Role of active and passive smoking in high-risk human papillomavirus infection and cervical intraepithelial neoplasia grade 2 or worse

Rui-Mei Feng,Shang-Ying Hu,Fang-Hui Zhao,Rong Zhang,Xun Zhang,Asya Izraelit Wallach,You-Lin Qiao 대한부인종양학회 2017 Journal of Gynecologic Oncology Vol.28 No.5

Objective: We performed a pooled analysis to examine cigarette smoking and householdpassive smoke exposure in relation to the risk of human papillomavirus (HPV) infection andcervical intraepithelial neoplasia grade 2+ (CIN2+). Methods: Data were pooled from 12 cross-sectional studies for cervical cancer screeningsfrom 10 provinces of China in 1999–2007. A total of 16,422 women were analyzed, alongwith 2,392 high-risk-HPV (hr-HPV) positive women and 381 CIN2+ cases. Pooled odds ratios(ORs) and 95% confidence intervals (CIs) were estimated using logistic regression modelscontrolling for sexual and non-sexual confounding factors. Results: There was an excess risk between active smoking and hr-HPV infection and CIN2+. Adjusted OR for ever smokers vs. never smokers was 1.45 (95% CI=1.10–1.91), for hr-HPVinfection and 1.89 (95% CI=1.03–3.44), for CIN2+. Passive smoking had a slightly increasedrisk on the hr-HPV infection with adjusted OR 1.11 (1.00–1.24), but no statistical associationwas observed between passive smoke exposure and CIN2+. Compared with the neither activenor passive smokers, both active and passive smokers had a 1.57-fold (95% CI=1.14–2.15)increased risk of HPV infection and a 1.99-fold (95% CI=1.02–3.88) risk of CIN2+. Conclusion: Our large multi-center cross-sectional study found active smoking couldincrease the risk of overall hr-HPV infection and CIN2+ adjusted by passive smoking andother factors. Passive smoking mildly increased the risk of HPV infection but not the CIN2+. An interaction existed between passive tobacco exposure and active smoking for hr-HPVinfection and the CIN2+.

Quality improvement effects of electrolyzed water on rice noodles prepared with semidry-milled rice flours

Rui Liu,Zhang-Long Yu,Yuan-Lin Sun,Li-Tao Tong,Li-Ya Liu,Li-Li Wang,Xian-Rong Zhou,Su-Mei Zhou 한국식품과학회 2021 Food Science and Biotechnology Vol.30 No.6

To investigate the effects of electrolyzed watertreatment on the qualities of rice noodles prepared withsemidry- milled rice flour, pasting properties and thermalproperties of rice flour, and the cooking and texturalproperties of rice noodles were determined. Higher peakviscosity and lower melting enthalpy were observed inelectrolyzed water (EW) treated rice flour. The hardness,gumminess and chewiness of rice noodle in slightly acidicelectrolyzed water treated rice noodles with availablechlorine concentration (ACC) 20.32 mg/L were increasedsignificantly (p\0.05). The cooking loss decreased significantlyin strong acidic electrolyzed water treated noodleswith ACC 10.09 mg/L treatment (p\0.05). Theresults indicated that EW could promote the gelatinizationof rice flour, and improve the textural qualities of ricenoodles. Therefore EW was appropriate to be used in ricenoodle production.

Generating Radiology Reports via Multi-feature Optimization Transformer

Rui Wang,Rong Hua 한국인터넷정보학회 2023 KSII Transactions on Internet and Information Syst Vol.17 No.10

As an important research direction of the application of computer science in the medical field, the automatic generation technology of radiology report has attracted wide attention in the academic community. Because the proportion of normal regions in radiology images is much larger than that of abnormal regions, words describing diseases are often masked by other words, resulting in significant feature loss during the calculation process, which affects the quality of generated reports. In addition, the huge difference between visual features and semantic features causes traditional multi-modal fusion method to fail to generate long narrative structures consisting of multiple sentences, which are required for medical reports. To address these challenges, we propose a multi-feature optimization Transformer (MFOT) for generating radiology reports. In detail, a multi-dimensional mapping attention (MDMA) module is designed to encode the visual grid features from different dimensions to reduce the loss of primary features in the encoding process; a feature pre-fusion (FP) module is constructed to enhance the interaction ability between multi-modal features, so as to generate a reasonably structured radiology report; a detail enhanced attention (DEA) module is proposed to enhance the extraction and utilization of key features and reduce the loss of key features. In conclusion, we evaluate the performance of our proposed model against prevailing mainstream models by utilizing widely-recognized radiology report datasets, namely IU X-Ray and MIMIC-CXR. The experimental outcomes demonstrate that our model achieves SOTA performance on both datasets, compared with the base model, the average improvement of six key indicators is 19.9% and 18.0% respectively. These findings substantiate the efficacy of our model in the domain of automated radiology report generation.

