돼지 卵子의 透明帶에 대한 單一클론抗體生産과 그 特性에 關한 硏究

金鐘培,劉永春,金昌圭,權五中,鄭盛元,鄭吉生 건국대학교 동물자원연구센터 1991 動物資源硏究誌 Vol.16 No.-

本 試驗은 單一클론抗體의 강한 特異性과 抗體性質의 不變性을 이용하여 發生學的 側面에서 哺乳動物 卵子의 透明帶의 機能과 構造를 이해하고, 또한 種特異的인 精子 受容體의 存在 및 生化學的 構造를 규명하기 위한 기초연구로서, 돼지 卵子의 透明帶를 免疫原으로 하여 BABL/c 생쥐로부터 單一클론抗體를 생산하고 그 특성을 구명하였던 바 다음과 같은 결과를 얻었다. 1) 3마리의 BABL/c 생쥐(YⅠ, YⅡ, ZI)에 돼지卵子의 透明帶를 免疫化하고, 複合抗體 生成을 확인한 후 생쥐의 脾臟細胞와 Myeloma(SP2/O-Ag14)를 polyethylene glycol를 融合을 실시한 결과 각각 25.8%, 54.5% 그리고 59.7%의 融合效率을 나타내었으며, ELISQ에 의해 陽性反應을 조사한 결과 각각 17.3%, 32.6% 그리고 6.2% 陽性反應 效率을 나타내었다. 2) YI에서 강한 陽性反應을 보인 6개의 well에 대한 cloning을 실시하고 抗體檢證을 행한 결과 20.8% ∼ 48.4%의 Cloning效率과 54.6% ∼ 82%의 陽性反應 效率을 나타내었다. 3) 강한 陽性反應을 나타낸 항체에 대해 sandwich ELISA法에 의해 isotype을 決定하였던바 2E93C(YⅠ), 3E83E7(YⅠ), 4E3(YⅡ)각각 IgG₂b, IgG₂a, IgM으로 확인되었다. 4) Isotype이 決定된 2E93C9(YⅠ), 3E84E7(YⅠ), 4E3(YⅡ)의 세포를 생쥐의 腹腔에 주사하여 얻은 腹水를 indirect ELISA法에 의해 titer를 決定한 결과 모두 1:400,000 이상의 높은 titer를 나타내었다. 5) 處理區로서 單一클론抗體의 腹水와 對照區로서 normal mouse serum이 각각 2%씩 함유된 배양액속에서 난자를 배양한 후 顯徵鏡下에서 관찰했을 때 對照區에서 배양된 난자의 표면은 정상적인 형태를 나타냈으나 處理區에서 배양된 卵子는 표면에 뚜렷한 沈澱層을 형성하였다. 6) 處理區와 對照區 卵子를 Rabbit anti-mouse IgG-FITC가 1% 함유된 배양액속에서 배양하고 洗滌한 후 螢光顯徵鏡下에서 관찰한 바 處理區의 卵子는 透明帶 주위에서 螢光이 나타났으나, 對照區에서는 나타나지 않았다. This study was carried out ot produce and characterize monoclonal antibodies against porcine zona pellucida, and undertaken as a basic study to develop immunocontraceptive vaccine and to investigate the function of zana pellucida in early fertilization process. The results obtained were summarized as follows: 1. Spleen cells of three BALB/C mice(YⅠ, YⅡ and ZI) which were immunized with porcine zona pelucida were fused with myeloma cells(SP2/O-Ag14) by polyethylene glycol. At the result of fusion, fusion efficiency was 25.8 , 54.5% and 59.7% and positive efficiency 17.3%, 32.6% and 6.2%, respectively. 2. Cloning efficiency was shown to be from 20.8% to 48.4% and positive efficiency of them were 54.6% to 82%. 3. Sub-isotypes of three strong positive antibodies, 2E93C(YⅠ), 3E83E7(YⅠ) and 4E3(YⅡ) were determined by sandwich ELISA method and shown to be as IgG2b, IgH2a and IgM, respectively. 4. The titers of three ascitic fluids containing antibodies, 2E93C9(YⅠ), 3E84E7(YⅠ) and 4E3(YⅡ) were determined by indirect ELISA and all of them showed above 1:400,000. 5. The layer of precipitate was observed on the zona incubated with medium containing 2% ascitic fluid of monoclonal antibody while the eggs treated with 2% normal mouse serum did not. 6. Porcine eggs incubated with medium containing 2% ascitic fluid of monoclonal antibody and followed by subsequent incubation with Rabbit anti-mouse IgG-FITC conjugate showed strong fluorescent light on the zona surface while the zona of normal mouse serum-treated eggs did not show fluorescence.

