1997學年度 新入生 實態調査

元俊載,朴州信,鄭永壽 인하대학교 학생생활연구소 1998 學生生活硏究 Vol.18 No.-

한글 프로그램밍 언어 구문에 관한 연구

元裕勳,韓英國 弘益大學校 1982 弘大論叢 Vol.14 No.2

This paper is concerned with the design of Hangul programming language to be PASCAL like, and some of the features from C and ADA language to be included. The Hangul programming language in this paper provides the programmer with a clear, simple, and unified set of concepts in developing algorithms, and with the ease with which a program may be written, tested, and later understood and modified. The concept of structured programming is particularly relevant as background for the study of Hangul language design because of the general emphasis in this paper on the making a language which supports overall structures of good program design and construction. In spite of a postposition of the predicate in Hangul natural language, the syntax of Hangul programming language in this paper is satisfied with LL(l) condition using the modifier. When the variety of types is included in this language, it will be a good programming language.

알루미늄 합금과 고장력 강판 접합을 위한 헬리컬 SPR의 단조공정 설계

김원영, 김동범, 김기호, 김도훈, 이인환, 조해용 충북대학교 산업과학기술연구소 2013 산업과학기술연구 논문집 Vol.27 No.2

A self-piercing rivet(SPR) is a mechanical component for joining dissimilar materials. It is used for joining dissimilar material sheets such as aluminum alloy and steel. The self-piercing rivet directly pierces into sheets without drilling sheets beforehand unlike conventional rivets. However, the self-piercing rivet occurs buckling when piercing high strength steel. Therefore, a helical SPR which can pierce high strength steel sheet was designed. In this study, forging process was designed for manufacturing the helical SPR and simulated by using commercial FEM code DEFORM-3D. In the simulation of forging process for manufacturing rivet, process sequence, formability, forging load were investigated. The suitable forging process could be designed by comparisons of simulated results. Experimental trials have been carried out for same conditions as simulated ones. The simulated results agreed with the experimental ones. So, the analytic approach in this thesis is useful to save cost and time in the forging industry

푸드코디네이터의 역할중요도와 교육과정에 관한 고찰

원융희,원영미 용인대학교 산업경영연구소 2007 산업경영논총 Vol.14 No.-

Nowadays, restaurants pay attention to the factors responding sensitively to the feeling of customers to enhance the competitiveness, since social texture as well as dietary life pattern has been changed from dining-in style to dining-out. Accordingly, dining-out industry began to recognize the importance of the professional food coordinator and even restaurant managers want to receive food coordination training. However, it is true that food coordinators are not in the stable position in their job so far since food coordinator as the type of occupation has not had long history in Korean society. Food coordinator is coordination what the food is many kind of subject and people are satisfied, with their mind that food space is offered by coordinator. Food coordinator base spirit is understanded the other party position and new creation for mind by mind harmony. It exist independent center of specialist for the food that they are lots of kind abundant experience and status table coordinator, food designer, product menu developer, restaurant producer and dietary adviser. It is related with many kind of food specialist, food adviser, catering service, menu development, product development and food merchandising. Due to the above reasons, the necessity of food coordination cannot help but become influential, and the food stylist, a new type of occupation was expected to be rising. In fact, even though everyone has the same recognition that a skilled cook's coordination sense for decorating food in an instant is very important, it is the reality that the coordination sense is not focused. This study tried to establish the food coordinator as the formal type of occupation, through examining closely "recognition degree" of restaurant employees about the importance of the role of professional food coordinators. And this study was considered general food coordinator and Korean, Japan food coordinator of the present condition, development direction. The results of this study are as follows. First, the customers of Korean, western restaurants have deep awareness of professional food coordinator's roles and food coordination training is needed. Second, the coordination training is performed mainly in the university and company education program, all cooks on the spot are anxious to get the food coordination training, and the coordination training is also seriously urgent for them. Afterwards, food world is getting to develop for food coordinator to bright future. Therefore, food coordinator is the exact meaning by this study and it is an opportunity for concerned and understanded many people.

