Wire Saw 슬러리로부터 Si, SiC 분리 및 제올라이트 합성에 대한 연구

한승열,이종대,박노국,이태진,류시옥 한국공업화학회 2004 응용화학 Vol.8 No.1

This study was focused on the separation of Si and from Wire Saw Slurry in Wire Saw Slicing process and synthesis of zeolite by mixing with water glass obtained from its process and Alumina. In order to separate Si and SiC from Wire Saw Slurry, Alkai disslution was used and then Na₂O showed superior dissoluble property of Si. At this time, SiC was separated as powder from Alkali apueous solution. Si was dissolved as a liquid in Alkali aqueous solution. After removing SiC powder, the powder formed was obtained from drying. Alkali aqueous solution and then it was the water glass (Na₂SiO₃)confirmed by XRD analysis. Water glass (Na₂SiO₃) and Alumina mixed with pure water made as a synthesis of zeolite through the crystallization by aging and hydrothermal reaction. The manufactured zeolite was Sodium Aluminum Silicate Hydrate confirmed by XRD analysis.

Wire Saw 슬러리로부터 Si와 SiC의 선택적 회수

한승열,이종대,전진혁,박노국,이태진,류시옥 嶺南大學校 工業技術硏究所 2004 工業技術硏究所論文集 Vol.32 No.1

This study was focused on the recovery of Si and SiC from wire saw slurry in wire saw slicing process. In order to separate Si and SiC from wire saw slurry, alkali dissolution method was used and then Na₂O showed superior dissolution property of Si. At this time, SiC was separated as powder from alkali aqueous solution. Si was dissolved as a liquid in alkali aqueous solution. After removing SiC powder, the powder was obtained by drying alkali aqueous solution and then it's XRD analysis showed that it was the water glass (Na₂SiO₃).

UV-TiO₂광촉매 반응기를 이용한 미생물의 살균효과

김시욱,이정섭,정해광,박열,윤성명,유진철,이범규,이인화,박진열 조선대학교 환경공해연구소 1998 環境公害硏究 Vol.14 No.-

UV-TiO_(2) 반응기를 이용하여 Escherichia coli와 Aspergillus oryzae var. oryzae의 살균효과를 측정하였다. 254 ㎚에서 최대 14 watt의 자외선 방출량을 내는 램프를 원형 Pyrex유리관 중앙에 설치하였고 TiO_(2)는 석영관에 박막증착(Thin Film Coating)된 형태와 슬러리 형태로 나누어 회분식으로 살균정도를 측정하였다. E. coli에 대한 살균력은 1.7× 10^(7) cells/㎖에 대해 5분간 자외선 조사를 하였을 경우 2.0× 10^(2) cells/㎖으로 감소하였고, 자외선 조사와 함께 슬러리 형태의 TiO_(2)를 첨가하였을 경우에는 3.4× 10 cells/㎖으로, 자외선 조사와 함께 TiO_(2)가 석영관에 박막증착된 경우에는 7.6× 10^(2) cells/㎖으로 감소하였다. 한편 위와 같은 조건에 유리관 하부에서 기포를 주입후 11분 동안 자외선을 조사시킨 경우에는 1.3× 10^(2) cells/㎖으로, 자외선 조사와 함께 슬러리 형태의 TiO_(2)를 첨가하였을 경우에는 1× 100 cells/㎖으로, 자외선 조사와 함께 TiO_(2)가 박막증착된 경우에는 7.9× 10 cells/㎖을 나타내었다. 결국 UV-TiO_(2) 반응기에 사용되는 TiO_(2)가 슬러리 형태일 때 최대 살균효과를 나타내었으나 기포가 첨가되었을때는 오히려 살균에 장애를 받는 것으로 나타난 반면 석영관에 박막증착된 경우에는 기포가 첨가되는 것이 살균에 효과적인 것으로 관찰되었다. The killing effect of UV-TiO_(2) photocatalytic system on the Escherichia coli DH5-慣 and Aspergillus oryzae var. oryzae (KCTC 6095) was studied. The UV lamp which emits maximum 14 watts at 254 nm was set on the center of pyrex round glass tube. Two types of TiO_(2), one of which is slurry and another which is thin film coated form, were used to determine the killing effect. When UV was irradiated to 1.7 * 10^(5) cells/??of E. coli for 11 min, the living cell number decreased to 4.0 * 1.0^(0) cells/?? The effect of UV system together with slurried TiO_(2) was less than 1 cells/?? whereas that of UV-coated TiO_(2) system decreased to 7.1 * 10^(3) cells/?? To study the effect of bubble on the killing of microorganisms, air was bubbled to the bottom of glass tube. When 1.7 * 10^(5) cells/??were exposed to UV for 11 min in combination with air bubble, the living cell number decreased to 1.3 x 10^(2) cells/?? In the same condition except the addition of slurried TiO_(2), the living cells were 1 * 10^(2) cells/?? However, more cells could be killed by the system which consists of UV, coated TiO_(2), and air bubble (7.9 * 10^(1) cells/??. From these results, it was found that UV-slurried system is the most effective one, but its killing effect is not stimulated by air bubble. However, bubbling was very effective in the UV-coated TiO_(2) system.

