콩에서 발생하는 강낭콩일반모자이크바이러스(BCMV)와 땅콩위축바이러스(PSV)의 저항성 평가

이영훈, 윤영남, 강범규, 김현영, 최만수, 구성철, 김현태, 윤홍태, 이수헌, 백인열 忠北大學校 農業科學硏究所 2014 農業科學硏究 Vol.30 No.2

It has been reported several viral diseases in soybean. The occurrence of Bean common mosaic virus and Peanut stunt virus are able to induce severe problem because the main breeding target for viral disease was focused on Soybean mosaic virus. BCMV is a spcies of the genus Potyvirus of the family Potyviridae. BCMV reduces yield by as much as 80% and also adversely affects seed quality in common bean. BCMV has a worldwide distribution because of its high rates 35% of transmission via seeds produced by plants systemically infected prior to bloom. PSV is a species of the genus Cucumovirus of the family Bromoviridae. PSV has been reported to be economically damaging on beans worldwide. Although the virus is reportedly seed transmissible at very low rates, infected plants rarely produce pods with normal viable seeds. The most satisfactory management method of viral diseases such as BCMV and PSV is the use of resistant cultivars and healthy seed. For the overcome of genetic resistance by new virus such as BCMV and PSV, virus diseases monitoring and researches need to study deeply and continually. In this study, we conducted the resistance screen on BCMV and PSV for selection of resistance cultivars. We inoculated on 128 cultivars with PSV and BCMV respectively. These cultivars were classified through pathogenic response such as resistance, necrosis and susceptibility. In addition, 99 and 66 resistant cultivars were confirmed against PSV and BCMV respectively.

다발성 골수종에서 저용량 thalidomide, cyclophosphamide, dexamethasone (TCD) 요법의 효과

류충헌,정재현,고정해,장제혁,박영진,최규남,박봉수,이상민,주영돈 인제대학교 2008 仁濟醫學 Vol.29 No.-

Background and Objectives : The immunomodulatory drug thalidomide can inhibit angiogenesis and induce apoptosis in experimental models. It can also induce marked and durable response in newly diagnosed myeloma patients. Thalidomide has been used at doses ranging from 200 to 800 mg with significant toxicity. No data are available on the impact of low-dose thalidomide, cyclophosphamide and dexamethasone as initial therapy for myeloma patients. Design and Methods : To address this issue, newly diagnosed myeloma patients were treated with 50 mg/day thalidomide continuously and cyclophosphamide 150 mg/m², days 1-4 and dexamethasone 20 mg/m², days 1-5 and day 15-19, every month. Between October 2005 and October 2006, 14 patients (median age 54.5 years) were treated with low-dose thalidomide, cyclophosphamide and dexamethasone. Results : After a minimum of two cycles of treatment, 5 patients (55.5%) showed a partial remission. After four cycles of treatment, 10 patients (83.3%) showed a partial remission (n=6) and complete remission (n=4). After a median follow-up of 15.4 months, 1 year overall survival rate was 82.0%. Thalidomide was well tolerated without serious toxic effects. Conclusions : The combination of low-dose thalidomide, cyclophosphamide and dexamethasone demonstrates favorable response rate and 1 year overall survival rate in newly diagnosed myeloma. Severe toxicities were not seen with this combination.