Improvement of Thermoplastic Forming Ability of Ti–Zr–Ni–Cu Metallic Glass by Addition of Sn

Yeong‑Seong Kim,Woo‑Chul Kim,Won‑Tae Kim,Do‑Hyang Kim 대한금속·재료학회 2021 METALS AND MATERIALS International Vol.27 No.6

Ti–Zr–Ni–Cu metallic glass attracts an attention as a precursor of superelastic alloy that can be deformed into nm scalecomplex shapes. However, since the thermal stability of Ti–Zr–Ni–Cu metallic glass in the supercooled liquid region is quitelow, application of thermoplastic forming is limited. Therefore, in the present study, the effect of Sn addition on thermoplasticforming ability of Ti–Zr–Ni–Cu metallic glass has been investigated. Sn containing (Ti35Zr15Ni35Cu15)99Sn1 metallic glassexhibits longer incubation time before onset of crystallization than Ti35Zr15Ni35Cu15metallic glass, resulting in significantimprovement of thermoplastic forming ability. The crystallization behavior changes from three-dimensional growth of saturatednuclei to three-dimensional growth with constant nucleation rate with the addition of Sn. The overall activation energyfor crystallization of (Ti35Zr15Ni35Cu15)99Sn1 metallic glass is higher than that of Ti35Zr15Ni35Cu15metallic glass, indicatingthat the thermal stability of metallic glass is improved by addition of Sn. Because nuclei are continuously generated duringthe crystallization in (Ti35Zr15Ni35Cu15)99Sn1, the average grain size is much smaller than that in Ti35Zr15Ni35Cu15.

1994學年度 新入生 實態調査

鄭永壽,元俊載 仁荷大學校 學生生活硏究所 1995 學生生活硏究 Vol.15 No.-

放射電磁波에 의한 絶緣診斷에 관한 硏究

김영훈,박원주,이동인,김충년,이광식 嶺南大學校 工業技術硏究所 1995 工業技術硏究所論文集 Vol.23 No.1

In this paper, the detect of insulation disorder and process degree of insulation degradation of power apparatus, the waveform of discharge current, magnitude of discharge and frequency spectrum of the electromagnetic wave radiated from partial discharge by simulating with needle-to-plane electrode geometry and dielectric with artificial void, were investigated. The results obtained can be summarized as follows. 1) Streamer pulses occur near the positive cycle and trichel pulses near the peak of negative cycle of applied voltage. At that time, discharge magnitude of trichel pulses and streamer pulses was observed about 200[pC] and 500[pC] in air, respectively. 2) The level and frequency spectrum of radiated electromagnetic waves were increased about 20∼40[dB] at under 200[MHz] and about 2∼3[dB] above 200[MHz], compared with background noises. 3) A sudden change of discharge magnitute above 20∼30[pC] was observed with various applied voltages, but the magnitude showered to tend to saturate at 300∼300[pC] in dielectric. 4) The level and frequency spectrum of radiated electromagnetic waves were increased about 3∼6[dB] under 200[MHz]and about 2∼3[dB] above 200 [MHz], compared with background noises.

