http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Co(Ⅱ)와 Methylthmol blue사이의 착물형성에 있어 평형상수에 미치는 압력과 온도의 영향
오대섭,최술한,이해운 慶北大學校 物理化學硏究所 1982 硏究論文集 Vol.3 No.-
Co(Ⅱ)와 Methylthymol blue(MTB) 사이의 착물 형성에 있어서 안정도에 미치는 압력과 온도의 영향을 자외선 분광광도법으로 연구 하였다. 사용된 압력은 1 bar에서 1200 bar이며 온도는 20, 30, 40℃ 사이에서 측정하였다. 이때 착물의 평형상수는 압력 및 온도의 증가에 따라 증가함을 알 수 있었으며 흡광계수도 또한 증가함을 알 수 있었다. 이들 각 평형상수로부터 착물 형성에 따른 부피, 엔탈피, 자유에너지 및 엔트로피의 변화량을 구함으로서 이 착물은 흡열반응이며 압력과 온도의 증가에 따라 반응이 더욱 잘 일어남을 알 수 있었다. 그리고 압력의 증가에 따른 흡수 maximum의 red shift 현상 및 압력 변화에 따른 진동자 세기와의 관계를 열역학적 함수와 관계를 지워 설명하였다. The effect of pressures and temperatures on the stabilities of the Co(Ⅱ)-Methylthymol blue complex have been investigated through ultraviolet spectrophotometric measurement. The stabilities of complexes were measured at 20 30 and 40℃ under 1300 600 900 and 1200 bars. The equilibrium constant of the complex was increased with pressure and temperature raising. The absorption coefficient was increased with both pressure and temperature. Change of volume, free energe, entropy and enthalpy for the formation of complexes were obtained from the equilibrium constants. The red shift observed a higher pressure and the relation between pressure and oscillator strength were discussed by means of thermodynamic function.
지상전술 C4I(ATCIS)체계 운용자 요구분석을 통한 효율적 발전 방안
박창운(Chang-Woon Park),양해술(Hae-Sool Yang) 한국콘텐츠학회 2008 한국콘텐츠학회논문지 Vol.8 No.5
본 연구에서는 육군 지상전술 C4I체계(ATCIS)가 전방 군단별로 구축 초기단계에 있어, 체계의 불안정과 운영의 비효율 등 문제점이 도출됨에 따라 시행착오를 최소화하고 경제성과 효과성을 검증하기 위해 문헌적 연구와 더불어 각국의 체계와 특성을 살펴보았으며, 실제 현장에서 자료수집과 더불어 공통성, 적시성, 경량화 및 단순화, 자동성, 야전 및 생존성, 다단계 보안 및 상호 운용성, 통합성과 국방 표준화 등 운용자 요구수준을 설문 자료를 수집하여 실증적인 분석과 검증을 통해 상호 상관관계를 살펴보았다. 검증결과 체계의 규격 및 운용예규, 기동성 및 보안성, 전장환경 적응성, 체계 지원 및 관리가 잘되어야만 체계운용에 대한 신뢰도가 확보됨과 동시, 체계에 대한 운용요구가 높고, 또한 체계운용 관련하여 지속적인 교육훈련과 체계정비 및 보완소요가 적어야 C4I체계가 잘 운용된다는 것을 알 수 있었다. 따라서 발전 방안은 체계에 대한 지속적인 운용자 교육과 정비시스템의 구축, IT와 네트워크를 결합한 한국적인 특성을 살린 한 단계 발전된 디지털화(C4ISR+D)화와 더불어 향후 운용자 측면의 성과측정 모델의 시스템 개발을 통해 지속적으로 보완 발전시켜야 한다는 사실을 확인할 수 있었다. This study was to minimize the trial and error in the primary step of the C4I system(ATCIS) of the each army corps on the front line, and test the economy and efficiency was tested by reviewing related papers and the system characteristics of other countries. The relationship was researched by analyzing the collected survey data and survey data related to the user's requirement level such as the army standards, that is, commonality, timeliness, simplification, automaticity, field availability and viability, multi-stage security and interoperability, unification. The result showed that the C4I system was efficiently operated through the system reliability for the specification of the system and operation manual, maneuverability and security, adaptability of the war field and system support and management, and good education and training about system operation, and less system maintenance and supplementary element. As a result, the development plan confirmed that the continuous operator education and the construction of the maintenance, and the upgrade digitalization(C4ISR+D) with the korean characteristics based on IT of network systems, and system development of the measurement model of the operator performance must be continuously supplemented in the near future.
