http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Physiological Races of Phytophthora infestans in Korea
Xuan-Zhe Zhang,Byung-Sup Kim 한국식물병리학회 2007 Plant Pathology Journal Vol.23 No.3
A total of the 261 Phytophthora infestans isolates collected from 2003 to 2005 in Korea were investigated for their physiological race composition. Among the isolates, we detected 18 physiological races and the dominant races were R0.1.3.5.6.10.11 and R0.1.3.5.6.7. 10.11 with frequencies of 18.4% and 11.4%, respectively. All of the P. infestans races carried multiple virulence genes and showed virulence to the potato resistance genes R1, R3, R5, R6, R7, R10 and R11, but not to R8 and R9. Therefore, it is likely that the physiological races of P. infestans were diverse in Korea.
Xuan-Zhe Zhang,김점순,전정욱,김병섭,Kyoung-Yul Ryu 한국식물병리학회 2005 Plant Pathology Journal Vol.21 No.1
Changes of control efficacy of chemical to potato late blight caused by Phytophthora infestans in potato fields from 2001 to 2004 were examined. Control efficacy of metalaxyl was suddenly decreased from 100% in 2002 to 50% in 2004 and that of dimethomorph also was similar to those of metalaxyl. However, the control efficacy of ethaboxam no great change. Both A1 and A2 mating type isolates were isolated from 2001 to 2004 in several areas in Korea. The majority of the P. infestans isolates were A1 mating type. Total 939 isolates of P.infestans obtained from several areas in Korea from 2001 to 2004 were examined for changes of sensitivity to metalaxyl. Frequencies of metalaxyl resistance isolates were gradually increased from 17% in 2001 to 84.2% in 2004, but isolation frequencies of metalaxyl sensitive and intermediate resistant isolate were decreased.Cause of decreasing control efficacy of metalaxyl was thought by increase of resistance isolates in A1 mating type population according to increasing metalaxyl use. Most isolates were grown at 0.5 µg/ml of dimethomorph and isolates grown at 1 µg/ml of dimethomorph were approximately 10.2-22.9%. However, no isolate was able to grow at 5.0 µg/ml. Based on these results,minimum inhibitory concentrations (MIC) of dimethomorph to P. infestans were determined to be 0.5-1.0 µg/ml. Our results indicated that the reason decreasing control efficacy of dimethomorph was not caused by occurrence of resistant isolates. About 5% and 12.1% isolates among the total isolates collected in 2003 and 2004 were grown on V-8 juice rye agar containing 1.0 µg/ml ethaboxam. The 2.1 and 25.4% isolates had MICs of 0.2-0.4 µg/ml, and MIC values of 87.9% and 74.3% isolates were less than 0.2 µg/ml concentrations of ethaboxam. Therefore, resistance development by P. infestans to ethaboxam is not likely to occur in the natural condition
Physiological Races of Phytophthora infestans in Korea
Zhang, Xuan-Zhe,Kim, Byung-Sup The Korean Society of Plant Pathology 2007 Plant Pathology Journal Vol.23 No.3
A total of the 261 Phytophthora infestans isolates collected from 2003 to 2005 in Korea were investigated for their physiological race composition. Among the isolates, we detected 18 physiological races and the dominant races were R0.1.3.5.6.10.11 and R0.1.3.5.6.7.10.11 with frequencies of 18.4% and 11.4%, respectively. All of the P. infestans races carried multiple virulence genes and showed virulence to the potato resistance genes R1, R3, R5, R6, R7, R10 and R11, but not to R8 and R9. Therefore, it is likely that the physiological races of P. infestans were diverse in Korea.
Zhang, Xuan-Zhe,Ryu, Kyoung-Yul,Kim, Jeom-Soon,Cheon, Jung-Uk,Kim, Byung-Sup The Korean Society of Plant Pathology 2005 Plant Pathology Journal Vol.21 No.1
Changes of control efficacy of chemical to potato late blight caused by Phytophthora infestans in potato fields from 2001 to 2004 were examined. Control efficacy of metalaxyl was suddenly decreased from 100% in 2002 to 50% in 2004 and that of dimethomorph also was similar to those of metalaxyl. However, the control efficacy of ethaboxam no great change. Both A1 and A2 mating type isolates were isolated from 2001 to 2004 in several areas in Korea. The majority of the P. infestans isolates were A1 mating type. Total 939 isolates of P. infestans obtained from several areas in Korea from 2001 to 2004 were examined for changes of sensitivity to metalaxyl. Frequencies of metalaxyl resistance isolates were gradually increased from 17% in 2001 to 84.2% in 2004, but isolation frequencies of metalaxyl sensitive and intermediate resistant isolate were decreased. Cause of decreasing control efficacy of metalaxyl was thought by increase of resistance isolates in A1 mating type population according to increasing metalaxyl use. Most isolates were grown at 0.5 ${\mu}g/ml of dimethomorph and isolates grown at 1 ${\mu}g/ml of dimethomorph were approximately 10.2-22.9%. However, no isolate was able to grow at 5.0 ${\mu}g/ml. Based on these results, minimum inhibitory concentrations (MIC) of dimethomorph to P. infestans were determined to be 0.5-1.0 ${\mu}g/ml. Our results indicated that the reason decreasing control efficacy of dimethomorph was not caused by occurrence of resistant isolates. About 5% and 12.1% isolates among the total isolates collected in 2003 and 2004 were grown on V-8 juice rye agar containing 1.0 ${\mu}g/ml ethaboxam. The 2.1 and 25.4% isolates had MICs of 0.2-0.4 ${\mu}g/ml, and MIC values of 87.9% and 74.3% isolates were less than 0.2 ${\mu}g/ml concentrations of ethaboxam. Therefore, resistance development by P. infestans to ethaboxam is not likely to occur in the natural condition.
