La Charreri>a

Torre, Fernando Torres de la,Torres de la Torre, Fernando 한국외국어대학 서반아어과 1986 AULA Vol.4 No.1

Adhesion Energies of 2D Graphene and MoS₂ to Silicon and Metal Substrates

Torres, Jorge,Zhu, Yisi,Liu, Pei,Lim, Seong Chu,Yun, Minhee Wiley (John WileySons) 2018 Physica status solidi. PSS. A, Applications and ma Vol.215 No.1

A micro-computed tomographic study using a novel test model to assess the filling ability and volumetric changes of bioceramic root repair materials

Torres Fernanda Ferrari Esteves,Pinto Jader Camilo,Figueira Gabriella Oliveira,Guerreiro-Tanomaru Juliane Maria,Tanomaru-Filho Mario 대한치과보존학회 2021 Restorative Dentistry & Endodontics Vol.46 No.1

Objectives: New premixed bioceramic root repair materials require moisture for setting. Using micro-computed tomography (micro-CT), this study evaluated the filling ability and volumetric changes of calcium silicate-based repair materials (mineral trioxide aggregate repair high-plasticity [MTA HP] and Bio-C Repair, Angelus), in comparison with a zinc oxide and eugenol-based material (intermediate restorative material [IRM]; Dentsply DeTrey). Materials and Methods: Gypsum models with cavities 3 mm deep and 1 mm in diameter were manufactured and scanned using micro-CT (SkyScan 1272. Bruker). The cavities were filled with the cements and scanned again to evaluate their filling capacity. Another scan was performed after immersing the samples in distilled water for 7 days to assess the volumetric changes of the cements. The statistical significance of differences in the data was evaluated using analysis of variance and the Tukey test with a 5% significance level. Results: Bio-C Repair had a greater filling ability than MTA HP (p < 0.05). IRM was similar to Bio-C and MTA HP (p > 0.05). MTA HP presented the largest volumetric change (p < 0.05), showing more volume loss than Bio-C and IRM, which were similar (p > 0.05). Conclusions: Bio-C Repair is a new endodontic material with excellent filling capacity and low volumetric change. The gypsum model proposed for evaluating filling ability and volumetric changes by micro-CT had appropriate and reproducible results. This model may enhance the physicochemical evaluation of premixed bioceramic materials, which need moisture for setting.

Mass transfer analysis for CO₂ bubble absorption in methanol/Al₂O₃ nanoabsorbents

Torres Pineda, Israel,Kim, Dongmin,Kang, Yong Tae Elsevier 2017 INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER - Vol.114 No.-

<P><B>Abstract</B></P> <P>In this paper computational fluid dynamics (CFD) analysis is carried out to investigate CO<SUB>2</SUB> bubble absorption characteristics in methanol/Al₂O<SUB>3</SUB> nanoabsorbents. Bubble size, rising velocity and mass transfer rate are compared to the previous experimental results for validation. It is found that the distance traveled for each CO<SUB>2</SUB> bubble increases as the concentration of Al<SUB>2</SUB>O<SUB>3</SUB> increases, which, in consequence, increases the residence time between liquid and gas phases resulting in higher interfacial mass transfer rates. For the case of a bubble rising in the gap between walls, the wall shear stress has a major effect on the bubble diameter and rising velocity which in consequence affects the mass transfer coefficient. It is concluded that the mass transfer coefficient enhances by about 40% by adding Al₂O<SUB>3</SUB> nanoparticles (0.01vol%) compared with pure methanol absorbent from the experimental and simulation results. It is also concluded that the use of nanoparticles has a higher impact on mass transfer rate than it does on mass transfer amount, which depends on the residence time and travel distance of CO<SUB>2</SUB> bubbles.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Mass transfer analysis is carried out for CO<SUB>2</SUB> bubble absorption in nanoabsorbents. </LI> <LI> CO<SUB>2</SUB> absorption enhancement by nanoabsorbents is evaluated. </LI> <LI> Mass transfer coefficient enhances by about 40% by adding Al₂O<SUB>3</SUB> nanoparticles (0.01vol%). </LI> <LI> The use of nanoparticles has a higher impact on mass transfer rate than it does on mass transfer amount. </LI> </UL> </P>

How do imaging protocols affect the assessment of root-end fillings?