Effects of Y₂O₃ additions on the oxygen diffusion in top-seeded melt growth processed YBa₂Cu₃O_7-y superconductors

Jun, B.H.,Jung, S.A.,Park, S.D.,Park, B.J.,Han, Y.H.,Kim, C.J. North-Holland 2011 Physica. C, Superconductivity Vol.471 No.21

To understand the effect of Y<SUB>2</SUB>BaCuO<SUB>5</SUB> (Y211)/YBa<SUB>2</SUB>Cu<SUB>3</SUB>O<SUB>7-y</SUB> (Y123) interfaces on the oxygen diffusion in single grain YBa<SUB>2</SUB>Cu<SUB>3</SUB>O<SUB>7-y</SUB> superconductors, single grain Y123 superconductors with 0.05 and 0.3moles of Y<SUB>2</SUB>O<SUB>3</SUB> additions were fabricated by a top-seeded melt growth (TSMG) process. Y123 compacts with Y<SUB>2</SUB>O<SUB>3</SUB> additions were subjected to melt growth heating cycles with a cooling rate of 1<SUP>o</SUP>C/h through a peritectic temperature (1015<SUP>o</SUP>C) and then annealed at 450<SUP>o</SUP>C for 200h in flowing oxygen. The superconducting temperature (T<SUB>c</SUB>) and critical current density (J<SUB>c</SUB>) were estimated for the three different regions (top surface (s), intermediate (i) and center (c)) of samples. The amount of Y211/Y123 interface area in single grain Y123 superconductors was successfully controlled by Y<SUB>2</SUB>O<SUB>3</SUB> additions. The T<SUB>c</SUB> values of s regions were higher than those of i and c regions, which indicates the presence of more oxygen at the sample surfaces. In addition, the T<SUB>c</SUB> values of i and c regions of the Y123 sample with 0.3mole Y<SUB>2</SUB>O<SUB>3</SUB> addition were higher than those of the same regions of the Y123 sample with 0.05mole Y<SUB>2</SUB>O<SUB>3</SUB> addition due to the promoted oxygen diffusion through Y211/Y123 interfaces and other related defects. In spite of the promoted oxygen diffusion by Y<SUB>2</SUB>O<SUB>3</SUB> addition, the large T<SUB>c</SUB> difference among the regions still existed, which suggests sluggish oxygen diffusion into single Y123 grains.

200 GeV/핵자 유황이온과 핵건판핵의 충돌에 의해 생성된 헬륨 파쇄핵의 극한파쇄 연구

김동철,송진섭,윤천실,정성헌,박인곤,김종오,김철수,김태연,이승희,조재희,천병구,김재률,김준원,김태익,박명렬,장한일,임인택 慶尙大學校 기초과학연구소 1992 基礎科學硏究所報 Vol.8 No.-

고에너지 중이온 원자핵과 핵건판의 충돌에서, 200GeV/핵자 유황이온에 의해 생성된 파쇄 헬륨핵(Z=2)의 실험실계의 방출각 분포는 표적핵에 무관한 회귀공식. dN=exp[a+k exp(η-y_b)]d[exp(η-y_b)]로 잘 표현된다. 여기에서 의사신속도 η=-ln[tan(θ/2)]이고, y_b는 실험실계의 입사입자(^32S)의 신속도이다. 이 공식에 의한 적합에서 k=-0.057±0.008로 얻어진다. 즉, 핵건판과 고에너지 중이온의 충돌에서 파쇄 헬륨핵의 exp(η-y_b)의 분포는 "극한파쇄" 현상을 잘 설명하고 있다. The angular distribution of emission angle θ of helium (Z=2) produced in the collisions of incident particles of 200 GeV/nucleon ^32S in nuclear emulsion is well expressed by dN=exp[a+k exp(η-y_b)]d[exp(η-y_b)] where the pseudorapidity is η=-ln[tan(θ/2)], the laboratory system primary rapidity is y_b, and k=-0.057+0.008. The shape of this frequency of occurrence distributions in terms of exp(η-y_b) attests to the validity of the concept of "limiting fragmentation" for helium projectile fragments produced in the projectile fragmentation regions of heavy ion collisions in nuclear emulsion.