Temperature distribution prediction in longitudinal ballastless slab track with various neural network methods

Rui Zhou,Hanlin Liu,Wenhao Yuan,Yanliang Du,Jingmang Xu,Rong Chen 국제구조공학회 2023 Smart Structures and Systems, An International Jou Vol.32 No.2

The temperature prediction approaches of three important locations in an operational longitudinal slab track-bridge structure by using three typical neural network methods based on the field measuring platform of four meteorological factors and internal temperature. The measurement experiment of four meteorological factors (e.g., ambient temperature, solar radiation, wind speed, and humidity) temperature in the three locations of the longitudinal slab and base plate of three important locations (e.g., mid-span, beam end, and Wide-Narrow Joint) were conducted, and then their characteristics were analyzed, respectively. Furthermore, temperature prediction effects of three locations under five various meteorological conditions are tested by using three neural network methods, respectively, including the Artificial Neural Network (ANN), the Long Short-Term Memory (LSTM), and the Convolutional Neural Network (CNN). More importantly, the predicted effects of solar radiation in four meteorological factors could be identified with three indicators (e.g., Root Means Square Error, Mean Absolute Error, Correlation Coefficient of R2). In addition, the LSTM method shows the best performance, while the CNN method has the best prediction effect by only considering a single meteorological factor.

An Improved Variable Step Size MPPT Algorithm Based on INC

Zhi-rong Xu,Ping Yang,Dong-bao Zhou,Peng Li,Jin-yong Lei,Yuan-rui Chen 전력전자학회 2015 JOURNAL OF POWER ELECTRONICS Vol.15 No.2

In order to ensure that photovoltaic (PV) systems work at the maximum power point (MPP) and maximize the economic benefits, maximum power point tracking (MPPT) techniques are normally applied to these systems. One of the most widely applied MPPT methods is the incremental conductance (INC) method. However, the choice of the step size still remains controversial. This paper presents an improved variable step size INC MPPT algorithm that uses four different step sizes. This method has the advantages of INC but with the ability to validly adjust the step size to adapt to changes of the PV’s power curve. The presented algorithm also simultaneously achieves increased rapidity and accuracy when compared with the conventional fixed step size INC MPPT algorithm. In addition, the theoretical derivation and specific applications of the proposed algorithm are presented here. This method is validated by simulation and experimental results.

Hyperproduction of exopolysaccharides by submerged mycelial culture of Ganoderma lucidum using a solid seed grown in finepowder of wheat bran and in vitro evaluation of the antioxidant activity of the exopolysaccharides produced

Sheng-Rong Liu,Wei-Rui Zhang 한국식품과학회 2018 Food Science and Biotechnology Vol.27 No.4

To facilitate Ganoderma lucidum submerged culture and obtain high productivity, a fine powder of wheat bran was used to grow the fungus for solid-state fermentation and as solid seed for its submerged cultures. The results indicated that the optimal inoculum size was low, being 0.75 g in 250 mL-sized flasks containing 80 mL medium. The maximal exopolysaccharide concentration and biomass produced was 0.74 and 14.71 g/L, respectively, which is considerably higher than that obtained with the commonly used mycelial pellet liquid seed (0.47 and 8.56 g/L, respectively). The EPS and biomass productivity of the solid seed cultures decreased only slightly, even after a 6-month storage period. EPS produced showed higher antioxidant activity compared with that produced in the liquid seed cultures. The developed solid seed can serve as a ready-to-use inoculum for long-term use in G. lucidum submerged culture for the hyperproduction of highly bioactive EPS and biomass.

Optimization of submerged culture conditions involving a developed fine powder solid seed for exopolysaccharide production by the medicinal mushroom Ganoderma lucidum

Sheng-Rong Liu,Wei-Rui Zhang 한국식품과학회 2019 Food Science and Biotechnology Vol.28 No.4

To facilitate Ganoderma lucidum submergedcultivation and achieve high productivity, four fine powdersolid substrates incorporated with different nitrogen-richsupplements were utilized to grow the fungus and as solidseed for its submerged culture. Of the four solid seeds, thesoybean meal solid seed gave the highest biomass (10.73 g/L) and exopolysaccharide (EPS) (1.22 g/L), higher thanthose (8.36 g/L biomass and 0.44 g/L EPS) obtained withmycelial liquid seed. The optimal level of soybean mealsupplementation was 20% (w/w) for production of the solidseed. Following single factor experiments, levels of threeselected process variables were optimized as: the moisturecontent of solid seed, 70%; inoculum size, 0.8 g/flask; androtary speed, 160 rpm. These conditions were validatedexperimentally with improved EPS yield of 1.33 g/L. Thedeveloped solid seed can be conveniently used for G. lucidumsubmerged culture with improved EPS productivity.

