http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이태언 부산 외국어 대학교 2000 外大論叢 Vol.20 No.1
The society education course provided by the primary, middle and high school is prepared for the purpose of making the youth to understand the real aspect of the social life and to accommodate themselves to it. Even further, it aims for teaching them how they should behave in order to contribute to the society. In therms of the course name, it should be named as the social studies education or social life course education. Thats because the term social education denotes the non-organizational, non-formal or adult education. Nowadays, the importance of social education is being emphasized by our society from the perspectives of lifetime education. However, this phenomenon should be seen from the different viewpoint than the social education. The objectives of social education lie in the cultivation of people who are equipped with the adaptability capability through understanding and analysis of our social phenomenon. The characteristics of the social education can be defined as follows; 1. To bring up the desirable citizen who can actively contribute to development of the country and prosperity of the peoples life. 2. Sets the social fact and phenomenon as the study subject and utilizes the study outcomes of the social science area in education. Most of all, contributes to enhancement of basic order and moral level of the people through training the future-generation citizens on the law-abiding sprit. 3. To bring up the Koreans who can make contribution to the world society by teaching them thinking faculty from the social science perspective, which is essential to acquire the social science knowledge, and high level knowledge. However, the above three objectives should be taken as closely interrelated objectives rather than the separated one. The image of the desirable human beings should be arranged in the actual social education site because the objectives of education is to switch the behavior of human beings to the desirable direction. This study aims to search for the method that enables effective implementation of social education described above. In chapter 1, the characteristics of the social education were studied. On the next chapter, the current state of the social education was examined through modification of the school curriculum. At the last chapter, reasonable improvements of the social education were suggested. The opriginal intention of this study cannot be satisfactorily achieved because the study subject was quite diversified and theoretical limit cannot be overcome, since several documents were studied. However, when the normalization of the educational environment is carried out and the teachers change their way of thinking and provide a lesson in their class with a sense of mission, this study will provide an opportunity to confirm that the overall objectives of social education can be achieved in the education site.
全彦燦,芮圭玄,朴興植,全泰玉 東亞大學校 1989 東亞論叢 Vol.26 No.1
The present study was undertaken to investigate the otheogonal cutting mechanism of pure aluminum with sintered carbide tools, such as the cutting resistance, shear angle and work, the formation of chip and the instantaneous aspect for cutting process. The results obtained are as follows: 1. In case of negative tool rake angle, the decrease rate of cutting resistance was progressed till high speed cutting. 2. When the cutting depth is small, the shear angle of cutting part depends on the influence of size effect. 3. The formation of chip is classified into shear type, vertical compression type, horizontal compression type and flow type. 4. The measurement of the built-up edge was able to obtain decreased by the geometric expression of the instantaneous aspect for cutting process.
전태옥,전언찬,박흥식,배춘익 동아대학교 공과대학 부설 한국자원개발연구소 1995 硏究報告 Vol.19 No.2
Temperature distribution on the flank face in orthogonal turning with cutting tool of high speed steel is studied by using a finite element method and experiments. Experiments are carried out to verify the validity of the temperature measurement by using a thermoelectric couple junction imbedded in a cutting tool. Good agreement is obtained between the analytical results and the experimental ones for the temperature distributions on flank face of cutting tool Flank wear were observed by the tool microscope. The analytical results show that the temperature on the top flank face of a tool is higher because of the difference of the friction velocity on each face of the tool.
全泰玉,全彦燦,朴興植,朴永宅 동아대학교 공과대학 부설 한국자원개발연구소 1989 硏究報告 Vol.13 No.2
In this paper, results of test about machinability of the carbide tools having various tool angle on light cutting are described. The conclusion is as follows ; 1. According to the increase of cutting speed, specific cutting forces are decreased. 2. According to the increase of cutting speed and feed, chip width and chip thickness are both decreased. 3. The experimental roughness of working surface became smaller than theoretical roughness. 4. Size of burrs decreased with increase of disengage angle.
권태일,이동언 대한건축학회 2004 대한건축학회논문집 Vol.20 No.10
The theoretical framework of "Folding in Architecture" has been generally regarded as the expression of the French philosopher, Gilles Deleuze's idea of the "fold" or pli, originally from the characteristics of Leibniz's philosophy. However, actual works toward this architectural tendency are fundamentally different from Deleuze's ontological thinking. Because these were primarily fabricated as formal theme by architects always searching for the meaning of "fold" as only tangible attribute. Thus, this paper attempts to point out that controversial issue, and suggest a new meaning of "Folding in Architecture", which is truely based on Deleuze's broad meaning of the "fold" registered both as a material phenomenon and as a metaphysical Idea, that can overcome the fallacy of those contemporary architects.