Mechanical properties of (W,Ti)C and (W,Ti)C-NiAl₃ cermet consolidated by the high-frequency induction-heating method

Kim, W.,Suh, C.Y.,Roh, K.M.,Cho, S.W.,Na, K.I.,Shon, I.J. Elsevier Sequoia 2013 Journal of alloys and compounds Vol.568 No.-

In the case of cemented (W,Ti)C, Co is added as a binder for the formation of composite structures. However, the high cost of Co and the low corrosion resistance of the (W,Ti)C-Co cermet have generated interest in recent years for alternative binder phases. In this study, NiAl<SUB>3</SUB> was used as a binder and consolidated by the high-frequency induction heated sintering (HFIHS) method. The densification of both monolithic (W,Ti)C and (W,Ti)C-NiAl<SUB>3</SUB> cermet was accomplished within 3min. Highly dense (W,Ti)C and (W,Ti)C-NiAl<SUB>3</SUB> with a relative density of upto 99% were obtained within 3min by HFIHS under a pressure of 80MPa. The method was found to enable not only the rapid densification but also the prohibition of grain growth preserving the nano-scale microstructure. The average grain sizes of the sintered (W,Ti)C and (W,Ti)C-NiAl<SUB>3</SUB> were lower than 100nm. The addition of NiAl<SUB>3</SUB> to (W,Ti)C enhanced the toughness at the expense of the slight decrease in hardness. The hardness of (W,Ti)C and (W,Ti)C-NiAl<SUB>3</SUB> was significantly higher than that of (W,Ti)C-Co or (W,Ti)C-Ni. The fracture toughness and hardness values of (W,Ti)C, (W,Ti)C-5vol.%NiAl<SUB>3</SUB>, and (W,Ti)C-10vol.%NiAl<SUB>3</SUB> consolidated by HFIHS with a pressure of 80MPa and a induced current were 7.6+/-0.4MPam<SUP>½</SUP> and 2850+/-35kg/mm<SUP>2</SUP>, 8.5+/-0.3MPam<SUP>½</SUP> and 2610+/-37kg/mm<SUP>2</SUP>, 9.7+/-0.5MPam<SUP>½</SUP> and 2520+/-26kg/mm<SUP>2</SUP>, respectively.

TmSR-C, scavenger receptor class C, plays a pivotal role in antifungal and antibacterial immunity in the coleopteran insect Tenebrio molitor

Kim, S.G.,Jo, Y.H.,Seong, J.H.,Park, K.B.,Noh, M.Y.,Cho, J.H.,Ko, H.J.,Kim, C.E.,Tindwa, H.,Patnaik, B.B.,Bang, I.S.,Lee, Y.S.,Han, Y.S. Pergamon Press ; Elsevier Science Ltd 2017 Insect biochemistry and molecular biology Vol.89 No.-