UV-TiO_2 광촉매 반응기를 이용한 미생물의 살균효과

김시욱,이정섭,정혜광,박열,윤성명,유진철,이범규,이인화,박진열 조선대학교 환경연구소 1998 環境硏究 Vol.14 No.1

UV-TiO_2 반응기를 이용하여 Escherichia coli와 Aspergillus oryzae var. oryzae의 살균효과를 측정하였다. 254㎚에서 최대 14 watt의 자외선 방출량을 내는 램프를 원형 Pyrex유리관 중앙에 설치하였고 TiO_2는 석영관에 박막증착(Thin Film Coating)된 형태와 슬러리 형태로 나누어 회분식으로 살균정도를 측정하였다. E. coli에 대한 살균력은 1.7×10^7 cells/㎖에 대해 5분간 자외선 조사를 하였을 경우 2.0×10^2 cells/㎖으로 감소하였고, 자외선 조사와 함께 슬러리 형태의 TiO_2를 첨가하였을 경우에는 3.4×10 cells/㎖으로, 자외선 조사와 함께 TiO_2가 석영관에 박막증착된 경우에는 7.6×10^2 cells/㎖으로 감소하였다. 한편 위와 같은 조건에 유리관 하부에서 기포를 주입수 11분 동안 자외선을 조사시킨 경우에는 1.3×10^2 cells/㎖으로, 자외선 조사와 함께 슬러리 형태의 TiO_2를 첨가하였을 경우에는 1×102 cells/㎖으로, 자외선 조사와 함께 TiO_2가 박막증착된 경우에는 7.9×10 cells/㎖을 나타내었다. 결국 UV-TiO_2 반응기에 사용되는 TiO_2가 슬러리 형태일 때 최대 살균효과를 나타내었으나 기포가 첨가되었을때는 오히려 살균에 장애를 받는 것으로 나타난 반면 석영관에 박막증착된 경우에는 기포가 첨가되는 것이 살균에 효과적인 것으로 관찰되었다. The killing effect of UV-TiO_2 photocatalytic system on the Escherichia coli DH5-α and Aspergillus oryzae var. oryzae (KCTC 6095) was studied. The UV lamp which emits maximum 14 watts at 254 ㎚ was set on the center of pyrex round glass tube. Two types of TiO_2, one of which is slurry and another which is thin film coated form, were used to determine the killing effect. When UV was irradiated to 1.7×10^5 cells/㎖ of E. coli for 11 min, the living cell number decreased to 4.0×10^0 cells/㎖. The effect of UV system together with slurried TiO_2 was less than 1 cells/㎖, whereas that of UV-coated TiO_2 system decreased to 7.1×10^3 cells/㎖. To study the effect of bubble on the killing of microorganisms, air was bubbled to the bottom of glass tube. When 1.7×10^5 cells/㎖ were exposed to UV for 11 min in combination with air bubble, the living cell number decreased to 1.3×10^2 cells/㎖. In the same condition except the addition of slurried TiO_2, the living cells were 1×10^2 cells/㎖. However, more cells could be killed by the system which consists of UV, coated TiO_2, and air bubble (7.9×10^1 cells/㎖). From these results, it was found that UV-slurried system is the most effective one, but its killing effect is not stimulated by air bubble. However, bubbling was very effective in the UV-coated TiO_2 system.