Dentacolor Resin System의 물성에 관한 연구

정재헌,고영무 대한치과기재학회 1996 대한치과재료학회지 Vol.23 No.1

The aim of this study was to evaluate the physical properties on Dentacolor resin system. Fifteen specimens(20mm in diameter, 1mm in height) of Dentacolor resin were prepared according to American Dental Association Specification No.27 and the color parameters of L*, a*, b* were measured with a computerized colorimeter(Hunter Associated Laboratory Inc., USA) in the transmittance mode. To measre the amount of water sorption and solubility, fifteen specimens were immersed in distilled water at 37±1℃ and then stored extended up to 20 weeks. Microhardness test were made on fifteen Dentacolor resin specimens using microhardness tester(Shimadzu, Japan) at a cross head speed 50μm/sec., loading time of fifteen seconds, and 50gm of load applied. To measure the shear bond strength between Dentacolor resin and three kinds of dental casting alloys, that is, Neocast 4(Au alloy), Novopal 3(Ag-Pd alloy), and Verabond(Ni-Cr alloy), fifteen specimens were cast into square paddles(15 mm ×15 mm ×1mm) according to the manufacturer's recommendation. Fifteen specimens were prepared in cylindric molds(6mm in height, 3mm in diameter) for the compressive strength measurements. Fifteen specimens were prepared in cylindric molds(3mm in diameter) for the compressive strength Measurements. Fifteen specimens were prepared in cylindric molds(3mm in height, 6mm in diameter) for the diametral tensile strength measurements. The specimens were tested on a universal testing machine(Model No. AGS 110-A, Shimadzu, Japan) at a crosshead speed of 0.1 inch/min, for the shear bond strength, compressive strength and diametral tensile strength. The abtained results were as follows: 1. Dentacolor resin system showed significant total color change(△E value:3.641 ±1.278) after 16 weeks and the range of total color change(△E) of that was between 0.5∼3.641 for 20 weeks. 2. The amount of water sorption of Dentacolor resin system for 1 week was 0.30±0.119mg/㎠, and the amount of mean water sorption was 0.36mg/㎠ for 20 weeks. 3. The amount of solubility of Dentacolor resin system for 1 week was 0.060 ±0.018mg/㎠, and the amount of mean water sorption was 0.044mg/㎠ for 20 weeks. 4. The shear bond strength between Dentacolor resin system and Neocast 4, Novopal 3, and Verabond were 21.029 ±3.743 MPa, 20.242 ±2.548 MPa, and 19.889±4.032 MPa and the differences of shear bond strength of Dentacolor resin system according the kinds of alloys were showed significantly(p<0.05). 5. The compressive strength of Dentacolor resin system was 116.15 ±23.02 MPa, and Diametral tensile strength of that was 48.59 ±5.95 MPa. 6. The microhardness value(V.H.N.) of Dentacolor resin system was 35.28 ±2.53 after specimens were made immediately, and that was 33.15 ±2.15 after 20 weeks. The results of microhardness value showed decrease as elapsed of time, but the differences of that were not significant as a function of time(p>0.05).

土壞 및 植物體 중 窒酸態 窒素 簡易測定 方法 探索

鄭英祥,梁在義,韓連奎,崔文憲 江原大學校 附設 環境硏究所 1996 環境硏究 Vol.13 No.-

Feasibility of simple rapid methods to determine nitrate concentration in soil and plant sap in siltu was assessed using Merckoquant strip method and Cardy NO_(3)- sensor. The saturated extract of a soil was sampled readily in field by a simple apparatus which consists of a syringe, a vial and a hand vacuum pump with a vacuum valve. The simple measurement methods for saturated extract were tested for soil samples obtained from the thirty three farm vinyl houses around Chuncheon, Kang-weon-Do and Kuri, Kyeonggi-Do. The methods were tested for soil and plant sap samples grown under different fertilization in a vinyl house at Kangweon National University. The main treatments were with or without organic fertilizer, and subtreatments were four nitrogen levels ; 0, 100, 200 and 400kg/ha for lettuce and 0, 150, 300 and 500k9/ha for cucumber. The Cardy sensor method showed a high confidence for soil and plant sap nitrate measurement. The Merckoquant strip method was also reliable, but checking electrical conductivity was recommended for better reliability. The soil nitrate concentration above 10mmo1/L was not desirable for lettuce yield, and 15mmo1/L for cucumber. The respective electrical conductivities of saturated extracts were 3 to 4ds/m at these concentrations. The soil nitrate concentration could be monitored by Amberlite IRN-150 Resin-bag. A good correlation was obtained between the soil nitrate concentration and the nitrate absorbed by the resin bag. Therefore, use of the resin bag could be recommended to monitor nitrate in soil, minimizing soil destruction.

