인터넷 상의 다중공격에 대비한 침입탐지시스템 모델 설계

최주영,최은정,이지윤,윤세안,김명주 서울여자대학교 자연과학연구소 2000 자연과학연구논문집 Vol.12 No.-

Since modern attacks against information system utilize large-scale and distributed network, they become more versatile and complicated. We propose a new model of intrusion detection system, IDSS that can effectively detect multiple resource attack from to the inter-system and intra-system. IDSS (Intrusion Detection System for Seoul women's university) is optimized in agent unit to detect multiple attacks on network effectively and designed to and respond to them in real time.

서울시 역세권 주차장의 운영 합리화에 관한 연구

고주연,금기정,김현정,김현주,홍영식 明知大學校 産業技術硏究所 1995 産業技術硏究所論文集 Vol.14 No.-

In this study, we study about park and ride facilities at subway station in seoul, since we have perceived that park and ride facilities at subway's station's serious problem on its operation and usage. We practiced the interviews and transfer rate survey so found these problems of operation usage problem, spatial utilization, private park and ride facilities. Through the analysis of these problem we propose the adequate alternatives and we hope that our study contribute operation rationalization of park and ride facilities at subway station.

NiTi scissors-bite corrector의 와이어 굵기에 따른 3차원적 치아 이동 양상

전현주,박선형,정상혁,전윤식 대한치과교정학회 2009 대한치과교정학회지 Vol.39 No.1

Objective: The purpose of this study was to compare the difference in three dimensional tooth movement using three different wire sizes (0.018 × 0.025-in, 0.016 × 0.022-in, 0.016-in) on a NiTi scissors-bite corrector. Methods: Computed tomography (CT) images of the experimental model before and after tooth movement were taken and reconstructed into three dimensional models for superimposition. The direction and the amount of tooth movement were measured and analyzed statistically. Results: The lingual and intrusive movements of the crown of the maxillary second molar were increased as the size of the NiTi wire increased. The roots of the maxillary second molars moved buccally except for the 0.016-in group. The intrusive movement of the roots of the maxillary second molars was increased as the size of the NiTi wire increased. Due to the use of orthodontic mini-implants, anchorage loss was under 0.2 mm on average. Conclusions: The 0.018 × 0.025-in NiTi wire was most effective in lingual and intrusive movement of the maxillary second molar which was in scissors-bite position. Indirect skeletal anchorage with a single orthodontic mini-implant was rigid enough to prevent anchorage loss. 본 연구에서는 NiTi scissors-bite corrector를 세 가지 서로 다른 굵기 0.018" × 0.025", 0.016" × 0.022", 0.016" 의 NiTi 와이어로 제작하였을 때 각각의 치아 이동 양상을 치아 이동 시뮬레이션 장치인 Calorific machine을 이용하여 3차원적으로 분석하고자 하였다. 가위교합에 이환된 상악 제2대구치 모형을 제작하고 제2소구치와 제1대구치 사이에 교정용 미니 임플랜트(orthodontic mini-implant)를 식립하여 제1대구치에 간접골성고정원을 설계하였다. 세 가지 굵기의 NiTi scissors-bite corrector를 부착하여 실험하였다. 치아의 이동 전후에 실험 모형은 computed tomography (CT)로 촬영하고 3차원 데이터로 변환하여 중첩하였다. 치아 이동 방향과 이동량을 계측하여, NiTi scissors-bite corrector 와이어 굵기에 따른 치아 이동 양상에 관한 통계적 유의성을 검정한 결과, 제2대구치 치관의 설측 이동량은 0.018" × 0.025"군(2.65 mm)이 가장 많았으며, 0.016"군(1.96 mm)과 통계적으로 유의한 차이를 보였다(p < 0.05). 제2대구치 치관의 압하량은 0.018" × 0.025"군(2.35 mm), 0.016" × 0.022"군(1.18 mm), 0.016"군(1.00 mm)으로 0.018" × 0.025"군이 나머지 두 군과 유의한 차이를 보였고 (p < 0.05), 치근의 압하량은 0.018" × 0.025"군(4.19 mm), 0.016" × 0.022"군(3.29 mm), 0.016"군(2.24 mm)으로 세 군 간 모두 통계적 유의차를 보였다 (p < 0.05). 치아의 이동 양상을 관찰한 결과, 0.016"군에서는 제2대구치 치근의 협측 이동이 나타나지 않았다. 간접골성고정원으로 사용된 제1대구치의 고정원 소실은 0.2 mm 이하로 나타났다. 이상의 결과를 토대로 0.018" × 0.025" NiTi 와이어로 제작한 NiTi scissors-bite corrector를 교정용 미니 임플랜트를 이용한 간접골성고정원과 함께 이용하였을때, 최소한의 고정원의 소실과 함께 가장 큰 상악 제2대구치의 설측 이동 및 압하가 일어났다고 할 수 있다.

