분사법에 의한 탄산칼슘 제조

신보철,한상오,김주호,송지훈,송근호,이광래 강원대학교 석재복합신소재제품연구센터 2001 석재연 논문집 Vol.6 No.-

본 연구는 탄산가스화법에 의한 탄산칼슘 입자 제조 공정에 있어서, 탄산가스로 채워진 반응기에 수산화칼슘 슬러리를 분사하는 방법으로 탄산칼슘 입자를 제조하였다. 수산화 칼슘의 농도(0.25~1.0wt%), 분사압력(0.5kgf /㎠~1.5kgf /㎠) 및 반응기 온도(20℃, 28℃)의 변화에 따른 생성된 탄산칼슘을 관찰하였다. 수산화 칼슘의 농도가 비교적 높으면(0.75wt%, 1.0wt%), 생성물의 pH와 전도도는 높게 나타났다. 분사압력에 의한 탄산칼슘 제조의 변화는 분사압력이 높아질수록(1.5kgf /㎠), pH와 전도도는 높게 측정되었다. 그러나, 수산화 칼슘의 농도와 분사압력의 변화가 탄산칼슘의 입자크기, 형태, 결정구조에 영향을 미치지는 않았다. 반응기의 온도가 28℃에서 생성된 탄산칼슘은 1.0㎛이하의 칼사이트 상 입자가 제조되었으며, 20℃에서 생성된 탄산칼슘은 0.5㎛이하의 칼사이트 상 입자가 제조되었다. 반응기의 온도가 낮아질수록 탄산칼슘 입자의 크기가 작아짐을 알 수 있었다. For the preparation of calcium carbonate particles from aqueous Ca(OH)2 slurry, carbonation reaction of aqueous Ca(OH)2 slurry was carried out by spouting the aqueous slurry of Ca(OH)2 into reactor filled with CO2 gas. The concentration of Ca(OH)2 varies from 0.25wt% to 1.0wt%, nozzle pressure from 0.5kgf /㎠ to 1.5kgf /㎠, and reactor temperature were set at 20℃ and 28℃. With relatively high concentration of 0.75wt% and 1.0wt% of Ca(OH)2, pH and conductivity of product-stream were observed high value. High pH and conductivity were observed at high nozzle pressure of 1.5kgf /㎠. The concentration of Ca(OH)2 and nozzle pressure, however, did not change the particle size and shape of calcium carbonate synthesized by carbonation reaction. The reaction temperature affected particle size. At reactor temperatures of 28℃ and 20℃, the particle sizes were about 1.0㎛ and 0.5㎛, respectively. Crystal structure of calcium calcium carbonate was of calcite. When reactor temperature was lower, the size of calcium carbonate particle was smaller.

직업 유무와 진균 감염

오상철,홍성호,조주연 순천향대학교 교수학습개발센터 2004 Journal of Soonchunhyang Medical Science Vol.10 No.3

Back ground : This study was designed to evaluate the relation fungal infection with the males and females with/without occupation and to evaluate cause of fungal infection Methods : This study was done via direct interview and KOH mount with 03 patients who are oupatients in a university hospital from July 2000 to Aprill 2001. They were divided into three groups, males with occupation, females with occupation, females withoup occupation and sudied by sex, age, duration, types of dermatophytosis, site of infection, infection in families. Results : The results were as follows 1. Fungal infection was 40% in males with occupation, 24% in females with occupation, 36% in females without occupation. 2. The site of fungal infection was the offices(42.5%), the families(30%) in men with occupation and the families(54.2%), the offices (41.7%) in females with occupation and the families(72%), the others(11.1%) in females withoup occupation. 3. The members of the families were the spouses(32.5%), the parents or children(32.5%) in men with occupation and the spouses(41.7%), the parents or children(25.0%) in females with occupation and the spouses(69.4%), the parents or children(13.9%) in females without occupation. Conclusions : In our study, the results showed no difference in the fungal infections among males with occupation, females with occupation and females without occupation. Fungal infection of females without occupation was spread in the families and by the pouse among the members of the families

