http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
혼합 결합 등가 π 모델을 이용한 소형 대역통과 필터 설계
윤석(Seok Yoon),김유선(Yu-Seon Kim),배석(Seok Bae),임영석(Yeong-Seong Lim) 대한전자공학회 2022 전자공학회논문지 Vol.59 No.6
본 논문에서는 간략화된 혼합 결합 등가 π 모델을 통하여, 혼합 결합 공진기를 4차 BPF 회로설계에 적용하였다. 제안된 간략화된 등가 모델링은 내부의 결합 계수 및 공진기 특성 등을 포함하여 직병렬 성분으로 분리함으로써, 각 직병렬 성분이 끼치는 영향성에 대하여 분석하였다. 이를 4차 체비셰프 프로토 타입을 갖는 5G Sub-6GHz 대역 통과 필터 설계에 이를 적용하였으며, 각 유형별 통과대역 상한 및 하한 주파수에 높은 주파수 선택도를 가진 필터 설계가 가능하였다. 또한, 통과 대역중심주파수에서 측정된 삽입손실은 4차 평행 결합라인 대역통과 필터에 비해 유형별 각각 1.2 dB, 0.8 dB의 저 손실 특성을 가져올 수 있었으며, 76%의 크기 감소를 이룰 수 있었다. In this paper, a mixed-coupling resonator is applied to the 4<SUP>th</SUP> BPF circuit design through a simplified mixed-coupling equivalent π model. The proposed simplified equivalent modeling analyzed the influence of each series-parallel component by separating it into series-parallel components including the internal coupling coefficient and resonator characteristics. This was applied to the design of a 5G Sub-6GHz BPF with a 4th chebyshev prototype, and it was possible to design a filter with high frequency selectivity for each type of passband upper and lower frequencies. In addition, the insertion loss measured at the center frequency of the passband was able to bring about 1.2 dB and 0.8 dB of low loss characteristics for each type, respectively, compared to the 4<SUP>th</SUP> parallel coupled line BPF, and a size reduction of 76% was achieved.
안중모 ( Jung Mo Ahn ),서용석 ( Yong Seok Seo ),정진우 ( Jin Woo Jung ),이현진 ( Hyeon Jin Lee ),임영석 ( Yeong Seog Lim ) 전남대학교 전자통신기술연구소 2008 전자통신기술논문지 Vol.11 No.1
본 논문은, 개구결합 안테나의 마이크로스트립 선로를 L형태로 변형하였고, 슬롯의 위치는 선로의 끝단으로부터 λg/4 지점에 위치한다. T-Junction으로부터 수직, 수평선로의 길이차이를 λg/4로 하여 원형편파를 얻을 수 있는 X밴드의 소형 마이크로 스트립 안테나를 제안하였다. 제안된 안테나를 HFSS 해석기를 이용하여 해석하였으며, 파라미터 값을 최적화 하였다. 그 결과 반사계수는 -10dB를 기준으로 9.28GHz~10.26GHz까지의 980MHz의 대역폭과 원형 편파에 의한 대역은 350MHz의 대역폭을 갖으며, 최대 이득은 5.09dBi을 얻었다. In this paper, we changed microstrip line of aperture coupled antenna to L type and located slot in λg/4 where its end from the line. We suggested small-sized microstrip antenna of X-band, which can achieved with difference of λg/4 length, between horizon and a perpendicular line from T-junction. The suggested antenna was analyzed by using HFSS analyzer and parameters were optimized. For result reflection coefficient is to 9.28GHz~10.26GHz base -10dB with 980MHz bandwidth and 350MHz bandwidth by circularized polarization, and acquired 5.09dBi of maximum gain.