http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
The Reaction of 4,4′-Dihydroxydiphenyl Methane with Glycidyl Methacrylate
Pyun, Hyung-Chick,Park, Wan-Bin,Sung, Ki-Woung,Choi, Kyu-Suck Korean Nuclear Society 1979 Journal of The Korean Nuclear Society Vol.11 No.2
전자선경화성 prepolymer를 합성하기 위해서 4,4'-Dihydroxydiphenyl methane (4,4'-DPM) 과 메타크릴산 글리시딜 (GMA)과의 반응을 염화벤질 트리에틸 암모늄(TEBAC)을 촉매로 하여 진행시키고 그 반응 메카니즘을 고찰하였다. 반응은 3차 속도식 진행시키고 그 반응 메카니즘을 고찰하였다. 반응은 3차 속도식 (equation omitted) 에 해당하였고 활성화 에너지는 33.4kca1/mole 이었다. 그러나 혼합물을 상온에서 24시간 방치한 후의 반응은 빠른 속도로 진행되었다. 촉매효과 및 2,2'-DPM 과 4,4'-DPH의 GMA에 대한 반응성을 비교 검토하였다. 얻어진 데이타를 기초로 하여 가능한 반응기구를 제시하였다.
Effect of Trifunctional Monomers and Antioxidants on the Crosslinking Reaction of Polyethylene
Hyung Chick Pyun,Young Chul Lee,Kil Jeong Kim,Byung Mok Yoon Korean Nuclear Society 1982 Nuclear Engineering and Technology Vol.14 No.2
전자선을 이용하여 저밀도 폴리에틸렌을 가교시킬때의 삼관능성 단위체와 산화방지제의 효과를 검토하였다. 가교촉진제로서는 삼관능성 단량체인 Trimethylolpropane triacrylate(TMPTA), Trimethylolpropane trimethacrylate(TMPTM)과 Triallyl cyanurate(TAC)가 사용되었고, 산화방지제로서는 Irganox 1010(Pentaerythritol-tetrakist[3-(3,5-di-t-butyl-4-hydroxyphenyl)-propionate]), Santo-nox R(4,4'-Thio-bis(3-methyl-6-t-butylphenol)), Nocrac D(N-phenyl-$\beta$-naphthylamine)와 Bisphenol A(4,4'-Iso-propylidene bisphenol)가 사용되었다. 삼관능성 단위체중에서 TMPTA가 폴리에틸렌의 가교도를 제일 크게 높였으며 또한 산화안정성도 부여했다. 산화방지제중에서 Nocrac D가 폴리에틸렌에 가장 적당한 것으로 나타났다. The crosslinking reaction and oxidative stability of low-density polyethylene were studied in the presence of trifunctional monomers and antioxidants with electron beam. The trifunctional monomers used in this study are Trimethylolpropane triacrylate(TMPTA), Trimethylolpropane trimethacrylate(TMPTM) and Triallyl cyanurate(TAC). And the antioxidants are Irganox 1010 (Pentaerythritoltetrakis[3-(3,5-di-t-butyl-4-hydroxyphenyl)-propionatel]), Santo-nox R(4,4'-Thio-bis(3-methyl-6-t-butylphenol)), Nocrac D(N-phenyl-$\beta$-naphthylamine) and Bis-phenol A(4,4'-Isopropylidene bisphenol). Among the monomers, TMPTA is the best crosslinking agent and prvides polyethylene with oxidative stability. Among the antioxidants, Nocrac D is the best antioxidant for polyethylene.
Studies on the Preparation of Mortar-Plastic Composite
Pyun, Hyung-Chick,Lee, Kyung-Hee Korean Nuclear Society 1974 Nuclear Engineering and Technology Vol.6 No.2
단량체로서 Styrene, Methyl methacrylate 및 Vinyl acetate를 사용한 몰탈-플라스틱 복합체 제법에 관하여 검토하였다. 경화법으로서는 방사선, 열-촉매 및 방사선-촉매 방법을 사용하였다. 상기한 단량체 및 중합방법은 모두 복합체 제조에 사용이 가능하였다. 열-촉매 방법이 중합에 가장 적은 시간을 요하였으나 이 방법에 의한 제품의 곤장강도는 방사선에 의한 제품에 비하여 열등하였다. 플라스틱을 약 10%까지 함유시킬 구 있었으며 이렇게 하므로서 처리치 않은 몰탈에 비해 약 10배의 내산성 및 인장강도 등의 성질향상이 가능하였다. 이 성질의 향상은 콘크리트-플라스틱 복합체에 있어서 보다 훨씬 컸었다.