Scavenger receptors (SRs) constitute a family of membrane-bound receptors that bind to multiple ligands. The SR family of proteins is involved in removing cellular debris, oxidized low-density lipoproteins, and pathogens. Specifically, class C scavenger receptors (SR-C) have also been reported to be involved in phagocytosis of gram-positive and -negative bacteria in Drosophila and viruses in shrimp. However, reports are unavailable regarding the role of SR-C in antifungal immune mechanisms in insects. In this study, a full-length Tenebrio molitor SR-C (TmSR-C) sequence was obtained by 5'- and 3'-Rapid amplification of cDNA ends-polymerase chain reaction (RACE-PCR). The TmSR-C full-length cDNA comprised 1671 bp with 5'- and 3'-untranslated regions of 23- and 107-bp, respectively. TmSR-C encodes a putative protein of 556 amino acid residues that is constitutively expressed in all tissues of late instar larvae and 2-day-old adults, with the highest transcript levels observed in hemocytes of larvae and adults. TmSR-C mRNA showed a 2.5-fold and 3-fold increase at 24 and 6 h after infection with Candida albicans and β-glucan, respectively. Immunoassay with TmSR-C polyclonal antibody showed induction of the putative protein in the cytosols of hemocytes at 3 h after inoculation of C. albicans. RNA interference (RNAi)-based gene silencing and phagocytosis assays were used to understand the role of TmSR-C in antifungal immunity. Silencing of TmSR-C transcripts reduced the survivability of late instar larvae at 2 days post-inoculation of C. albicans, Escherichia coli, or Staphylococcus aureus. Furthermore, in TmSR-C-silenced larvae, there was a decline in the rate of microorganism phagocytosis. Taken together, results of this study suggest that TmSR-C plays a pivotal role in phagocytosing not only fungi but also gram-negative and -positive bacteria in T. molitor.

Ex-situ catalytic pyrolysis of citrus fruit peels over mesoporous MFI and Al-MCM-41

Kim, Y.M.,Jae, J.,Lee, H.W.,Han, T.U.,Lee, H.,Park, S.H.,Kim, S.,Watanabe, C.,Park, Y.K. Pergamon ; Elsevier Science Ltd 2016 Energy conversion and management Vol.125 No.-

The thermal and ex-situ catalytic pyrolysis of different citrus peels, Citrus paradisi peel, Citrus sinensis peel, Citrus unshiu peel, and Citrus limon peel, were studied by thermogravimetric, evolved gas analysis-mass spectrometry and tandem micro-reactor-gas chromatograph/mass spectrometry analyses. Kinetic analysis revealed more complicated reaction steps and a wider range of activation energies of citrus peels than those of wood powder due to the presence of pectin in the citrus peels. Large amounts of methanol formation from each citrus peel were also recorded by evolved gas analysis-mass spectrometry and fast pyrolysis-gas chromatograph/mass spectrometry analyses at the main decomposition temperature of pectin, between 150 and 250<SUP>o</SUP>C. Mesoporous MFI was found to be a more effective catalyst for the production of mono aromatic compounds (benzene, toluene, ethylbenzene, and xylene; 3.06-4.17C%) and light olefins (ethene, propene, butene, and butadiene; 8.13-9.13C%) than Al-MCM-41 (mono aromatic compounds 0.67-0.93C% and light olefins 3.61-4.58C%) because of its higher catalytic activity in deoxygenation and aromatization due to the stronger acidity of mesoporous MFI. The yield of mono aromatic compounds over mesoporous MFI was highest from C. paradisi peel (4.17C%), followed in order by C. sinensis peel (3.83C%), C. unshiu peel (3.61C%), and C. limon peel (3.06C%), due mainly to the different contents and properties of pectin in each citrus peel. The higher activities of mesoporous MFI than Al-MCM-41 were also maintained during the 7 times sequential catalytic pyrolysis of C. paradisi peel, demonstrating the stability of mesoporous MFI catalyst.

T_c and J_c distribution in in situ processed MgB₂ bulk superconductors with/without C doping

Kim, C.J.,Kim, Y.J.,Lim, C.Y.,Jun, B.H.,Park, S.D.,Choo, K.N. The Korea Institute of Applied Superconductivity a 2014 한국초전도저온공학회논문지 Vol.16 No.2

Temperature dependence of magnetic moment (m-T) and the magnetization (M-H) at 5 K and 20 K of the in situ processed $MgB_2$ bulk pellets with/without carbon (C) doping were examined. The superconducting critical temperature ($T_c$), the superconducting transition width (${\delta}T$) and the critical current density ($J_c$) were estimated for ten test samples taken from the $MgB_2$ bulk pellets. The reliable m-T characteristics associated with the uniform $MgB_2$ formation were obtained for both $MgB_2$ pellets. The $T_cs$ and ${\delta}Ts$ of all test samples of the undoped $MgB_2$ were the same each other as 37.5 K and 1.5 K, respectively. The $T_cs$ and ${\delta}Ts$ of the C-doped $MgB_2$ were 36.5 K and 2.5 K, respectively. Unlike the m-T characteristics, there existed the difference among the M-H curves of the test samples, which might be caused by the microstructure variation. In spite of the slight $T_c$ decrease, the C doping was effective in enhancing the $J_c$ at 5 K.