티타늄 상에 강유전성 barium titanate 박막 형성과 분극처리에 의한 유사체액 내에서의 calcium phosphate 생성 증진

박영준,이용렬,황규석,김은주,임용무,이기헌 대한치과기재학회 2001 대한치과재료학회지 Vol.28 No.2

This study was performed to fabricate a ferroelectric barium titanate (BaTiO₃, BTO) thin film on Ti substrate and to evaluate the effect of poling treatment for the improvement of calcium phosphate (Ca-P) formation. BTO thin-film was spin-coated on Ti substrate by dipping-pyrolysis technique using coating sol obtained by mixing Ba-naphthenate and Ti-naphthenate as starting substances. Pre-heating temperature of the BTO thin film was performed at 500℃ because organic-solvent was completely volatilized without any crystal growth, and the final heat treatment was performed at 600, 650, 700, 750, 800, 850℃, respectively. By repeating the coating and pre-heating procedure gor 20 times, homogeneous thin film of 0.7㎛ thickness could be fabricated, and it performed well during the poling treatment without breakdown. The final heating treatment of the BTO thin film at 750℃ produced a homogeneous crystalline structure without heterogeneous TiO₂formation, which was confirmed by field emission scanning electron microscope (FE-SEM) and X-ray diffraction analyser (XRD). An average grain size of 20∼30 ㎚ were confirmed by SEM observation. The final heat-treated BTO thin-films were polarized (Ep = 5 V/㎛) from 160℃ to 25℃ in heating chamber for 2 h. The negatively poled BTO thin film (N-BTO), non-poled BTO thin film (BTO), Ti substrate (Ti), and 600℃ heat-treated Ti (Ti-O) were immersed in SBF and Eagle's MEM solution for 15 days at 37℃. After the immersion period, the morphological and compositional changes of the surfaces were investigated using a FE-SEM and an energy dispersive X-ray spectrometer (EDX). After immersion in simulated body fluid (SBF), sodium chloride (Nacl) crystals were formed on Ti, Ti-O, and BTO surfaces due to anion adsorption (Cl), while Ca-P crystals were formed on N-BTO surfaces. We assumed that rapidly adsorded cations (Ca²□ ions) on the negatively charged surface at the initial stage acted as nuclei for the formation of Ca-P crystals. In MEM, sodium chloride (NaCl) was formed on Ti, and Ca-P layer including NaCl was formed on Ti-O. Weak and sparse Ca-P layers were formed on BTO, while thick, homogeneous, and dense Ca-P layer was formed on N-BTO, which was confirmed by FE-SEM and EDX. These results demonstrated that introducing a N-BTO on Ti is an effective method for the improvement of Ca-P formation in SBF and MEM. In conclusion, negatively charged ferroelectric BTO thin-film on Ti would improve the possibility of implant osseointegration.

Dentacolor Resin System의 색안정성 및 물흡수도에 관한 연구

고영무,정재헌,최유석 大韓齒科器材學會 1995 대한치과재료학회지 Vol.22 No.2

The purpose of this study was to measure the color stability and water sorption of Dentacolor resin system at various time intervals over 6 week period. Ten, 20 x 1mm discs of the resin specimen were prepared according to ADA specification No.27 and cured with a photo-polymerization equipment(Dentacolor XS and Unilux AC). The color parameters of L*, a*, b* were measured with a computerized colorimeter(Hunter Associates Laboratory Inc., USA) in the transmittance mode. The total color change(ΔE) occurred during two different time periods was calculated using the following equation: ?? The amount of water sorption measurements was done in accordance with ADA specification No.27 for one week in distilled water at 37 ±1℃ and then stored extended up to 6 weeks. The obtained results were as follows : l. At first week, total color difference(ΔE) value of Dentacolor resin system was 1.430 ±0.664. 2. It was found that the range of total color difference(ΔE) of Dentacolor resin system was between 0.5∼1.430 for 6 weeks. 3, The amount of water sorption for one week was 0.30 ±0.119mg/cm²and it was lower than the 0.7mg/cm²/week for type Ⅱ composites in ADA specification No.27. 4. The amount of water sorption of Dentacolor resin system after 6 weeks was much more than its amount of water sorption of the first week, but it was not significant difference(p>0.05).