지상전술 C4I(ATCIS)체계 운용자 요구분석을 통한 효율적 발전 방안 연구
박창운(Park, Changl-Woon),양해술(Yang, Hae-Sool) 한국산학기술학회 2008 한국산학기술학회 학술대회 Vol.- No.-
본 연구에서는 육군 지상전술 C4I체계(ATCIS)의 전력화 초기단계에서 주요국가의 C4I 체계와 한국의 체계 에 대한 특성을 살펴보았으며, 또한 정책이나 기술적인 분석에서 한 단계 더 나아가 이론적 배경과 더불 어 운용과 사용자 요구와 관련된 자료를 수집하여 분석을 실시하였다. 따라서 운용자 요구 수준에 맞는 체계의 보완과 C4I체계의 디지털화 등 발전방안을 도출하였다.
3-Tier 클라이언트/서버 모델 기반 스마트 뇌파케어시스템의 개발
안민희(Ahn, Min-Hee),박병운(Park, Pyung-Woon),양해술(Yang, Hae-Sool) 한국산학기술학회 2009 한국산학기술학회논문지 Vol.10 No.9
뇌파연구는 비교적 안전하게 뇌상태에 관한 다양한 정보를 제공한다. 상담자나 피검자는 뇌파의 측정, 분석, 관리 등 일련의 과정에 대해 편리하게 사용자 TCO를 절감할 수 있어야 하고, 원하는 정보에 실시간 접근이 가능해야 한다. 기존 환경이 전문가의 판단에 따른 수작업 형태였다면, 본 논문이 제안한 시스템은 3-Tier 클라이언트/서버 IT기 술 및 BQT를 포함하는 뇌파기술을 융합하고 최적화시킨 스마트 뇌파케어시스템이다. 이 시스템은 편리한 웹 인터페 이스를 통해 전 과정을 완전히 자동화하여 실시간서비스를 실현하였다. 본 연구로 개발된 이 시스템은 현재, 필드에서 서비스를 진행하고 있으며, DB에 수집된 자료는 연구자들에게 임상연구의 용도로 제공되고 있다. The brain-wave research provides relatively various information for brain condition in safety. The counselor or measuree will must easily reduce user TCO about the series of process for the measurement, analysis, and management of brain-wave, and can access to the desired information in real time. While the traditional method for brain-wave process was processed manually by the judgment of a specialist. In this paper the developed system is smart brain-wave care system based on optimizing and combining the 3-Tier client/server by IT with brain-wave technology including BQT. This system was developed in the real-time service with a completely automated process by the conveniently web interface. Our system currently gave a service at the field, and the collected data on DB were provided to researchers for the use of clinical research.
Cu-Cr 합금의 인장강도와 전기전도도에 미치는 Cr 첨가량 및 가공열처리의 영향
김기태(Ki Tae Kim),정운재(Woon Jae Jung),신한철(Han Chul Shin),최종술(Chong Sool Chol) 한국열처리공학회 2001 熱處理工學會誌 Vol.14 No.1
N/A The effects of Cr content above its solubility limit and thermomechanical treatment on tensile strength and electrical conductivity of Cu-Cr alloys were studied to obtain optimum Cr content exhibiting a high tensile strength without degradation of electrical conductivity. The increase in Cr content above the solubility limit increased tensile strength of Cu-Cr alloys without deterioration of the electrical conductivity. The electrical conductivity was not affected by cold rolling. The electrical conductivity of a Cu-3.5%Cr alloy subjected to cold rolling→aging treatment (450℃×1 hr)→cold rolling was equal to that of the alloy subjected to cold rolling→aging treatment. However, the tensile strength of the alloy subjected to the former thermomechanical treatment was superior to that of the alloy subjected to the latter thermomechanical treatment at all the deformation degrees.
고전도성 Cu 합금의 전기전도도 및 연화특성에 미치는 합금원소첨가의 영향
김기태(Ki Tae Kim),정운재(Woon Jae Jung),최종술(Chong Sool Choi) 한국주조공학회 1999 한국주조공학회지 Vol.19 No.2
N/A For developing high conductivity Cu based alloys available for continuous casting mold, effects of alloying elements on electrical conductivity and softening behaviour of Cu based alloys were investigated. Addition of Mg to Cu-0.1%Ag-x%P alloys increased the electrical conductivity and the resistance to softening due to precipitation of Mg3P2. Addition of Te to Cu-Sn alloys increased the resistance to softening without loss of the electrical conductivity. Cd whose electronic structure is similar to that of Cu was not detrimental to the electrical conductivity of Cu alloys. Cu-0.032%Sn-0.023%Te and Cu-0.2%Cd alloys showed the same electrical conductivity and softening temperature as those of Cu-0.1%Ag-0.013%P alloy. (Received February 7, 1999)