Effects of calcium doping on the superconducting properties of top-seeded melt growth processed Y_1.5Ba_2-xCa_xCu₃O_y superconductors

Park, S.D.,Kim, H.J.,Park, B.J.,Han, Y.H.,Jun, B.H.,Lee, J.S.,Kim, C.J. North-Holland 2011 Physica. C, Superconductivity Vol.471 No.21

The effect of calcium doping on the superconducting properties of top seeded melt growth (TSMG) processed Y<SUB>1.5</SUB>Ba<SUB>2-x</SUB>Ca<SUB>x</SUB>Cu<SUB>3</SUB>O<SUB>y</SUB> superconductors was studied in terms of calcium content (X<SUB>ca</SUB>). YBa<SUB>2-x</SUB>Ca<SUB>x</SUB>Cu<SUB>3</SUB>O<SUB>7-δ</SUB> (X<SUB>ca</SUB>=0, 0.005, 0.01, 0.02, 0.04, 0.1, 0.3) powders were synthesized by the powder calcination method. YBa<SUB>2-x</SUB>Ca<SUB>x</SUB>Cu<SUB>3</SUB>O<SUB>7-δ</SUB> powders were mixed with 0.25mole Y<SUB>2</SUB>O<SUB>3</SUB> powder and 1wt.% CeO<SUB>2</SUB> as Y<SUB>2</SUB>BaCuO<SUB>5</SUB> (Y211) refiner, and finally made into Y<SUB>1</SUB>.<SUB>5</SUB>Ba<SUB>2-x</SUB>Ca<SUB>x</SUB>Cu<SUB>3</SUB>O<SUB>y</SUB> (Y1.5)+1wt.% CeO<SUB>2</SUB> composition. The single Y123 growth on the top surface was observed up to X<SUB>ca</SUB>=0.1, while the multiple Y123 growth was observed at X<SUB>ca</SUB>≥0.1. The superconducting transition temperature (T<SUB>c</SUB>) and critical current density (J<SUB>c</SUB>) of TSMG processed Y1.5 samples were inversely proportional to X<SUB>ca</SUB>. The Y211 size increased with increasing X<SUB>ca</SUB> due to the enhancement of Y211 coarsening by calcium doping. No Y211 refining effect by CeO<SUB>2</SUB> was observed in the calcium doped samples. The T<SUB>c</SUB> and J<SUB>c</SUB> decrease by calcium doping are likely to be due to the calcium incorporation with the Y123 lattice and formation of coarse Y211 particles.

한우 비육에 관한 연구 1 . Methylthiouracil 첨가 및 Estradiol 17β - Cypionate 주사가 약령 모우 비육에 미치는 효과

김창기 ( C K Kim ),이택원 ( T W Lee ),김종욱 ( J W Kim ),배대식 ( D S Bae ),오선균 ( S K Oh ),조지훈 ( C H Cho ),김법회 ( B H Kim ),김상렬 ( S Y Kim ),배신석 ( S S Bae ) 한국축산학회 1971 한국축산학회지 Vol.13 No.1