행정법과 행정관리

표시열 高麗大學校 行政問題硏究所 1992 行政과 政策 Vol.- No.1

안내관류액내 저분자 dextran이 망막에 미치는 영향

김시열 최신의학사 1985 最新醫學 Vol.28 No.8

鞏膜突隆의 新素材-PVA gel

金時烈 최신의학사 1985 最新醫學 Vol.28 No.8

백서 척수후근절로부터 슈반세포의 효과적인 체외 배양법

김성민,이종호,김남열,안강민,최원재,최시호,차미주,이주영,황순정,장정원,명훈,최진영,서병무,정필훈,김명진 大韓顎顔面成形再建外科學會 2003 Maxillofacial Plastic Reconstructive Surgery Vol.25 No.4

Schwann cells(SCs), an important component of the peripheral nervous system, intract with nerous to mutually support growth and replication for the peripheral nerve regentation. Recently, ading SCs to the lumen of guidance channel is widely tried to improve regeneration or to make regeneration possible over otherwise irreparable gaps. however, it is not easy to isolate and multiplicate SCs as much as enough to help the axonal regeneration. For the allogeneic SCs source for tubular nerve guidance, we developed a little bit improved technique of harvesting and multiplicating SCs. by culturing dispersed dorsal root ganglia in specially designed medium with growth factors and serial processing, we repeatedlly generate relatively homogenous SC cultures. Our technique was compared with other methods of literature using immunostaining methods such as GFAP, S100, BDNF and the total SC count assessment at different time interval after primary culture.

전립선암에 대한 초음파 영상유도 방사선치료의 Setup 오차 분석을 통한 재현성 평가

박성용,임승규,시명근,이지해,김종열,조은주,Park, Sung Yong,Lim, Seung Kyu,Si, Myoung Geun,Lee, Ji Hae,Kim, Jong Yeol,Cho, Eun Joo 대한방사선치료학회 2017 대한방사선치료학회지 Vol.29 No.2