Is there internal structure in syllable? : with reference to English and Korean

吳尙能 忠州大學校 1999 한국교통대학교 논문집 Vol.34 No.1

E-M을 이용한 개선된 혼합영상의 분리

오범진,김성수,유정웅 충북대학교 컴퓨터정보통신 연구소 2002 컴퓨터정보통신연구 Vol.10 No.2

이 논문에서는, 기존의 독립성분해석기법 이노베이션을 이용한 혼합영상분리의 기법을 EM알고리즘을 첨가하여 새롭게 향상된 혼합영상분리 방법을 제안한다. 독립성분해석기법은 통계적으로 독립된 랜덤변수들의 선형조합으로 측정대상 랜덤신호를 표기하는 여러 통계신호처리 기법 중의 하나로, 정보의 분리, 특징 추출 등의 응용분야에 적용되고 있다. 기술적으로는, 독립성분기법은 주성분 분리기법의 확장이라 볼 수 있고, 근래에 혼합정보의 분리에 관련하여 많이 연구되고 있다. 현재까지의 연구 결과로는 혼합영상의 분리에 있어 독립성분해석기법만으로는 혼합영상분리의 해를 얻지 못하고 있다. 이러한 독립성분해석기법의 약점을 보완하는 방법으로, 최근에 이노베이션 프로세서를 전처리로 하는 독립성분해석기법을 혼합한 시스템을 이용한 혼합영상 분리가 시도되었다. 이노베이션 프로세서를 전처리로 첨가한 혼합영상분리의 과정도 독립성분해석기법만을 사용한 경우 보다는 향상된 혼합영상분리를 하지만, 분류된 영상들이 원래의 혼합 전의 영상과 많이 다른 결과를 내고 있다. 기존의 방법들인 독립성분해석기법이나 이노베이션이 전처리로 적용된 경우에도 혼합이전의 영상간의 상관관계가 클 경우, 혼합영상의 분류가 잘 이루어지지 않는다. 본 논문에서는 이 약점을 보완하기 위하여, EM이론을 기존의 시스템에 전처리로 첨가하여 혼합 영상의 분리를 향상시키고자 하였다. 실험 결과에서는 최근에 연구된 이노베이션의 방법보다 EM을 적용시킨 경우가 향상된 혼합영상의 분리의 결과를 보여 주고 있다. In this paper, a new method for the improvement of mixed image separation scheme is presented adding the expectation-maximization algorithm to the scheme consists of the independent component analysis and the innovation process. In general, the independent component analysis (ICA) is one of the widely used statistical signal processing schemes, which represents the information from observations as a set of random variables in the form of linear combinations of another statistically independent component variables. In various useful applications, ICA provides a more meaningful representation of the data than the principal component analysis through the transformation of the data to be quasi-orthogonal to each other, which can be utilized in linear projection. However, it has been known that ICA does not establish good performance in source separation by itself. Thus, in order to overcome this limitation, there have been many techniques that are designed to reinforce the good properties of ICA. The innovation process is one of the methods that were employed in image separation using ICA, which improves the mixed image separation. Unfortunately, the innovation process still needs to be studied since it yields inconsistent result due to the randomness of images mixing weights. In order to improve the performance of the conventional method, the expectation and maximization process is added to the system. The results presented in this paper show that the proposed improves the image separation as presented in experiments.

獨島 周邊 海域의 집게類

吳相哲 제주교육대학교 2001 論文集 Vol.30 No.-

압력용기의 설계기준 및 손상 평가

오환섭,정효진,박상필,손두익 한국공작기계학회 2005 한국공작기계학회 춘계학술대회논문집 Vol.2005 No.-

The damage of the pressure courage by degradation can become the reason of unexpected break down or failure accident and it is very important because safety accident, the production loss, environmental pollution, social problems are occur. Consequently The result to investigat of failure accident for domestic pressure vessel, the factor of degradation is SCC, Sorrosion, Cavity, Crack

유전자 알고리즘 기반 퍼지 다항식 뉴럴네트워크의 설계

吳聖權,李寅太,金完洙 水原大學校 2005 論文集 Vol.23 No.-

In this paper we propose a new architecture of Fuzzy Polynomial Neural Networks(FPNN) by means of genetically optimized Fuzzy Polynomial Neuron(FPN) and discuss its comprehensive design methodology involving mechanisms of genetic optimization. especially Genetic Algorithms (GAs). The conventional FPNNs developed so far are based on mechanisms of self-organization and evolutionary optimization. The design of the network exploits the extended Group Method of Data Handling(GMDH) with some essential parameters of the network being provided by the designer and kept fixed throughout the overall development process. This restriction may hamper a possibility of producing an optimal architecture of the model The proposed FPNN gives rise to a structurally optimized network and comes with a substantial level of flexibility in comparison to the one we encounter in conventional FPNNS. It is shown that the proposed genetic algorithms-based Fuzzy Polynomial Neural Networks is more useful and effective than the existing models for nonlinear process. We experimented with Medical Imaging System(MIS) dataset to evaluate the performance of the proposed model.