대호 간척기 토양의 염농도별 밭작물의 염해 평가

이승헌,류순호,설수일,안열,정영상,이상모 江原大學校 附設 環境硏究所 2001 環境硏究 Vol.18 No.-

This study was carried out to obtain the basic data for selecting the applicable crops in reclaimed land during desalinization period. A pot experiment was conducted with 5 different electrical conductivities of the saturated extracts (ECe 1, 3, 9, 14, and 16 dS·m^(-1)) of soils taken from the Dae-Ho reclaimed tidal lands. Eight crops (Chinese cabbage, radish, tomato, red pepper, buckwheat, soybean, sesame, and green perilla) were grown for 37days. Plant height and number of leaves were surveyed on 2 and 4 weeks after seeding, and on harvest time (5 weeks). After harvest, dry weights of harvested crops were measured and soil chemical properties were analyzed. Emergence rates of crops were comparatively high except sesame. For sesame, there was no emergence at ECe over 3 dS·m^(-1). Growth and dry weight decreased significantly as increasing ECe. The ECe which decreased 50% of dry weight index were 14.2 dS·m^(-1) for radish, 11.4 dS·m^(-1) for Chinese cabbage, 10.2 dS·m^(-1) for tomato for red pepper, 8.9 dS·m^(-1) for buckwheat and green perilla, 8.6 dS·m^(-1) for soybean, and 8.9 dS·m^(-1) for tomato. At higher ECe that start the growth inhibition, increasing 1 dS·m^(-1) in ECe, 7.7, 6.5, 5.9, 5.6, 5.2, and 4.9% of dry weight decreased for buckwheat, green perilla, Chinese cabbage, radish, soybean, and tomato (red pepper), respectively. The critical value of ECe for crop survival except sesame was 15.4~23.1 dS·m^(-1).

치과용 자성재의 안정성 개선에 관한 연구 : I. 치과용 자성재의 전기화학적 부식에 대한 스퍼터링 도금의 효과 I. Effects of Sputtered Film Deposition on the Electrochemical Corrosion of Dental Magnetic Materials

고영무,최한철,정재헌,정효수,최성욱 대한치과기재학회 1999 대한치과재료학회지 Vol.26 No.4

In order to investigate the various properties of dental magnetic materials studies on corrosion behavior, decreasing rate of magnetic flux density, amount of elements released, mean average surface roughness values and the changing of mean surface microhardness values for dental application were done. To increasing the corrosion resistance of dental magnetic materials, surfaces of Sm-Co and Nd-Fe-B based magnetic materials were plated with gold(Au), platinum(Pt), titanium(Ti), chromium(Cr) and cobalt(Co), and then electrochemical corrosion test were performed in 4 kinds of electrolyte solution(0.9% NaCl, 1% lactic acid, 0.05% HCl and modified Fusayama's artificial saliva). The results were as follows: 1. In Sm-Co and Nd-Fe-B based magnetic materials, the pitting corrosion of experimental group was higher than that of the control group, the experimental group was less corrosive than control hroup. 2. The amount of elements released from experimental group was more significantly decreased than that of control group. 3. Decreasing rate of magnetic flux density of experimental groups was significantly lower than that of control group after corrosion test. 4. The mean average surface roughness value of one(Sm-Co based magnetic materials not plated) of the control group was much increased in modified Fusayama's artificial saliva after first corrosion but that of the other(Nd-Fe-B based magnetic materials not plated) was much increased in 0.05% HCl solution. 5. The decreasing rate of surface microhardness values of experimental groups were lower than that of control group after corrosion, 6. Intergranular corrosion started first from the grain boundary of the control group and they advanced gradually to general corrosion, and the pitting corrosion occurred locally at area of existing pits in experimental group.