목 적: 전립선암 환자에 대한 비침습적이고 피폭선량에 대한 부담이 없는 초음파를 이용한 영상유도방사선치료의 Setup 오차 분석을 통해 치료의 재현성을 평가해 보고자 한다. 대상 및 방법: 치료가 종료된 전립선암 환자 26명의 1,105영상에 대하여 앞-뒤(anterior-posterior, AP), 좌-우(right-left, RL), 위-아래(superior-inferior, SI) 방향의 Setup 오차에 대해 평균, 표준편차와 3D-error을 분석하였다. 또한 오차범위 0-1 mm, 1-3 mm, 3-5 mm, 5 mm 이상에 대한 각 오차 빈도수(frequency, %) 분석을 통하여 AP, RL, SI 방향에 대한 방향성을 확인 하였다. 결 과: Setup 오차는 AP, RL, SI 방향에 대하여 평균과 표준편차는 $1.87{\pm}1.36mm$, $1.73{\pm}1.22mm$, $2.01{\pm}1.40mm$였다. 3D-error는 평균 $3.63{\pm}1.63mm$였다. 각 방향에 대한 Setup 오차값의 빈도(frequency, %)는 AP 방향에 대한 오차범위 0-1 mm에서 29 %, 1-3 mm에서 50.2 %, 3-5 mm에서 19.6 %, 5 mm 이상에서 1.3 %였다. RL 방향에 대하여 오차범위 0-1 mm에서 31.3 %, 1-3 mm에서는 52.5 %, 3-5 mm에서는 15.8 %, 5 mm 이상에서 0.5 %였다. 마지막으로 SI 방향에 대한 오차범위 0-1 mm에서 26.3 %, 1-3 mm에서 50.2 %, 3-5 mm에서 22.4 %, 5 mm 이상에서 1.1 %였다. 결 론: Setup error는 SI 방향에서 $2.01{\pm}1.40mm$로 가장 컸으며 오차 빈도는 모든 방향에서 50 % 이상 오차 범위 1-3 mm에 들어온 것으로 확인되었다. $Clarity^{TM}$ Auto scan을 이용한 초음파영상유도 방사선치료는 치료 전에 방광의 전처치 상태, target의 구조 등을 관찰이 가능하고, 치료 중 target의 움직임을 실시간으로 monitoring하여 빠른 repositioning이 가능하다. 결과적으로 초음파를 이용한 실시간 영상유도방사선치료는 치료의 재현성을 높일 수 있을 것으로 사료된다. Purpose: To evaluate the reproducibility of image-guided radiotherapy using ultrasonography which is non-invasive, without radiation exposure for prostate cancer patients. Materials and Methods: We analyzed the setup variation of 1,105 images for 26 prostate cancer patients and the mean, standard deviation and 3D-error in AP, RL and SI directions. Setup variations were classified 0-1 mm, 1-3 mm, 3-5 mm, 5 mm and more. Results: The mean and standard deviation of setup variation in AP, RL and SI directions was $1.87{\pm}1.36mm$, $1.73{\pm}1.22mm$ and $2.01{\pm}1.40mm$. The 3D-error in AP, RL and SI directions was $3.63{\pm}1.63mm$. The frequency of setup variation in AP direction was 29 % in the range from 0 mm to 1 mm, 50.2 % in the range from 1 mm to 3 mm, 19.6 % in the range from 3 mm to 5 mm and 1.3 % in the range of 5 mm or more. In RL direction, the frequency was 31.3 % in the range from 0 mm to 1 mm, 52.5 % in the range from 1 mm to 3 mm, 15.8 % in the range from 3 mm to 5 mm and 0.5 % in the range of 5 mm or more. SI direction, the frequency of errors in the range from 0 mm to 1 mm was 26.3 %, 50.2 % in the range from 1 mm to 3 mm, 22.4 % in the range from 3 mm to 5 mm, and 1.1 % in the range of 5 mm or more. Conclusion: The setup error was highest in the SI direction of $2.01{\pm}1.40mm$. The frequency in each direction was the highest in more than 50 % in the range from 1 mm to 3 mm. $Clarity^{TM}$ Auto scan is possible to monitoring the motion of the prostate during the treatment and to repositioning the patient. In conclusion real-time image-guided radiotherapy using ultrasonography will be increase the reproducibility of radiation therapy.

Development of field corn varieties for adaptation of Primorsky Krai in Russia

Si-Hwan Ryu,Ki-Jin Park,Jong-Yeol Park,Eun-Ha Jang,Young-Ho Seo,Woo-Sik Yong,Sang-Min Lee,Kyung-Hee Kim 한국육종학회 2013 한국육종학회 심포지엄 Vol.2013 No.07

We are importing corn grains more than eight million tons every year, and self-sufficiency rate of corn is less than one percent. It is not easy to increase field corn production in Korea because of limited arable land. For this reason, many companies have been interesting overseas agriculture for corn production. But they don’t have enough suitable variety for the target area. Our objective is to develop field corn varieties for adaptation in Primorsky Krai which is the southeasternmost region of Russia. This project has been collaborated with Dr. Huk-Ha Lee in Seoul National Univ. and planted three times in Primorsky Krai since 2011. Planting materials for this project were developed in Maize Research Institute. 74 hybrids in 2011, 76 in 2012, and 80 in 2013 were planted for regional performance test. Primorsky Krai is a colder area and has less frost-free days than Korea. Several hybrids have shown good performance, but lots of materials developed in Korea could not fully ripened in 2011 because of late planting and early frost. In 2012, we mainly selected early flowering materials as well as picked materials from first year. The silking date of our materials was later than local commercial varieties, but some our hybrids had good characteristics and high yield. Among them, we picked two hybrids and planted them in Ussuriysk in Primorsky Krai for field demonstration test. We expect some of the selected hybrids can be candidate varieties for improvement of corn production at overseas agricultural production base.