This study was performed to affirm any effects of methylthiouracil and estradiol 17β-cypionate administered to young bulls for short term fattening. Eighteen bulls of Korean native breed, approximately 1.5 to 2 years of age and 260㎏ to 360㎏ in weight, were used in this study. All bulls had received a basal ration of soiling corn and concentrate made up of 55% grains, 40% brans and 5% others, in a period of 40 days. Bulls were divided into six groups as follows: group C was not treated, group M-2 received 2g of methylthiouracil per day, group M-3 received 3g of methylthiouracil per day, group EM-0 was injected intramusculary with 25㎎ of estradiol 17β-cypionate in the neck region 10 days after the beginning of the fattening period, group EM-2 was injected with estradiol 17β-cypionate as above mentioned and simultaneously received 2g of methylthiouracil per day, and group EM-3 was injected with estradiol 17β-cypionate as above mentioned and simultaneously received 3g of methylthiouracil per day. The results obtained were summarized as follows. 1. The average daily gain was for group C: 0.83㎏, group M-2: 1.07㎏, group M-3: 1.40㎏, group EM-0, 0.93㎏, group EM-2: 0.95㎏, and group EM-3: 1.18㎏. The M-3 group gained significantly(P$lt;0.05) more weight than C and EM-0 group. There were no significant differences in the average daily gain between the groups injected with estradiol 17β-eypionate and the control group. 2. The average daily concentrate intake was as follows: group C: 5.47㎏, group M-2: 5.00㎏, group M-3: 4.52㎏, group EM-0: 5.21㎏, group EM-2: 4.35㎏, and group EM-3: 4.61㎏. The consumption of concentrate was decreased by 17% in the M-3 group compared with the C group. There was no significant difference in the soiling corn intake among these groups. 3. Feed consumed for 1㎏ gain were decreased by the supplementation of methylthiouracil. The consumption of DCP for 1㎏ gain was in group C: 0.82㎏, group M-2: 0.59㎏, group M-3: 0.41㎏, group EM-0: 0.70㎏, group EM-2: 0.59㎏, and group EM-3: 0.50㎏. The amounts of TDN required were; group C: 6.57㎏, group M-2: 4.76㎏, group M-3: 3.39㎏, group EM-0: 5.67㎏, group EM-Z: 4.87㎏, and group EM-3: 4.08㎏. The consumption of DCP and TDN for 1㎏ gain in the M-3 group was about a half of that in the C group. 4. There was not any significant difference in the increase in body measurements among the various groups. 5. The average margins in the fattening period of 40 days were for group C: 2,950won, group M-2: 5,327won, group M-3: 9,158won, group EM-0: 3,310won, group EM-2: 3,623won, and group EM-3: 5,575won. The margin of group M-3 was about three times higher than that of group C. In short, this experiment demonstrated that methylthiouracil when fed to young native Korean bulls at the proper level 40 days before slaughter would bring a noticeable effect on weight gain, feed efficiency and economic advantage. There were no advantages from the simultaneous injecting estradiol 17β-cypionate with methylthiouracil. The proper supplementation level of methylthiouracil would appear to be 3g per head per day in this experiment.

Particle distribution in melt-processed Y_1.5 Ba₂Cu₃O_x superconductors with BaCeO₃ addition

Youn, J.S.,No, K.,Kim, Y.H.,Mahmood, A.,Jun, B.H.,Han, Y.H.,Sung, T.H.,Kim, C.J. North-Holland 2009 Physica. C, Superconductivity Vol.469 No.15

To understand the effect of BaCeO<SUB>3</SUB> on a Y<SUB>2</SUB>BaCuO<SUB>5</SUB> (Y211) distribution, Y<SUB>1.5</SUB>Ba<SUB>2</SUB>Cu<SUB>3</SUB>O<SUB>x</SUB> (Y1.5) superconductors with/without 1wt.% BaCeO<SUB>3</SUB> additions were prepared by a top-seeded melt-textured growth (TSMG) process. Two different BaCeO<SUB>3</SUB> powders (as-synthesized (coarse powder) and an attrition-milled (fine powder)) were used and the size effect was compared with that obtained from a Y1.5 sample with no addition. A refinement of the Y211 particles was achieved for both the as-synthesized and attrition-milled BaCeO<SUB>3</SUB> additions. The distribution of the Y211 particles was most uniform in the Y1.5 sample prepared with the attrition-milled BaCeO<SUB>3</SUB> powder due to the reduced size of the Y211-free regions by the fine size BaCeO<SUB>3</SUB> addition. The highest J<SUB>c</SUB> was achieved in the Y1.5 sample prepared with the attrition-milled BaCeO<SUB>3</SUB> powder. The J<SUB>c</SUB> result agreed well with the microstructure variations by the addition of BaCeO<SUB>3</SUB> powders.