http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이남규(Namkyu Lee),한탁돈(Tackdon Han),김신덕(Shinduck Kim) 한국정보과학회 1995 한국정보과학회 학술발표논문집 Vol.22 No.1
가장 일반적으로 사용되는 데이터 저장 장치인 디스크는 기계적으로 동작되는 요소를 포함하고 있으므로 획기적인 성능 향상은 기대하기 어렵다. 본 논문에서는 디스크의 성능을 향상시키기 위하여 Y자 형으로 배치된 두개의 헤드를 가지는 디스크 구조를 제안하고 일반적인 디스크와 성능 평가를 한다. 제안한 디스크는 두개의 헤드가 데이터 저장 영역을 양분하여 처리하므로 데이터 찾기에 소요되는 시간을 줄여 준다. 성능 평가를 위하여 시뮬레이터를 개발하고 작업부하를 생성하여 시뮬레이션을 하였다. 시뮬레이션을 수행한 결과 제안한 디스크는 낮은 부하뿐만 아니라 비교적 높은 부하에서도 일반적인 디스크보다 좋은 성능을 보였다. 두개의 헤드를 가지는 디스크는 최대 찾기 거리를 절반으로 줄일 수 있으므로 디스크 접근에서 찾기 시간의 비율이 상대적으로 높은 응용 환경에 더 좋은 효과가 기대된다.
마하수에 따른 이차 분사시 초음속 유동장 및 표면 유동 수치 연구
이남규(Namkyu Lee),배지열(Ji-Yeul Bae),김태환(Taehwan Kim),강윤구(Yoon Goo Kang),조형희(Hyung Hee Cho) 한국추진공학회 2014 한국추진공학회 학술대회논문집 Vol.2014 No.12
본 연구는 마하수에 따라 이차 분사시 초음속 유동장에서 발생하는 유동 특성을 분석한 연구이다. 형상은 평판에서 진행되었고, 이차 분사 홀의 지름은 2.5 ㎜로 정하였다. 수치해석 프로그램은 Fluent v.14.5를 사용하였고, 난류 모델은 SST k-w를 적용하였다. 주 유동의 총 압은 6 기압, 총 온도는 290 K이고, 등엔트로피 방정식과 운동량비 정의를 통해 이차 분사 유동의 총 압을 설정하였다. 입구 마하수는 1.5, 3, 4.5, 운동량비는 0.5, 1.0, 1.5로 변화시키면서 해석을 진행하였다. 표면 압력장은 입구 마하수의 정 압 대비 표면 압력비로 나타내었다. 연구 결과 주 유동의 마하수 증가에 따라 압력비가 증가하는 것을 확인하였다. 또한, 박리 거리도 마하수 증가에 따라 증가하는 것을 확인할 수 있었다. This numerical study is focused on the analysis of flow characteristics in the supersonic flowfield with seconadry injection with respect to mach number. The geometry is flat plate and the diameter of secondary jet is 2.5 ㎜. Fluent v.14.5 is used for simulation. Turbulence model is SST k-w. The total pressure and temperature is 6 atm and 290 K. Secondary flow is considered by ise ntropic equation of main flow and definition of jet-to-momentum flux ratio(J). Mach number of main flow is 1.5, 3 and 4.5 and J is 0.5, 1.0 and 1.5. Surface pressure is represented by the ratio between static pressure of main flow and surface pressure. The results show that pressure ratio is increased by ascending of mach number. Also, separation length is further from the jet hole along with mach number of main flow.
운동량비와 냉각조건에 따른 이차분사 홀 주변의 열응력 해석
이남규(Namkyu Lee),송지운(Jiwoon Song),이종주(Jong Ju Lee),배지열(Ji-Yeol Bae),강윤구(Yoon Goo Kang),배주찬(Ju Chan Bae),조형희(Hyung Hee Cho) 한국추진공학회 2012 한국추진공학회 학술대회논문집 Vol.2012 No.11
본 연구는 평판의 이차 분사 체계에서 초음속 유동장의 상호 작용에 의해 발생하는 열응력을 수치적으로 연구했다. 해석은 상용코드인 ANSYS v.14를 이용하였다. 열경계조건으로는 선행 연구에서 운동량 비가 1.0, 1.5일 때 비정상 열유속 기법을 이용해 열전달 계수를 도출한 자료를 사용하였다. 평판의 재질은 초합금의 한 종류인 Inconel 718을 사용하였다. 실험 변수는 배면의 냉각조건으로써, 첫 번째는 냉매의 온도를 고정하고 열전달 계수를 200 ~ 500 W/m2·K 까지 변화시키고, 두 번째는 열전달 계수를 고정하고 냉매의 온도를 100 K~ 400 K 까지 변화시켰다. 결과는 열전달 계수가 300 W/m2·K 이상 증가하게 되면 평판의 상하면의 온도차이는 증가하지만 스트레스 변화의 폭이 줄어든다는 사실을 확인 할 수 있었다. This numerical study investigates thermal stress caused by supersonic flowfield interaction with secondary injection. The numerical investigation is conducted by ANSYS v.14. Heat transfer coefficient for this study uses past experimental data about momentum ratio 1.0 and 1.5. The flat plate is composed of Inconel 718 which is one of superalloy. Cooling condition is given by changing heat transfer coefficient or temperature of coolant.. Heat transfer coefficient is altered from 200 to 500W/m2·K in fixing condition of coolant, and temperature of coolant is varied from 100 to 400 K in fixing condition of heat transfer coefficient. The result is that thermal stress is steady above heat transfer coefficient around 300 W/m2 ·K though difference of temperature between upper and downward plate becomes larger.
