how well its cultural value is preserved and how it will be managed in the future. The requirements of integrity, authenticity, protection and management requirements must be met. So why did the Grand Canal, which had been neglected for more than a century, be listed as a World Heritage Site in 2014 and what did the Chinese government expect from it? This will be directly related to the change in the situation since 2006, when the World Heritage listing project began in earnest, but it is also necessary to consider the historical background behind the project. Therefore, this paper aims to find out the meaning and various intentions behind the 2014 World Heritage listing, analyzing the process of changing awareness of the function and preservation of the Grand Canal in terms of "history memory" and long-term historical context. Chapter 2 summarizes the history of three changes in memory of the Grand Canal, and Chapter 3 examines the process of forming a fourth image of the Grand Canal as the function of ‘caoyun’ has been fragmented since the 19th century. In Chapter 4, I examined how the two functions newly assigned to the Grand Canal changed the fourth image since the establishment of the People's Republic of China in 1949. In Chapter 5 and the conclusion, the possibility of the success of the new fifth historical memory, which was formed when it was registered as a World Heritage Site, is examined.

1938년 재미한인사회의 갈등 속 신두식(申斗湜)의 역할

박영훈 ( Park¸ Young Hun ) 수선사학회 2021 史林 Vol.- No.77

As the Second Sino-Japanese War broke out in 1937, Korean-Americans’ hope for independence rose up, however, a dispute over method was ignited. The headquarters of Korean National Association of North America(K.N.A) maintained the assistance to Provisional Government(P.G), while the United Korean Society to Aid China(U.K.S) insisted anti-Japanese movement in America. This resulted in division in K.N.A, as it was combined with political, emotional, and monetary problems. Doo Sik Shynn, editor in chief of The New Korea, tried to arbitrate K.N.A.H.Q. and U.K.S. On the one hand, Shynn demanded K.N.A.H.Q. to execute possible methods, more than the monetary aid to P.G, and on the other hand, he explained the situation of K.N.A to members of U.K.S. to settle down their discontent. K.N.A.H.Q. became antagonistic to Shynn who openly supported U.K.S, and as a result, Shynn lost his position in K.N.A and The New Korea. The absence of Shynn brought a full-fledged conflict. K.N.A.H.Q. attempted direct control over U.K.S, which U.K.S. openly opposed. Eventually, U.K.S. created a new political group, independent from K.N.A.

RC T형 벽체의 횡보강 설계를 위한 변위기반설계법의 적용

오영훈 ( Oh¸ Young-hun ),최창식 ( Choi¸ Chang-sik ),이리형 ( Lee¸ Li-hyung ) 한국구조물진단유지관리공학회 2002 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.6 No.1

RC structural walls are frequently used as lateral force-resisting element in multi-story building construction because their stiffness and strength give a good protection against the damage and collapse of building structures. If RC structural walls are properly designed and proportioned, these walls can also behave as ductile flexural members like beams and columns in moment frames. To achieve this goal, the designer should provide adequate strength and deformation capacity of structural walls corresponding to each performance level. In this study, drift demand and extreme concrete compressive strain of T-shaped structural walls were investigated on the basis of displacement-based design. These results can be used to determine available deformability for T-shaped structural walls with different longitudinal reinforcement ratio, distribution of longitudinal reinforcement, lateral confinement ratio and axial load ratio.

M2-derived amphipathic helices inhibit influenza viral infection by deformating membrane

Younghun JUNG,Seokoh MOON,Hyun Seok OH,Yoonjin BAE,Jaehyeon HWANG 한국생물공학회 2019 한국생물공학회 학술대회 Vol.2019 No.4

Inhibition of influenza viral infection by M2-derived peptides via deforming membrane

Younghun JUNG,Seokoh MOON,Hyun Seok OH,Yoonjin BAE,Jeahyeon HWANG 한국생물공학회 2019 한국생물공학회 학술대회 Vol.2019 No.10

Load-Balance-Independent High Efficiency Single-Inductor Multiple-Output (SIMO) DC-DC Converters

Younghun Ko,Yeongshin Jang,Sok-Kyun Han,Sang-Gug Lee 대한전자공학회 2014 Journal of semiconductor technology and science Vol.14 No.3

A single-inductor multiple-output (SIMO) DC-DC converter providing buck and boost outputs with a new switching sequence is presented. In the proposed switching sequence, which does not require any additional blocks, input energy is delivered to outputs continuously by flowing current through the inductor, which leads to high conversion efficiency regardless of the balance between the buck and boost output loads. Furthermore, instead of multiple output loop compensation, only the freewheeling current feedback loop is compensated, which minimizes the number of off-chip components and nullifies the need for the equivalent series resistance (ESR) of the output capacitor for loop compensation. Therefore, power conversion efficiency and output voltage ripples can be improved and minimized, respectively. Implemented in a 0.35- μm CMOS, the proposed SIMO DC-DC converter achieves high conversion efficiency regardless of the load balance between the two outputs with maximum efficiency reaching up to 82% under heavy loads.

Malignant Hypertension with Pulmonary Alveolar Hemorrhage Needing Dialysis

Younghun Kim,Ki Tae Bang,Jong Ho Shin,Ju Ri Kim,Joo Heon Kim,Jin Uk Jeong 이화여자대학교 의과학연구소 2017 EMJ (Ewha medical journal) Vol.40 No.2

Lithographic Data Generation Algorithm based on Micromirror Cell Decomposition

Younghun Jin,Kiwon Park,Haeryung Kim,Manseung Seo 제어로봇시스템학회 2006 제어로봇시스템학회 국제학술대회 논문집 Vol.2006 No.10

Nanowastes treatment in environmental media

Younghun Kim 환경독성보건학회 2014 환경독성보건학회지 Vol.29 No.-

Objectives : This paper tried to review a recent research trend for the environmental exposure of engineered nanomaterials (ENMs) and its removal efficiency in the nanowaste treatment plants. Methods : The studies on the predicted environmental concentrations (PEC) of ENMs obtained by exposure modeling and treatment (or removal) efficiency in nanowaste treatment facilities, such as wastewater treatment plant (WTP) and waste incineration plant (WIP) were investigated. The studies on the landfill of nanowastes also were investigated. Results : The Swiss Federal Laboratories for Materials Science and Technology group has led the way in developing methods for estimating ENM production and emissions. The PEC values are available for surface water, wastewater treatment plant effluents, biosolids, sediments, soils, and air. Based on the PEC modeling, the major routes for the environmental exposure of the ENMs were found as WTP effluents/sludge. The ENMs entered in the WTP were 90-99% removed and accumulated in the activated sludge and sludge cake. Additionally, the waste ash released from the WIP contain ENMs. Ultimately, landfills are the likely final destination of the disposed sludge or discarded ENMs products. Conclusions : Although the removal efficiency of the ENMs using nanowaste treatment facilities is acceptable, the ENMs were accumulated on the sludge and then finally moved to the landfill. Therefore, the monitoring for the ENMs in the environment where the WTP effluent is discharged or biomass disposed is required to increase our knowledge on the fate and transport of the ENMs and to prevent the unintentional exposure (release) in the environment.