蹴球의 System에 對하여

권영원 淸州大學校 1978 論文集 Vol.11 No.2

치과주조용 Ti-Zr-Cr계 합금에서 Cr 함량변화가 부식저항성에 미치는 영향

박영준,강후원,이용렬,송호준,김민강 大韓齒科器材學會 2004 대한치과재료학회지 Vol.31 No.4

The purpose of this study was to develop new dental casting titanium (Ti) alloys having an excellent mechanical properties and good corrosion resistance as a substitute for c.p Ti and Ti-6Al-4V alloy (control groups). Ti-20Cr, Ti-2OZr and Ti-20Zr-XCr (X=2, 5, 10, 15) alloys (experimental groups) were designed for dental casting Ti alloys. Prior to casting prccedure, mother alloys were prepared by using vacuum arc melting with skull melting method. Argon-arc melting and argon/vacuum-pressure casting machine were used for making the specimens. The hardness, microstructure, and corrosion resistance were evaluated by using Vickers microhardness measurement, FE-SEM, and anodic polarization test. The results were as follows: 1. The Vickers microhardness (Hv) of Ti and Ti-6Al-4V alloy showed the values of 210 and 352, and Ti-20Cr and Ti-20Zr alloys showed the values of 341 and 259, respectively. As the Cr content increased from 0 to 15 % in Ti-20Zr-XCr (X=0, 2, 5, 10, 15) alloys, the Hv increased from 259 to 298, 457, 344, and 351, respectively. The microstructure of Ti-20Zr-XCr specimens showed significant difference by the concentration changes of Cr content showing acicular crystalline structure for Ti-20Zr-2Cr and Ti-20Zr-5Cr, and equiaxed crystalline structure for Ti-20Zr-10Cr and Ti-20Zr-15Cr. 2. Open-circuit potentials (E_(∝)) were rapidly decreased followed by steadiness as time elapse in all experimental groups except in Ti-20Z group. Ti-2OZr group showed an increase in E_(∝), from the first. 3. In potentiodynamic anodic polarization tests, all experimental groups showed more noble corrosion potential (E_(corr) than that of Ti-6Al-4V, and more basic E_(corr) than that of Ti. Especially, Ti-20Zr-10Cr alloy showed most favorable corrosion resistance among Ti-Zr-Cr alloys. 4. For Ti-20Zr-10Cr, Ti-20Zr-15Cr, and Ti-20Cr groups, which have more than 10% Cr content, the secondary corrosion potential shifted to noble direction in larger amounts than in the cases of control and other experimental groups. From these results, it was concluded that newly formulated Ti-20Zr-10Cr experimental alloy have adequate hardness and high corrosion resistance, and this alloy is promising candidate for a successful dental casting alloy.

경계요소법에 의한 이종재료 접합 잔류열응력의 해석

유영철,이 원,윤인식,정의섭 韓國非破壞檢査學會 1995 한국비파괴검사학회지 Vol.15 No.4

전자 부품의 일종인 LSI 패키지의 제조 과정에서 절연·방진·방습 등을 목적으로 수지 몰딩이 널리 사용되고 있는데, 냉각과정에서 금속과 수지의 계면에 접합 잔류열응력이 발생하여 파괴의 원인이 되고 있다. 접합 잔류열응력의 측정에는 X선 회절법등이 사용되지만 측정상의 어려움과 계면단 응력특이성에 대한 해석의 곤란함 때문에 적절한 모델링에 따른 수치해석적 연구가 새로이 주목을 받고 있다. 본 연구에서는 Al/Epoxy를 몰딩 접합한 세가지의 대표적인 계면 형상을 선정하여 계면에서의 잔류열응력을 경계요소 수치 해석 및 스트레인 게이지를 이용한 실험을 통하여 각각 해석하였다. 수치해석과 실험결과는 정상적으로 잘 일치하였으며, 서브 요소를 사용하므로써 계면단 응력 특이성의 해석 정밀도를 향상시킬 수 있었다. 또한 접합 잔류열응력의 해석결과로부터 수직응력에 의한 계면 박리가 예상되고, 피착체의 두께가 증가할수록 응력 특이성이 강하게 나타남을 확인하였다. In general residual stress is measured by X-ray diffraction method but in case of bonding residual thermal stress it is inadequate technique to examine the stress singularity. Therefore Two-dimensional elastic boundary element analyses were carried out to investigate the residual thermal stress and stress singularity of bonding interface in Al/Epoxy. This boundary element results were compared with the strain gauge measurements. The effects of different interface models, sub-elements and adherend thickness are presented and discussed. On the basis of the obtained results, interface delamination causing by normal stress is expected and stress singularity is observed more intensively increasing with adherend thickness. It is concluded that the bonding strength of Al/Epoxy interface can be estimated correctly by taking into account the stress singularity at the edge of the interface.