각도 분석에 따른 그라듀에이션 커트 연구

유경원ㆍ송제호(Kyoung Won YouㆍJe Ho Song) 한국인체미용예술학회 2016 한국인체미용예술학회지 Vol.17 No.1

In this study, a mannequin’s dimensions were measured and a diagram’s projection applicable in practice was created in order to determine if the graduation design formed by the lines that represent the shape of the diagram at 45 degrees and its gravity direction matched the actual design. In addition, the length of the nape point (N.P) was set to 50mm, and a layered formation pattern was taken advantage of by using the head crest. This was then compared with 45-degree graduation forms, and the diagram was improved and reconfigured. The study results found the following: First, in the nape section, 40 degrees should be maintained, and a 20mm layer is formed. Second, in the middle section, 55 degrees, which creates a slight heavy feeling and smooth layer (10mm), should be applied. Third, in the radial section, which is greater than other sections in terms of curvature, 80 degrees should be applied to form an approximately 9mm layer. Consequently, the projection increases 13 degrees on average in comparison with a 45-degree diagram, and about 39mm layer will arise. Upon the graduation haircut, it is difficult to create a constant flow of layers and shapes with the diagram under a single angle, making satisfying results unlikely. Therefore, the projection by section should be individually set to have the haircut wanted by the diagram. In terms of the shape of a graduation formed by a different projection, in conclusion, an oval style similar to the shape in the back of the head was observed.

연속파형 Nd:YAG 레이저를 이용한 SM45C 용접특성

유영태,노경보,오용석 朝鮮大學校 機械技術硏究所 2002 機械技術硏究 Vol.5 No.2

The Nd:YAG laser in combination with the optical fiber increase the automation and the flexibility of a whole industry. The Nd:YAG laser welding process in one of the most advanced manufacturing technologies owing to its high speed and penetration. This paper describes the weldability of SM45C carbon steel for machine structural use by Nd:YAG laser. Major process parameters were position of focus, travel speed and laser power. The results showed that peneration depth of the weld was increased with increasing applied laser power. Microstructural examinations and calculations and indicated that the microstructure of the laser weld, which experienced very high heating and cooling cycle during welding process. The results of this study provide application possibility of Nd:YAG laser welding for SM45C carbon steel

1984년 '구로지역 민주노조운동'의 전개와 특징 : 구로동맹파업의 주체형성 과정에 대하여

유경순 역사학연구소 2001 역사 연구 Vol.- No.9

The Main aim of this thesis is to examine formation process of labor capacities which made it possible to go on the Guro Alliance Strike against the government oppression of trade union in 1985. The Guro Alliance Strike broke out with the arrest of "Daewoo Apparel trade union staff" in 1986, June 22th. The Guro Alliance Strike occurred with four trade union alliance strike on June 24th, and developed until Daewoo Apparel labors were broken-up by compulsion on June 29th. The labor capacities of the Guro Alliance Strike were formed by the labor movement of the first half 1980, and by the process of development of the Guro labor movement in 1984. The development of labor movement was searched by the closed-door activities in the first half 1980s when government used the oppression of violence. But a lot of student activists collectively engaged the manufacturing industry, thus they grew up as new subjects of the labor movement. The advanced labors, who were grown up by participating democratic trade union activities in the 1970s, also organized the group behind closed doors, and tried to do new activities. These Two subject generally found the direction of the labor movement, having the critical mind that democratic trade union movement should overcome isolated disperbility and trade unionism. As a result, new current of the Guro democratic trade union movement in 1984 was formed at the Guro area. When the oppressive control of government was withholded for a while, that is, the appeasement phase, labors developed the struggled for the demend for higher wages and the betterment of working conditions, and then formed the trade union. There was also increasing in democratic trade union movement at the Guro area, so many trade unions could be formed at a lot of work places, such as Daewoo Apparel, HyoSung MoolSan, SunIl SumYu, GaRiBong JunJa. In the early stage of the making of democratic trade union, because of the physical, ideological oppression of the capitalist, the figure of union members decreased, but the core union members could keep on their union with the devoted struggle. After overcoming oppression of the capital, the trade union developed the labor's daily activities by itself, like orgnizing a small group for his(her) hobby and culture or solving out a educational problem, propaganda campaign, dissatisfaction matters based on the demend and interesting of the labor. The trade union tried to make the labor's daily activities be intercommunicated, instead of making the his(her) daily activities stay at the single workplace. Being based on the activities, the trade union got the higher wages through the strike struggle which made it possible for trade union members unite together, then made wage raise policy of government be withholded, and labors get the selfconfidence in 1985. The victory of the strike struggle for the wages raise gave the ability, and reliance to the trade union, and union members, so they could see trade union members be increasing. The character of the trade union activities in this period was to find solidarity. There was a objective condition making trade unions solidify. that was the same area, and same type of industry where the labors worked. Besides, It was also iomportant conditon for the solidarity that a lot of the trade unions were formde at the same time, and they could overcome the oppression of the trade union formation. These process could became the bases of labor capacities which made it possible solidarity struggle for government oppression of democratic trade union.

委巷詩集 序·跋에 나타난 文學論

任侑炅 翰林大學校 泰東古典硏究所 1988 泰東古典硏究 Vol.4 No.-

패션감성의 측정도구 개발에 관한 연구(제2보)

이경희,김유진 한국의류학회 2003 한국의류학회지 Vol.27 No.5

The purpose of this study was to develop the measurement of fashion sensibility and to verify the validity and utility. The survey has been done 91 photos selected in fashion magazines with 25 semantic differential bi-polar scale. The obtained data were analyzed by MDS, Discriminant analysis and Regression analysis. The major findings of this research were as follows. 1. According to the sensibility positioning, fashion image was classified by 4 group and agreed with constructing factors of fashion. 2. As result of the discrimination analysis, distinguishable fashion sensibility among design elements of clothing was related to refined, pleasant, feel like buying sensibility. 3. As result of the regression analysis, Preference was related to looking good, refined, and sweet, Buying needs related to likable, looking good and natural, Riches related to elegant, neat and refined, Pleasure related to looking good, elegant and bright. 4. The fashion design properties were different regarding Preference, Buying needs, Riches and Pleasure. Preference and Buying needs were related to H-line, similarity color combination, cotton and linen, Riches related to brilliance texture, ruffle and flounces, Pleasure related to fit and sexy design of clothing.