An Epigenetic Mechanism Underlying Doxorubicin Induced EMT in the Human BGC-823 Gastric Cancer Cell

Han, Rong-Fei,Ji, Xiang,Dong, Xing-Gao,Xiao, Rui-Jing,Liu, Yan-Ping,Xiong, Jie,Zhang, Qiu-Ping Asian Pacific Journal of Cancer Prevention 2014 Asian Pacific journal of cancer prevention Vol.15 No.10

The epithelial to mesenchymal transition (EMT) is a key step during embryonic morphogenesis and plays an important role in drug resistance and metastasis in diverse solid tumors. We previously reported that 48 h treatment of anti-cancer drug doxorubicin could induce EMT in human gastric cancer BGC-823 cells. However, the long term effects of this transient drug treatment were unknown. In this study we found that after 48 h treatment with $0.1{\mu}g/ml$ doxorubicin, most cells died during next week, while a minor population of cells survived and formed colonies. We propagated the surviving cells in drug free medium and found that these long term cultured drug survival cells (abbreviated as ltDSCs) retained a mesenchymal-like cell morphology, and expressed high levels of EMT-related molecules such as vimentin, twist and ${\beta}$-catenin. The expression of chromatin reprogramming factors, Oct4 and c-myc, were also higher in ltDSCs than parental cells. We further demonstrated that the protein level of p300 was upregulated in ltDSCs, and inhibition of p300 by siRNA suppressed the expression of vimentin. Moreover, the ltDSCs had higher colony forming ability and were more drug resistant when compared to parental cells. Our results suggested that an epigenetic mechanism is involved in the EMT of ltDSCs.

Experimental and Numerical Research on Process Formability in Magnetic Pulse Forming of AZ31 Magnesium Alloy Sheets

Jun-Rui Xu,Jun-Jia Cui,Guangyong Sun,Yan-Rong Li,Chun-Feng Li 한국정밀공학회 2015 International Journal of Precision Engineering and Vol. No.

The plain strain of AZ31 magnesium alloy sheet in magnetic pulse forming was investigated by numerical simulation and experimental method. Combination of uniform pressure coil and Holmberg's specimen was employed to evaluate the plain strain of AZ31 sheet. The numerical simulation for magnetic pulse plain strain of AZ31 sheet is performed by means of ANSYS FEA software. The magnetic flux density of uniform pressure coil was distributed uniformly, especially at the center of gauged area of AZ31 sheet directly in relation to the deformation behavior of AZ31 sheet. The velocity of typical point increases as increasing energy, and the more position closes to the center of sheet the higher velocity achieves. The forming height is increased with increasing discharge voltage. Compared with C=768 μF and C=1536 μF, the capacitance of 1152 μF is more effective for forming, which is confirmed by experiments. The peak velocity at the center of sheet is about 105 m/s. The major strains of magnetic pulse plane strain lie approximately in the strain ranges of 5.83-6.45%. However, the 3.22-3.82% (major strain) are the limit strains in quasi-static condition. The experimental results indicate that the major strain of AZ31 sheet improves about 75% compared with the quasi-static case.

Luciferase Assay to Screen Tumour-specific Promoters in Lung Cancer

Xu, Rong,Guo, Long-Jiang,Xin, Jun,Li, Wen-Mao,Gao, Yan,Zheng, You-Xian,Guo, You-Hong,Lin, Yang-Jun,Xie, Yong-Hua,Wu, Ya-Qing,Xu, Rui-An Asian Pacific Journal of Cancer Prevention 2013 Asian Pacific journal of cancer prevention Vol.14 No.11

Objective: Specific promoters could improve efficiency and ensure the safety of gene therapy. The aim of our study was to screen examples for lung cancer. Methods: The firefly luciferase gene was used as a reporter, and promoters based on serum markers of lung cancer were cloned. The activity and specificity of seven promoters, comprising CEACAM5 (carcinoembryonic antigen, CEA), GRP (Gastrin-Releasing Peptide), KRT19 (cytokeratin 19, KRT), SFTPB (surfactant protein B, SP-B), SERPINB3 (Squamous Cell Carcinoma Antigen, SCCA), SELP (Selectin P, Granule Membrane Protein 140kDa, Antigen CD62, GMP) and DKK1 (Dickkopf-1) promoters were compared in lung cancer cells to obtain cancer-specific examples with strong activity. Results: The CEACAM5, DKK1, GRP, SELP, KRT19, SERPINB3 and SFTPB promoters were cloned. Furthermore, we successfully constructed recombinant vector pGL-CEACAM5 (DKK1, GRP, SELP, KRT19, SERPINB3 and SFTPB) contained the target gene. After cells were transfectedwith recombinant plasmids, we found that the order of promoter activity from high to low was SERPINB3, DKK1, SFTPB, KRT19, CEACAM5, SELP and GRP and the order for promoters regarding specificity and high potential were SERPINB3, DKK1, SELP, SFTPB, CEACAM5, KRT19 and GRP. Conclusion: The approach adopted is feasible to screen for new tumour specific promoters with biomarkers. In addition, the screened lung-specific promoters might have potential for use in lung cancer targeted gene therapy research.