Torres Fernanda Ferrari Esteves,Jacobs Reinhilde,EzEldeen Mostafa,de Faria-Vasconcelos Karla,Guerreiro-Tanomaru Juliane Maria,dos Santos Bernardo Camargo,Tanomaru-Filho Mário 대한치과보존학회 2022 Restorative Dentistry & Endodontics Vol.47 No.1

Objectives This study investigated the impact of micro-computed tomography (micro-CT)-based voxel size on the analysis of material/dentin interface voids and thickness of different endodontic cements. Materials and Methods Following root-end resection and apical preparation, maxillary premolars were filled with mineral trioxide aggregate (MTA), Biodentine, and intermediate restorative material (IRM) (n = 24). The samples were scanned using micro-CT (SkyScan 1272; Bruker) and the cement/dentin interface and thickness of materials were evaluated at voxel sizes of 5, 10, and 20 µm. Analysis of variance and the Tukey test were conducted, and the degree of agreement between different voxel sizes was evaluated using the Bland and Altman method (p < 0.05). Results All materials showed an increase in thickness from 5 to 10 and 20 µm (p < 0.05). When evaluating the interface voids, materials were similar at 5 µm (p > 0.05), while at 10 and 20 µm Biodentine showed the lowest percentage of voids (p < 0.05). A decrease in the interface voids was observed for MTA and IRM at 20 µm, while Biodentine showed differences among all voxel sizes (p < 0.05). The Bland-Altman plots for comparisons among voxel sizes showed the largest deviations when comparing images between 5 and 20 µm. Conclusions Voxel size had an impact on the micro-CT evaluation of thickness and interface voids of endodontic materials. All cements exhibited an increase in thickness and a decrease in the void percentage as the voxel size increased, especially when evaluating images at 20 µm.

Son Pyong-hui y el Movimiento del primero de Marzo

Torre, Fernando Torres de la 서울大學校 스페인中南美硏究所 1996 이베로아메리카硏究 Vol.7 No.-

Genetic evaluation of sheep for resistance to gastrointestinal nematodes and body size including genomic information

Torres Tatiana Saraiva,Sena Luciano Silva,Santos Gleyson Vieira dos,Figueiredo Filho Luiz Antonio Silva,Barbosa Bruna Lima,Júnior Antônio de Sousa,Britto Fábio Barros,Sarmento José Lindenberg Rocha 아세아·태평양축산학회 2021 Animal Bioscience Vol.34 No.4

Objective: The genetic evaluation of Santa Inês sheep was performed for resistance to gastrointestinal nematode infection (RGNI) and body size using different relationship matrices to assess the efficiency of including genomic information in the analyses. Methods: There were 1,637 animals in the pedigree and 500, 980, and 980 records of RGNI, thoracic depth (TD), and rump height (RH), respectively. The genomic data consisted of 42,748 SNPs and 388 samples genotyped with the OvineSNP50 BeadChip. The (co)variance components were estimated in single- and multi-trait analyses using the numerator relationship matrix (A) and the hybrid matrix H, which blends A with the genomic relationship matrix (G). The BLUP and single-step genomic BLUP methods were used. The accuracies of estimated breeding values and Spearman rank correlation were also used to assess the feasibility of incorporating genomic information in the analyses. Results: The heritability estimates ranged from 0.11±0.07, for TD (in single-trait analysis using the A matrix), to 0.38±0.08, for RH (using the H matrix in multi-trait analysis). The estimates of genetic correlation ranged from –0.65±0.31 to 0.59±0.19, using A, and from –0.42±0.30 to 0.57±0.16 using H. The gains in accuracy of estimated breeding values ranged from 2.22% to 75.00% with the inclusion of genomic information in the analyses. Conclusion: The inclusion of genomic information will benefit the direct selection for the traits in this study, especially RGNI and TD. More information is necessary to improve the understanding on the genetic relationship between resistance to nematode infection and body size in Santa Inês sheep. The genetic evaluation for the evaluated traits was more efficient when genomic information was included in the analyses. Objective: The genetic evaluation of Santa Inês sheep was performed for resistance to gastrointestinal nematode infection (RGNI) and body size using different relationship matrices to assess the efficiency of including genomic information in the analyses.Methods: There were 1,637 animals in the pedigree and 500, 980, and 980 records of RGNI, thoracic depth (TD), and rump height (RH), respectively. The genomic data consisted of 42,748 SNPs and 388 samples genotyped with the OvineSNP50 BeadChip. The (co)variance components were estimated in single- and multi-trait analyses using the numerator relationship matrix (A) and the hybrid matrix H, which blends A with the genomic relationship matrix (G). The BLUP and single-step genomic BLUP methods were used. The accuracies of estimated breeding values and Spearman rank correlation were also used to assess the feasibility of incorporating genomic information in the analyses.Results: The heritability estimates ranged from 0.11±0.07, for TD (in single-trait analysis using the A matrix), to 0.38±0.08, for RH (using the H matrix in multi-trait analysis). The estimates of genetic correlation ranged from –0.65±0.31 to 0.59±0.19, using A, and from –0.42±0.30 to 0.57±0.16 using H. The gains in accuracy of estimated breeding values ranged from 2.22% to 75.00% with the inclusion of genomic information in the analyses.Conclusion: The inclusion of genomic information will benefit the direct selection for the traits in this study, especially RGNI and TD. More information is necessary to improve the understanding on the genetic relationship between resistance to nematode infection and body size in Santa Inês sheep. The genetic evaluation for the evaluated traits was more efficient when genomic information was included in the analyses.