Pyun, Hyung-Chick,Lee, Kyung-Hee,Kim, Jaerok Korean Nuclear Society 1973 Nuclear Engineering and Technology Vol.5 No.2
General physical properties and radiation durabilities of some domestic woods and imported lauans were measured and discussed as a preliminary study on the preparation of W. P. C. The data obtained indicate that 1) the hardness of wood is generally proportional to the specific gravity and to the bending strength, 2) the hardness of wood measured in tangential direction to the annual ring increases along with the distance from the center of the annual ring to the peel, 3) the changes of specific gravity under 100 Mrad gamma irradiation are not remarkable, 4) the hardnesses of the soft woods are decreased more -readily than those of the hard woods, but the decreases of hardnesses are not extreme upto 10 Mrad sugges ting that the woods are sufficiently durable to gamma irradiation of below 10 Mard in the preparation of W. P. C.
The Reaction of 4,4′-Dihydroxydiphenyl Methane with Glycidyl Methacrylate
Pyun, Hyung-Chick,Park, Wan-Bin,Sung, Ki-Woung,Choi, Kyu-Suck Korean Nuclear Society 1979 Nuclear Engineering and Technology Vol.11 No.2
전자선경화성 prepolymer를 합성하기 위해서 4,4'-Dihydroxydiphenyl methane (4,4'-DPM) 과 메타크릴산 글리시딜 (GMA)과의 반응을 염화벤질 트리에틸 암모늄(TEBAC)을 촉매로 하여 진행시키고 그 반응 메카니즘을 고찰하였다. 반응은 3차 속도식 진행시키고 그 반응 메카니즘을 고찰하였다. 반응은 3차 속도식 (equation omitted) 에 해당하였고 활성화 에너지는 33.4kca1/mole 이었다. 그러나 혼합물을 상온에서 24시간 방치한 후의 반응은 빠른 속도로 진행되었다. 촉매효과 및 2,2'-DPM 과 4,4'-DPH의 GMA에 대한 반응성을 비교 검토하였다. 얻어진 데이타를 기초로 하여 가능한 반응기구를 제시하였다. The reaction of 4,4'-dihydroxydiphenl methane (4,4'-DPM) with glycidyl methacrylate (GMA) catalyzed by triethylbenzyl ammonium chloride (TEBAC) has been studied for the purpose of synthesis of electron beam curable prepolymer. The reaction was in good agreement with third-order kinetics. according to -d[GMA]/dt=k[TEBAC][DPM][GMA] and the apparent activation energy was about 33.4kca1/mole. However, the reaction rates were increased if tile reaction proceeded after the mixtures exposed to air for 24 hrs at room temperature. The effects of the catalyst and the difference in the reactivity between 2.2'-DPM to GMA were discussed. The plausible reaction mechanism was proposed on basis of experimental data obtained.
Preparation of Slate-Plastic Composite
Pyun, Hyung-Chick,Cho, Bong-Rae,Kwon, Suk-Keun Korean Nuclear Society 1975 JOURNAL- KOREAN NUCLEAR SOCIETY Vol.7 No.1
슬레이트에 단량체 methyl methacrylate를 침투시키고 감마선 및 촉매 가열법으로 중합시켜 슬레이트-플라스틱 복합체를 제조하였다. 제품의 성질은 휨강도, 내수성 내산성등에 현저한 증가를 나타내었으며, 중합조건에 의한 차이점도 그 원인과 함께 비교 검토하였다. Slate-plastic composite was prepared by impregnating methyl methacrylate monomer into the slate and subsequent curing the monomer either by gamma radiation or by thermal-catalytic method. Experiments were carried out to determine the polymerization rate and to investigate the properties of the composite. Significant improvements in flexural strength, water absorbability and acid resistance were observed in the products. Differences in properties between the composites obtained via two different methods were discussed as well as the cause of such results.
Pyun, Hyung-Chick,Kim, Jae-Rok,Lee, Kyung-Hee Korean Nuclear Society 1972 Nuclear Engineering and Technology Vol.4 No.1
A study on the preparation of wood-plastic combinations by gamma-ray induced polymerization is carried out. In monomer impregnation, the rates and amounts are determined for various woods. The polymerization rates of various monomers and monomer mixtures impregnated mainly domestic woods are studied varying the total gamma-dose and gamma-dose rates. The obtained data indicate that; 1) in impregnation of monomer, populus deltoides is the fastest in rate, and the most impregnated in amount 2) the general trends of polymerization of monomers ill woods is in the order of vinyl acetate--methyl metacrylate--styrene, ranging from 3 to 15 Mard of total does in rate of 4$\times$10$^4$rad/hr., thus vinyl acetate or methyl metacrylate is suitable monomer in view of polymerization rate, 3) the successful woods in combination with monomer are pinus rigida and pinus densiflora in view of polymerization rate, 4) the monomers in woods are more easily polymerized under the conditions of moderately lower does rate, 2.1$\times$10$^4$rad/hr.