헬륨 핵융합로 디버터의 노즐-충돌면간 거리에 따른 열적 특성 연구
이남규(Namkyu Lee),임준수(Joon-Soo Lim),최지홍(Geehong Choi),B.E. Ghidersa,조형희(Hyung Hee Cho) 대한기계학회 2017 대한기계학회 춘추학술대회 Vol.2017 No.11
The development of nuclear fusion reactor is essential for the usage of nuclear fusion energy, which is the advanced energy resources. For this reason, there are many efforts to develop the nuclear fusion reactor in many countries. Among the important parts, divertor is one of the obstacles to develop the nuclear fusion reactors because divertor has roles for maintaining the plasma shape and purity, and withstanding the high heat flux from thermal plasma. In Karlsruhe Institute of Technology (KIT), they have developed the multi-array impingement jet cooling for divertor using helium. In this study, we analyzed the thermal performance of helium-cooled divertor with the change of geometry which are the change of the nozzle-to-target distance. We conducted the numerical simulation using commercial code, Fluent v17.2. The parameters of the study are the cartridge diameter included in jet nozzle and cartridge position from tube center toward target surface. The results show that the increase of cartridge diameter decreases the thermal performance, and the increase of cartridge position from tube center increases the thermal performance in the helium-cooled divertor.
지연 최소화를 위한 디스크 - 메모리 혼용 디스크 구조
이남규(Namkyu Lee),한탁돈(Tackdon Han) 한국정보과학회 1999 한국정보과학회 학술발표논문집 Vol.26 No.2Ⅲ
이 논문에서는 폭넓게 사용되지만 컴퓨터의 메모리 계층 구조상에서 병목지점으로 알려진 하드디스크의 획기적인 성능향상을 위해서 메모리 시스템이 내장된 새로운 형태의 디스크 구조를 제안한다. 제안하는 디스크 구조에서는 디스크에 메모리를 혼용하여 사용함으로써 디스크 응답 시간을 크게 줄이고, 입출력을 빠르게 처리할 수 있다. 64MB까지의 디스크 메모리를 탑재한 경우 두 가지 실제 트레이스에 의한 시뮬레이션 결과 20여명이 사용하는 공유 시스템의 작업부하에서는 최대 80% 정도의 히트율을 통하여 최대 1/2, 그리고 개인용 시스템의 경우 최대 85% 가량의 히트율을 통해 1/5 수준으로 응답시간을 단축할 수 있었다. 앞으로 디스크에 단순히 메모리를 추가하는데 그치지 않고 데이터 블록의 배치 방법, 데이터 분산 배분 방법, 보관정책, 선인출 방법 등을 이용하면 추가된 디스크 메모리의 효용을 극대할 수 있다.
초음속 유동장 내 이차분사시 평판과 환형 노즐간의 유사성에 대한 수치해석적 연구
이남규(Namkyu Lee),배지열(Ji-Yeul Bae),송지운(Jiwoon Song),김태환(Taehwan Kim),강윤구(Yoon Goo Kang),조형희(Hyung Hee Cho) 한국추진공학회 2013 한국추진공학회 학술대회논문집 Vol.2013 No.5
본 연구는 초음속 유동장 내 이차분사시 평판과 환형 노즐간의 유사성에 대해 고찰하였다. 해석은 상용코드인 Fluent v.14를 이용하였다. 초음속 유동장이 흐르는 형상을 평판, 확장 평판, 노즐 세 가지로 변화시켜 해석하였고, 분사 홀을 기준으로 운동량비와 마하 수, 총압, 총온도는 고정하였다. 해석에 사용된 격자는 Gruber 실험 케이스를 통해 검증하였으며 관심영역에서는 유사한 결과를 얻을 수 있었다. 평판과 확장 평판의 경우에는 박리 거리는 유사하지만, 박리 구간의 길이와 압력의 크기가 다른 것을 확인할 수 있었다. 또한, 평판, 확장 평판 그리고 환형 노즐을 비교했을 경우 평판과 환형 노즐간의 결과가 평판과 확장 평판 간 해석 결과에 비해 유사성이 떨어지는 것을 확인하였다. 추가적으로 진행한 평판과 Gruber Case를 비교한 결과에서는 박리 거리가 운동량비에 지배적인 영향을 받는 것을 알 수 있었다. This numerical simulation investigated analogy between flat plate and circular nozzle with secondary injection. Fluent v.14 was used to calculate this numerical study. The variables were three geometries of supersonic flow field such as flat plate, expanded plate and conical nozzle. Momentum ratio, Mach number, total pressure and temperature at the injection hole was constant. Mesh was validated by Gruber and it was similar results with experimental data in the scope of this paper. In case of flat and expanded plate, separation length is alike but region of separation and peak of normalized pressure are different. Also, in comparison of all cases, flat plate and circular nozzle are less analogous than flat and expanded plate. Additionally, comparing Gruber and flat plate in this study, separation length is alike. It means momentum ratio is dominant about the separation length.