Analyzing corrosion rates of TiO₂ nanotubes/titanium separation passive layer under surface and crystallization changes

Torres, I. Zamudio,Dominguez, A. Sosa,Bueno, J.J. Perez,Meas, Y.,Lopez, M.L. Mendoza,Dector, A. Techno-Press 2021 Advances in nano research Vol.10 No.3

The evaluation of the corrosion resistance of titanium with a TiO2 nanotubes top layer was carried out (TiO2 NT). These nanostructures were evolved into anatase nanoparticles without heat treatment in an aqueous medium, which is a novel phenomenon. This work analyzes the layer between the nanotube bottom and the substrate, which is thin and still susceptible to corrosion. The bottom of TiO2 nanotubes having Fluor resulting from the synthesis process changed between amorphous to crystalline anatase with a crystallite size of about 4 nm, which influenced the corrosion rates. Four kinds of samples were evaluated. A) NT by Ti anodizing; B) NTSB for Ti plates, either modifying its surface or anodizing the modified surface; C) NT-480 for anodized Ti and heat-treated (480℃) for reaching the anatase phase; D) NTSB-480 for Ti plates, first, modifying its surface using sandblast, after that, anodizing the modified surface, and finally, heat-treated to 480℃ to compare with samples having induced crystallization and passivation. Four electrochemical techniques were used to evaluate the corrosion rates. The surfaces having TiO2 nanotubes with a sandblast pre-treatment had the highest resistance to corrosion.

Micro-computed tomographic evaluation of the flow and filling ability of endodontic materials using different test models

Torres, Fernanda Ferrari Esteves,Guerreiro-Tanomaru, Juliane Maria,Chavez-Andrade, Gisselle Moraima,Pinto, Jader Camilo,Berbert, Fabio Luiz Camargo Villela,Tanomaru-Filho, Mario The Korean Academy of Conservative Dentistry 2020 Restorative Dentistry & Endodontics Vol.45 No.1

Objectives: This study compared the flow and filling of several retrograde filling materials using new different test models. Materials and Methods: Glass plates were manufactured with a central cavity and 4 grooves in the horizontal and vertical directions. Grooves with the dimensions used in the previous study (1 × 1 × 2 mm; length, width, and height respectively) were compared with grooves measuring 1 × 1 × 1 and 1 × 2 × 1 mm. Biodentine, intermediate restorative material (IRM), and mineral trioxide aggregate (MTA) were evaluated. Each material was placed in the central cavity, and then another glass plate and a metal weight were placed over the cement. The glass plate/material set was scanned using micro-computed tomography. Flow was calculated by linear measurements in the grooves. Central filling was calculated in the central cavity (㎣) and lateral filling was measured up to 2 mm from the central cavity. Results: Biodentine presented the least flow and better filling than IRM when evaluated in the 1 × 1 × 2 model. In a comparison of the test models, MTA had the most flow in the 1 × 1 × 2 model. All materials had lower lateral filling when the 1 × 1 × 2 model was used. Conclusions: Flow and filling were affected by the size of the test models. Higher grooves and materials with greater flow resulted in lower filling capacity. The test model measuring 1 × 1 × 2 mm showed a better ability to differentiate among the materials.

DOMESTIC INTEGRATION OF RICE MARKETS IN THE PHILIPPINES AND ITS DETERMINANTS

Torres, Maria Angelica C.,Bacud, Eva Salve,Delos Reyes, Julieta 한국무역학회 2019 한국무역학회 국제학술대회 Vol.2019 No.08

Due to the high political significance of rice, government has been putting efforts in order to address rice insufficiency in the Philippines. Provisioning of trade reforms and policies is one of the interventions to improve the availability and affordability of rice in the country, and to protect the welfare of the local rice farmers. Government intervention and support services would not be fully effective if markets are not integrated, since price signals would not be transmitted efficiently and gains from trade will not be fully grasped. This paper examined integration between domestic rice markets across 16 regions in the Philippines using Johansen co-integration approach with 18-year period monthly retail price series of regular-milled rice from January 2000 to December 2017. Determinants of market integration were also identified. It was found out that 63% of the regional rice markets are integrated. Volume of production, distance and shock affected areas have significantly influenced integration among regional rice markets.