패션에 나타난 감성과 감정의 조형적 특성 연구

김유진,이경희 한국의류학회 2004 한국의류학회지 Vol.28 No.1

The purpose of study was to provide effective design strategy and distinguish productions for the consumer′s emotion satisfaction by analyzing formative properties of fashion sensibility and emotion. 54 photos of contemporary costume have been selected which represented the Izard′ DES. The questionnaire consisted of bi-polar 25 pairs adjective scale of fashion sensibility and 18 noun scale of emotion was distributed to 970 male and female living in Pusan area. The data were analyzed by GLM using the statistic SPSS package. The major findings of this research wre as follows. 1. In the clothing formative properties following fashion sensibilities, aestheticism shows significant differences in the silhouette and texture, maturity in the silhouette and color, character in the texture and decoration and feminity in the pattern and color. 2. In the clothing formative properties following emotions, negative emotion shows significant differences in the pattern and silhouette, distress·fear in the silhouette and pattern, arousal in the texture and color, shame in the color and texture and enjoyment in the silhouette and pattern. 3. In the fashion sensibility and emotion following clothing formative properties, each formative property shows differences in fashion sensibility and emotion. This study result will be utilized in the clothing design development in special usage like theatrical costume, discriminated display and advertisement stratge.

건초 섬유종 1예

문경원,김소연,최유원,명기범,김성현 대한피부과학회 2006 大韓皮膚科學會誌 Vol.44 No.4

任允摯堂의 傳 서술 방식과 여성의식

임유경 翰林大學校 泰東古典硏究所 1999 泰東古典硏究 Vol.16 No.-

소아환자에 있어서 외상방지를 위한 마우스가드의 치험례

김경희,김종수,유승훈 大韓小兒齒科學會 2005 大韓小兒齒科學會誌 Vol.32 No.3

구강악안면 영역의 외상은 치아파절, 탈구, 골절, 연조직 손상을 일으킬 수 있으며, 뇌진탕의 원인이 되기도 한다. 미국과 일본에서는 contact sports일부에서 마우스가드의 장착이 의무화되어 있으나, 현재 한국에서는 운동 시 마우스가드의 장착을 거의 볼 수 없는 실정이다. 마우스가드는 크게 ready-made type과 custom-made type으로 나눌 수 있다. Ready made type의 마우스가드에는 형태가 일정하고 조정이 곤란한 stock mouthguard와 다소 조정이 가능한 mouth formed mouthguard가 있다 Custom-made type의 마우스가드는 적합성이 뛰어나며 정확한 교합, 하악위를 재현할 수 있다는 장점이 있다. 마우스가드는 입술과 구강연조직을 치아로부터 보호하고, 치아에 가해지는 충격을 분산시켜 파절이나 탈구가능성을 줄여준다. 또한, 악골의 골절과 변위를 방지하고 충격을 흡수한다. 성장기 아동의 경우 치아손상의 30% 정도가 스포츠나 레포츠에 의한 것이라는 보고가 있으며 이 경우 치아나 잇몸은 물론 성장 중인 치조골에 악영향을 주게 된다. 이 때 외상처치는 어려우며, 그 예후 또한 불명확하다. 따라서 성장기 아동의 마우스가드 장착은 외상 예방차원에서 중요하다. 이에 저자는 단국대학교 치과병원에 내원한 환아에게 ERKODEN^(?)사의 ERKOFORM-RVE를 이용한 흡입성형 마우스가드(vacuum type mouthguard)를 적용한 임상경험을 보고하는 바이다. Dentofacial trauma can result in tooth fracture, avulsion, facial bone fracture. The Unites states and Japan mandated the use of mouthguards for contact sports. But, Korean didn't. Mouthguards divided into ready-made type and custom-made type. Mouthguards protect the lips, intraoral soft tissues, teeth and provide the mandible with resilient support to prevent jaw fracture and dislocations. Sports-related accidents have been reported to be one of the most common causes of dentofacial trauma. Sports trauma of involving teeth with incomplete root formation cause long chair time, multiple visit, economic considerations, additional dental services. So, mouthguards can offer considerable protection against sports-related trauma.

현대패션에 대한 감성과 감정의 관계 연구 (제1보)

김유진,이경희 한국의류학회 2003 한국의류학회지 Vol.27 No.3,4

The purpose of this study was to provide the guidance in more objective and proper clothing design reflecting today's consumers' modes in value consumption by identifying the meaning structure and relationship between fashion sensibility and emotion. The stimulus was 54 photos of contemporary costume which represented the Izard' DES. The questionnaire consisted of bi-polar 25 pairs adjective scale of fashion sensibility and the 18 noun scale of emotion was distributed to 970 male and female living in Pusan area. The data were analyzed by Factor analysis, Correlation analysis and Regression analysis using the statistical SPSS package. The major finding of this research were as follows. 1. Fashion sensibilities consist of estheticism, maturity, character and feminity to represent 57.17% total variance. 2. Emotions consist of negative emotion, distress·afraid, arousal, shame and enjoyment to represent factors. 3. For the relation between fashion sensibility and emotion, they showed significant relationship in most of factors.