金尙泰,朴彦坤 홍익대학교환경개발연구원 1998 환경개발연구논문집 Vol.3 No.-
Thoughtful transformation of Buddhism was emerged by that Mandala was transmitted to Korea, this transformation, a standard model of early temple's arrangement, was based on establishment of Buddhist temples. As the spatial system which was divided into three space ; a boundary, four sides and a main Buddhist sanctum, was transformed to mountainous temple and Mandala of Esoteric Buddhism's main thought effected and traditional belief was absorbed, these transformations pulled off the spatial system of three levels and showed the emergence of gates and sanctums which was the gate of both the four Devas and Mahavairocana and the sanctum of both Yak-Sa and Myung-Bu and gates of a mountain god, Sam-sung and Chil-Sung which was traditional space of Korea. Mandala of Avatamska unified the basic thought of Buddhist temples. On the base of these thought, the basic form of Buddhist temples's arrangement was the iconology of Mandala. In the four sides ; east, west, south and north, As the result that the function of the northern sanctum of Arhant and the southern sanctum of Myung-Bu which was comprised of Vairacana was emerged frequently but both the eastern and the western sanctum wasn't emerged was obtained, It is that as the function of the eastern and western sanctum is not necessary in making three Buddha which is the side buddha of Vairocana, making the sanctum corresponded to Vairocana is not necessary. As I result through the base of this, the spacial system of Mandala is the system of basic though in planning a Buddhist temples and means the system of Korean Mandala which is based on Vairocana from the system of three levels in Buddhist temple sites to in present mountainous Buddhist temples.
전언찬,김순경,전태옥 東亞大學校 大學院 1995 大學院論文集 Vol.20 No.-
The results were obtained with changes according to the surface roughness of work roll and method to make the peak count on the roll in the temper rolling, and factors to affect the work roll surface in actual roiling machine (ie. Temper mill). Conclusions are as follows. 1. E.D.T(Electro-discharge texturing) roll provide more uniform roughness distribution than the shot blasted roll, and it's life time is two times longer than that of shot blasted because it has more sine wave roughness. 2. The higher the peak count of surface roughness, the more time is necessary to work roll texture in shot blasting method, surface roughness is relating to the grit size, impeller speed and hardness of roll material, But it can not control the peak count. 3. In shot blast texturing, Surface roughness of temper rolled strip which is transferred surface roughness of work roll is more than that of E.D.T roll. 4. E.D.T roll has more uniform than the shot blasted roll and has more peak count than that of shot blasted roll. The surface of painted strip to image clarity is superior to that of shot blasted roll because E.D.T roll has more peak count and smooth surface.
全泰玉,全彦燦,朴興植 동아대학교 공과대학 부설 한국자원개발연구소 1984 硏究報告 Vol.8 No.2
For the study, thermoplastic rigid polyvinyl chloride, which has been widely used for the parts of machine, has been applied as high polymetric materials and has been investigated into relationship between circumferential surface and steel sphere in order to clear the characteristics of the softened surface layer with frictional velocity, contact load and feed. The results obtained are as follows. 1. In constant frictional velocity, as the contact load was increased by degree the coefficients of friction was slowly decreased and it has inclination of increasing by softness on the surface layer according as the contact load was increased. 2. In constant contact load, as the frictional velocity was increased by 63m/min the coefficients of friction was slowly decreased, and in more than, the coefficients of friction was rapidly decreased by a lubricating effect of the frictional surface layer. 3. The fusional trace on the harden polyvinyl chloride was appeared by the frictional force with it according as the frictional velocity and the contact load were become high, especially appeared the deep ones with softening on the frictional surface. 4. Under condition of feeding, the coefficients of friction of a new surface was high in higher than 503m/min of the frictional velocity, but low in lower than the value comparing with repeated friction.
김상태,박언곤 대한건축학회 2004 대한건축학회논문집 Vol.20 No.4
Each buddhist temple expresses its own dogmatic ideology. During the Unified Silla Period, Esoteric Buddhism became widely accepted since it was embraced by both the Zen and the Dogmatic Buddhism. The ideology of the Esoteric Buddhism, which started out with the triangular composition, uses the geometric elements of circles, squares, half circles, and triangles which forms the Cosmos, to complete the Mandala image. Because Esoteric Buddhism and the two pagoda buddhist temple(Sachunwangsa Buddhist Temple Site) started to appear around the same period, we might be able to find the compositional elements of the two pagoda buddhist temple that remains unknown to these days.
권태일,이동언 대한건축학회 2003 대한건축학회논문집 Vol.19 No.2
The theoretical framework of Deconstructivist Architecture has been generally regarded as a presentation of the French philosopher Jacques Derrida's critical thinking since it first appeared in 1980's. However, actual works of this architectural trend are quite different from his thinking because these were primarily affected by literary critics of American Deconstructuion, rather than his philosophical direction. Therefore, this paper attempts to point out that controversial issue, and suggest a new meaning of Deconstructivist Architecture, which is truly based on Derrida's idea of 'Openness and Practicality of Text' and can overcome the fallacy of American Deconstruction.