Sandblasted large grit, acid etched 표면처리에 따른 교정용 미니 임플랜트의 제거회전력에 관한 연구

오남희,김성훈,국윤아,이근혜,강윤구,모성서 대한치과교정학회 2006 대한치과교정학회지 Vol.36 No.5

Sandblasted large grit, acid etched(SLA) 표면처리 된 교정용 미니 임플랜트와 평활면을 가진 교정용 미니 임플랜트 사이에 제거회전력과 조직학적 소견을 통해 표면처리된 교정용 임플랜트의 임상적 가능성에 대하여 알아보고자 하였다. 실험재료로는 길이가 9.5 mm, 외경이 1.8 mm인 custom made, screw shaped, titanium implants가 사용되었다. 미니 임플랜트는 두개의 군으로 분류되었는데 SLA군은 20개의 SLA 표면처리된 미니 임플랜트이었고, 평활면군은 크기와 형태가 같지만 SLA처리공정이 생략되어 제작된 20개의 미니 임플랜트로 구성되었다. 이들은 10마리 가토의 경골에 식립되었다. 각각의 가토의 우측 경골에는 SLA군의 미니 임플랜트 2개가 식립되었고, 좌측 경골에는 평활면군의 미니 임플랜트 2개가 식립되었다. 각 군에는 식립 직후 Ni-Ti coil spring에 의해 약 150 g의 지속적인 견인력이 주어졌다. 식립 6주 후에 10마리의 가토를 희생하였고, 안정된 상태에서 Ni-Ti coil spring을 제거하였으며 digital torque gauge를 이용하여 제거 회전력을 측정하였다. 식립 6주 후에 SLA군의 경우 (8.29 Ncm) 평활면군 (3.34 Ncm)에 비해 더 높은 평균 제거회전력을 나타내었고 조직학적 소견에서도 screw 하방에서의 신생골 형성이 관찰되었다. SLA 표면처리된 미니 임플랜트는 평활면 미니 임플랜트에 비해 좀 더 강한 교정력에 저항할 수 있을 것으로 예상되었다. Objective: The purposes of this study were to evaluate the differences between sand blasted, large grit and acid-etched (SLA) treated mini-implants and smooth surface orthodontic mini-implants in relation to the removal torque as well as the histologic analysis. Methods: Custom-made, screw-shaped, titanium implants with a length of 9.5 mm and an outer diameter of 1.8 mm were divided into 2 groups; the SLA group (20 SLA treated orthodontic mini-implants) and the smooth surface group (20 smooth surface mini-implants), and placed in the tibia metaphysis of 10 rabbits. Each rabbit had 4 mini-implants placed, 2 in each tibia. The right tibia were implanted with the SLA group mini-implants and the left tibia had the smooth group mini-implants placed. Each mini-implant group were immediately applied with a continuous traction force of 150 g using a Ni-Ti coil spring. The rabbits were sacrificed 6 weeks post-surgically. Subsequently, the legs were stabilized, the Ni-Ti coil springs were removed and the mini-implants were removed under reverse torque rotation with a digital torque gauge. Results: 6 weeks after placement, the SLA group presented a higher mean removal torque value (8.29 Ncm) than the smooth group (3.34 Ncm) and histologic analysis revealed a higher new bone formation aspect along the screw in the SLA group. Conclusion: Results of this study indicates that SLA treated mini-implants may endure higher orthodontic forces without loosening.

정신과 환자에서 간이정신진단검사의 요인구조

오상우,김윤희,고효선,이상열,노승호 圓光大學校 醫科學硏究所 2008 圓光醫科學 Vol.23 No.2

배경: 본 연구는 SCL-90-R에서 9개 증상차원의 요인구조가 어떻게 나타나는지를 알아보는 데 목적이 있다. 방법: SAS 프로그램을 이용하여 정신과적 장애로 진단받은 환자 188명이 수행한 SCL-90-R 자료의 요인구조를 분석하였다. 결과: 요인분석 결과 SCL-90-R의 9개 증상차원은 단일요인으로 나타났다. 결론: SCL-90-R의 요인분석 결과 단일 요인 모형이 탐색되었다. 추후 연구에서는 SCL-90-R의 9개 척도에 대한 확인적 요인분석이 필요할 것으로 생각된다. Background: To find of this study was to find exploratory factor analysis of the nine scales of the Symptom Checklist-90-Revision(SCL-90-R). Methods: This study was investigated the factor structures of nine scales of the SCL-90-R in 188 patients with psychiatric disorders using SAS 8.02 software. Results: The factor structure showed that the factor structures of nine scales of the SCL-90-R had one factor. Conclusion: The factor structures showed that the factor structures of the SCL-90-R had one factor. Further research is nedeed about confirmatory factor analysis of the nine scales of the SCL-90-R.

지역 기술지원하부구조로서의 테크노파크 사업방향과 대학의 역할

吳德成,車相龍 충남대학교 지역개발연구소 1999 地域開發論叢 Vol.11 No.-