다양한 교정용 미니 스크류의 인공 피질골 두께에 따른 삽입 토오크와 Pull-out 강도 비교

송영윤,차정열,황충주 대한치과교정학회 2007 대한치과교정학회지 Vol.37 No.1

본 연구는 스크류의 역학적인 특성을 알아보고자 세 종류의 self-drilling형의 교정용 미니 스크류 (Type A; 순수한 원통형, Type B; 내경이 증가하는 구간이 있는 부분적인 원통형, Type C; 원통형과 원추형이 함께 있는 복합형)를 피질골의 두께를 다르게 설정한 인공골 시편에 삽입하였다. 일정한 회전 속도와 수직력을 부여할 수 있는 구동식 토오크 시험기(Biomaterials Korea, Seoul, Korea)를 이용하여 삽입 토오크를 측정하고 만능시험기(Instron 3366, Instron, Norwood, MA, USA)를 이용하여 Pull-out 강도를 측정하여 다음과 같은 결과를 얻었다. 피질골 두께의 증가에 따른 최대 삽입 토오크(maximum insertion torque) 값은 Type A는 차이가 없는 반면(p> 0.05), Type B와 Type C에서는 유의한 증가가 관찰되었다(p<0.05). 모든 피질골 두께에서 Type C > Type A > Type B의 순으로 최대 삽입 토오크 값이 크게 나타났다(p<0.05). Pull-out 강도는 모든 경우에 Type A가 Type B와 Type C보다 낮게 측정되었다(p<0.05). Type별로 피질골 두께와 최대 삽입 토오크, Pull-out 강도 간에 통계적으로 유의한 상관관계가 있었다(p<0.05). 이상의 결과는 미니 스크류 식립을 위한 디자인 선택 시 식립부위의 피질골 두께를 고려해야 함을 시사한다. Objective: The purpose of this study was to evaluate the mechanical performance of mini-screws during insertion into artificial bone with use of the driving torque tester (Biomaterials Korea, Seoul, Korea), as well as testing of Pull-out Strength (POS). Methods: Experimental bone blocks with different cortical bone thickness were used as specimens. Three modules of commercially available drill-free type mini-screws (Type A; pure cylindrical type, Biomaterials Korea, Seoul, Korea, Type B; partially cylindrical type, Jeil Medical, Seoul, Korea, Type C; combination type of cylindrical and tapered portions, Ortholution, Seoul, Korea), were used. Results: Difference in the cortical bone thickness had little effect on the maximum insertion torque (MIT) in Type A mini-screws. But in Type B and C, MIT increased as the cortical bone thickness increased. MIT of Type C was highest in all situations, then Type B and Type A in order. Type C showed lower POS than Type A or B in all situations. There were statistically significant correlations between cortical bone thickness and MIT, and POS for each type of the mini-screws. Conclusion: Since different screw designs showed different insertion torques with increases in cortical bone thickness, the best suitable screw design should be selected according to the different cortical thicknesses at the implant sites.

전문비서란 무엇인가? : Its Concept and Function

김주연,용주현,신동희,유민,최정윤 이화여자대학교 법정대학 비서학과 1995 비서학연구 Vol.- No.15

NC 선반의 직선 사이클 평면 위치결정 정도 측정 및 분석

김영석,정정표,한지희,윤원주 朝鮮大學校 機械技術硏究所 2003 機械技術硏究 Vol.6 No.2

It is very important t o measure linear cycle plane positioning accuracy of NC lathes because the plane positioning accuracy affects accuracy, performance, interchange-ability and quality of machine parts machined by the NC lathes in industries. Until now, linear cycle plane positioning accuracy test of NC lathes has not been carried out because the two axes of NC lathe are moving simultaneously crossing a t right angle each other. while positioning accuracy test of one axis of NC lathe is briskly carried out using a laser interferometer system in industries. So, in this study, a measuring units system to measure simultaneously two axes' plane. positioning accuracy of NC lathe was composed of two optical linear scales installed on the. z and x-axis of work coordinate system on NC lathe and a computer inserted with PC counter card enables to obtain measuring data. Here, ATC(Automatic Tool Changer) and moving part of linear scale are fixed with magnet bases in order to measure displacement of the ATC of NC lathe. And next, computer software was developed in order to measure the lathe under resolution of 0.1㎛ by the linear scales, and also computer soft measuring data could be modeled on plots and be analyzed to numerically.