Optimization for Cooling System of Batteries Having Porous Material Using Design of Experiments
Zhen-Zhe Li,Dong-Ji Xuan,Yong Li,Yun-De Shen 한국정밀공학회 2015 International Journal of Precision Engineering and Vol. No.
A hybrid power composed of fuel cell and batteries has become the reasonable strategy for hybrid electric vehicles. On the contrary,the produced heat by batteries can affect the total performance of hybrid electric vehicles significantly. In this paper, analysis methodsand optimization strategy were constructed for obtaining the high performance cooling system for batteries having porous material. At first, a numerical method for obtaining the temperature distribution of battery pack including porous material was developed byusing CFD technique. In the following step, the cooling systems for batteries with porous material or not were compared for showingthe merit of the cooling system for batteries having porous material. Ultimately, an optimization strategy based on D-optimal DOEmethod was obtained through a real optimal design process. There was 13.3% reduction on the view of the root mean squaretemperature between batteries compared with the original cooling system for batteries as shown in the optimization result. Theconstructed analysis method and optimization strategy can be used to improve the performance of the cooling system for batteries,and these works have made the theoretical basis for simulation and optimization of the cooling system for batteries.
A study on cooling efficiency using 1-d analysis code suitable for cooling system of thermoforming
Zhen-Zhe Li,호광수,Dong-Ji Xuan,설승윤 대한기계학회 2009 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.23 No.3
Thermoforming is one of the most versatile and economical processes available for polymer products, but cycle time and production cost must be continuously reduced in order to improve the competitive power of products. In this study, water spray cooling was simulated to apply to a cooling system instead of compressed air cooling in order to shorten the cycle time and reduce the cost of compressed air used in the cooling process. At first, cooling time using compressed air was predicted in order to check the state of mass production. In the following step, the ratio of removed energy by air cooling or water spray cooling among the total removed energy was found by using 1-D analysis code of the cooling system under the condition of checking the possibility of conversion from 2-D to 1-D problem. The analysis results using water spray cooling show that cycle time can be reduced because of high cooling efficiency of water spray, and cost of production caused by using compressed air can be reduced by decreasing the amount of the used compressed air. The 1-D analysis code can be widely used in the design of a thermoforming cooling system, and parameters of the thermoforming process can be modified based on the recommended data suitable for a cooling system of thermoforming.
Optimal Design for Cooling System of Batteries Using DOE and RSM
Zhen-Zhe Li,Yun-De Shen,Tai-Hong Cheng,Dong-Ji Xuan,Ming Ren,Gui-Ying Shen 한국정밀공학회 2012 International Journal of Precision Engineering and Vol. No.
A hybrid power composed of fuel cell and batteries has become the good strategy for HEV. On the contrary, the produced heat of batteries can affect to the total performance of HEV significantly. In this study, simulation methods with optimization were developed for obtaining the high performance cooling system of batteries. At first, a numerical method for obtaining the temperature distribution of batteries was developed by using CFD. In the following step, several parameters were investigated for selecting design variables with the important effect on the performance of the cooling system of batteries. Finally, an optimization method based on DOE and RSM was obtained through a real optimal design. There was 21.1% reduction on the view of the root mean square temperature between batteries as shown in the optimization result. The developed analysis with optimization can be used to improve the performance of the cooling system of batteries, and these works have made the theoretical basis for simulation and optimization of the cooling system of batteries.
A Study on Control of Heater Power and Heating Time for Thermoforming
Zhen-Zhe Li,Guang Ma,Dong-Ji Xuan,Seoung-Yun Seol,Yun-De Shen 한국정밀공학회 2010 International Journal of Precision Engineering and Vol. No.
Obtaining a uniform thickness of the final product using thermoforming is difficult, and the thickness distribution depends strongly on the distribution of the sheet temperature. In this paper, the time-dependent temperature distribution of the total sheets in the storing stage was studied because the temperature after the storing stage is the initial temperature of the heating process. An analytic solution for simulating the storing stage was derived. Using the solved analytic solution, the time-dependent temperature distribution of the total sheets was found out under the condition of assuming that the temperature-dependent specific heat of the ABS sheets was a certain constant value. Finally, the control method for a successful thermoforming using the heater power or heating time was researched in order to improve the quality of the final products. The results show that the satisfied temperature distribution can be obtained by adjusting the heater power or heating time. The method for analysis in this study will be used to improve the quality of the final products.