RT-LAMP를 이용한 콩황화일반모자이크바이러스의 진단

배대현, 이영훈, 김봉섭, 윤영남, 강범규, 최만수, 구성철, 김현태, 윤홍태, 이수헌, 백인열 忠北大學校 農業科學硏究所 2014 農業科學硏究 Vol.30 No.2

Soybean yellow common mosaic virus (SYCMV) has been recently reported, it has been occurred a lot with Soybean mosaic virus (SMV) and Soybean yellow mottle mosaic virus (SYMMV) in soybean field. SYCMV belongs to genus of Sobemovirus and induced viral symptoms with yellowing, mottle and mosaic. A reverse transcription loop-mediated isothermal amplification (RT-LAMP) method allowed one-step detection of gene amplification by simple procedure and needed only a simple incubator for isothermal template. This RT-LAMP method allowed direct detection of RNA from virus-infected plants without thermal cycling and gel electrophoresis. In this study, we designed RT-LAMP primers named SYCML-F3/B3/FIP/BIP from coat protein gene sequence of SYCMV. After the reaction of RTLAMP, products were identified by electrophoresis and with the detective fluorescent dye, SYBR Green I. under daylight and UV light. Optimal reaction condition was at 63 for 60min and the primers of RTLAMP showed the specificity for only SYCMV tested in this study.

치과용 자성 어태치먼트 재료의 안정성 개선에 관한 연구 : II.질화티타늄 코팅이 치과용 자성재의 내식성에 미치는 영향 Ⅱ.Effect of TiN Coating on Corrosion Resistance of Dental Magnetic Materials

최한철,고영무,정재헌,신종연,김일선,최성욱,정효수 대한치과기재학회 1999 대한치과재료학회지 Vol.26 No.4

Dental magnetic materials have been applied to removable prosthetic appliances, maxillofacial prostheses, obturator and dental implant but they still have some problems such as low corrosion resistance in oral environments. To increase the corrosion resistance of dental magnetic materials, surfaces of Sm-Co and Nd-Fe-B based magnetic materials were plated with TiN and then electrochemical corrosion test were performed in 4 kinds of electrolyte solutions(0.9% NaCl. 1% lactic acid, 0.05% HCl and modified Fusayama's artificial saliva). From this study, corrosion behavior, amount of elements released, mean average surface roughness values and the changing of mean surface microhardness values were measured comparing with control group of non-sputtered plating magnetic materials. The results were as follows: 1. TiN layer coated on magnet grows into preferred direction with lamellar structure and its thickness is 3.0㎛. 2. Sm-Co base magnetic materials coated with TiN have good corrosion resistance in 1% lactic acid and their pitting corrosion can not be seen. 3. Nd-Fe-B base magnetic materials coated with TiN showed good tendency of corrosion resistance in 0.05% HCl solution. 4. The amount of elements released from both Sm-Co and Nd-Fe-B base magnetic materials coated with TiN were more significantly decreased than that of uncoated magnetic materials. 5. The mean surface roughness values of both Sm-Co and Nd-Fe-B base magnetic materials coated with TiN were smooth than that of uncoated magnetic materials after corrosion test. 6. The decreasing rate of microhardness of both Sm-Co and Nd-Fe-B base magnetic materials coated with TiN were lower than that of uncoated magnetic materials after corrosion test. 7. Dental magnetic materials coated with TiN produced various corrosion products such as TiO, TiO₂, Ti₂O₃on the surface and resulted in better corrosion resistance than uncoated magnetic materials. In conclusion, it is considered that the corrosion problem of dental magnetic materials could be solved to some extent by EB-PVD with TiN on the surface of dental magnetic materials.