담양신설 IC의 교통소음도 조사연구

최형일,강영주,채희정,김연풍,조도호,설동화,정숙경 조선대학교 환경공해연구소 2007 環境公害硏究 Vol.20 No.1

After the vehicle has become a large formation with high-speed, loud noise from an express highway is increasing, and the number of large-scale apartment complexes, which are recently being constructed in the metropolitan area nearby the express highway and IC, is increasing gradually. Compared with a main road, the traffic volume and the speed of a vehicle between IC and the ramp way [turn-off] are smaller. If the ramp way is rightly connected with the downtown area, however, the traffic-noise that comes about in surrounding areas will be in conjunction with the traffic-noise from the main road of express highway and that of the ramp way. This research has selected a place that hasn't had a road or a commercial quarter nearby the main-road of IC and ramp way. Then we have studied the traffic-noise status under minimizing influence of its outer-noise, which occurs in IC. 1. The traffic volume change of a small and full-sized car with time has been kept on regularity in 2004 and 2005. As the traffic volume of a full-sized car has diminished remarkably, it has been maintaining through 6:00a.m.-10:00 a.m. As it has decreased since lO:OO a.m.. we have also observed the traffic proportion going up. 2. Monthly traffic volume of small cars was higher in May, August and October than other months. We have observed that the high traffic volume during these months is due to the following: May-The Damyang festival, August-a high-demand season, October-viewing scarlet maple leaves. Monthly traffic volume of full-sized cars was generally higher in August, but it has decreased during 2006. This was due to the many construction trucks that were working on the extension of the 88 Olympic expressway. Therefore, there was more traffic volume in 2006 compared to 2004 and 2005. 3. In this study, the noise figures have been less than 55 dB(A) in 18 spots. There were 14 spots from 55dB(A) to 58dB(A). 58-61dB(A) : 20, 61-64dB(A) : 17, 64-67dB(A) : 18. There were 8 spots we observed at the highest level from 67dB(A) to 70dB(A). Those were the nearby spots separating the main road and Damyang IC. 4. Traffic-noise at the boundary between IC and the main road of an expressway was higher than that of the same distance in other places. 5. We have observed that traffic-noise is low in places with mountains that serve the role of soundproofing walls. Thus, the fundamental sound hadn't affected it.

회생용 4분할 2상 쵸퍼에 의한 회생영역의 확대

이승환,김용주,한경희,정연택,강승욱 明知大學校 産業技術硏究所 1993 産業技術硏究所論文集 Vol.12 No.-

In this paper, we proposes two phase chopper system with flour. separate groups of D.C motor for regenerative braking. The main circuit consists of four sets of chopping parts, eight diodes and four separate groups of D.C motor. Although the proposed chopper circuit requires more circuit elements than the conventional two phase chopper system with, combined output, it has the following advantages: (1) The region of regenerative braking becomes twice as that of the conventional two phase chopper system. (2)Current division of load becomes equalized. Therefore. it is possible to drive not only series motor but also shunt and separately excited motor (3) The harmonic component of the source current is greatly diminished.

베체트병에서 비스테로이드성 소염진통제에 의해 발생한 대량 소장출혈 1예

강인숙,류연주,장지은,정성애,이지수,조영주,이경은,이지희 이화여자대학교 의과대학 2003 EMJ (Ewha medical journal) Vol.26 No.2

Bechet's disease(BD) is a chronic inflammatoroy condition involving several organs inclu-ding gastrointestinal tract. Gastrointestinal tracts involvement in BD has been identified throughout the entire alimentary tract and commonly accompanies ulcerative lesions in the small and large bowel. It is debatable whether BD could be included among seronegative spondyloarthropathy (SPA).SPA usually occurs without overt sign of intestinal inflammation, but significant number of patients have asymptomatic intestinal inflammation, usually affecting ileum. Since most patients with SPA in-cluding BD are treated with NSAIDS. However, NSAID may play a role in aggravation or provo-cation of intestinal inflammation. Special attention to asymptomatic intestinal inflammation is needed, especially when NSAIDs are used for management of arthritic symptom in SpA. We experienced a case of BD which was complicated by a massive small bowel bleeding precipitated by NSAID use. 저자들은 베체트병 환자에서 비스테로이드성 소염진통제 사용 후 발생한 대량 소장 출혈의 1예를 경험하였기에 문헌고찰과 함께 보고하는 바이다.

前腕部 經穴 取穴에서 骨度分寸法과 一夫法의 比較 硏究

박히준,채윤병,차웅석,박종배,이혜정,이향숙,인창식,고형균,김수영,최일환,김강식,문정배,배기태,유경환,육근영,정병주,손인철,임사비나 WHO COLLABORATING CENTRE FOR TRADITIONAL MEDICINE 2004 東西醫學硏究所 論文集 Vol.2004 No.-

Background : The cun measurement System, an essential and convenient method in locating acupoints, has been widely used in the practice of acupuncture. However, traditional cun measurement has been criticized for its lack of reliability. Objectives : The purposes of this study are to determine if one cun measured by the directional methods have a consistency with that of proportional methods and to investigate which factors are related with these differences, especially in forearm. Methods : The distance between the elbow crease and the wrist crease of forearm was compared to a reference value of one cun obtained by the directional method. In this method, one cun is one third of the distance between index finger and Small finger of a subject, measured at proximal interphalangeal joint. In addition, to investigate the factors influencing the differences between these two methods, we measured the height and body weight and calculated body mass index (BMI). Finally we analyzed the factors correlated with these lengths by linear regression test. Results : The results showed that one cun obtained by the directional methods were significantly different from one cun by the proportional methods in forearm. It was demonstrated that the length acquired with the directional method was more correlated with body weight and body mass index, while the length obtained by the proportional method was more correlated with the height.