http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
그룹 이동성 모델에서 전방향 벡터를 이용한 정확한 파티션 시간 예측
하남구(Namkoo Ha),이병직(Byeongjik Lee),황성호(Sungho Hwang),한기준(Kijun Han) 한국정보과학회 2004 한국정보과학회 학술발표논문집 Vol.31 No.1A
애드혹 네트워크에서 그룹 이동성을 고려할 경우, 주요한 이슈 중 하나가 그룹의 파티션 문제이다. 파티션 시간의 예측을 위해서, 기존의 모델들은 파티션이 발생하는 두 그룹의 대칭적 이동을 가정한다. 그러나, 실제 상황에서 파티션은 다양한 방향으로 일어나므로 대칭적 방향만을 고려한다면, 정확한 파티션 시간을 예측할 수 없다. 본 논문은 대칭적 이동뿐만 아니라, 모든 방향을 고려한 네트워크 파티션 분석 모델을 제시하고 수학적인 분석을 통해 이를 증명한다. 따라서, 정확한 파티션 시간의 예측이 가능하다.
임의의 직교 블록 변환 영역에서의 영상 크기 변환 방법
이남구(Namkoo Lee),오형석(Hyungsuk Oh),김원하(Wonha Kim) 대한전자공학회 2009 電子工學會論文誌-SP (Signal processing) Vol.46 No.1
본 논문에서는 임의의 직교 블록 변환 영역에서 직접 영상 크기를 변경하는 기법을 개발한다. 이를 위해, 임의 직교 변환영역에서 영상 크기 변환을 수행하는 모든 과정을 행렬 곱으로 표현하여, 해상도 변환을 수행하는 행렬을 유도한다. 해상도 변환 행렬은 영상 특성에 따라 직교 블록 변환에 알맞은 일반식으로 설계한다. 개발된 기법은 기존의 실수 DCT 영역 뿐만 아니라 H.264/AVC에 적용 가능한 4×4 Modified DCT 및 Hadamard 변환과 같은 다양한 직교 변환 영역에 적용할 수 있고, 동영상 부호화시 사용되는 대표적인 시퀀스 영상들의 해상도 변환에 적용 가능함을 실험을 통하여 검증하였다. This paper develops a methodology for resizing the resolution of an image in an arbitrary block transform domain. To accomplish this, we represent the procedures resizing images in an orthogonal transform domain in the form of matrix multiplications from which the matrix scaling the image resolutions is produce. The experiments showed that the proposed method produces the reliable performances without increasing the computational complexity, compared to conventional methods when applied to various transforms.
HFC152a, HFC134a, 프로판을 포함한 자동차용 대체/보충 냉매의 성능 평가
강남구(Namkoo Kang),배근환(Guenhwan Bae),박기정(Ki-Jung Park),정동수(Dongsoo Jung) 대한설비공학회 2010 설비공학 논문집 Vol.22 No.6
In this study, HFC152a, HFC134a/HFC152a and HC290/HFC134a/HFC152a mixtures are studied for the supplementary and alternative refrigerants for HFC134a used in automobile air-conditioners. Due to the high global warming potential of HFC134a, it has to be phased out in the long run. Thermodynamic performance of these refrigerants are measured in a bench tester of 3.5 kW capacity with an open type compressor under both summer and winter conditions. Test results show that the coefficient of performance (COP) and capacity of pure HFC152a and HFC134a/HFC152a mixture are 9.1~12% and 7% higher than those of HFC134a. As for the HC290/HFC134a/HFC152a, the COP is up to 9.5% higher than that of HFC134a with 1~2% of HC290 while that is up to 6.1% lower than that of HFC134a with 5% HC290. The capacity of the ternary mixture, however, is 8.6% higher than that of HFC134a at all compositions tested. The compressor discharge temperatures of all refrigerants tested are 6~10℃ higher than that of HFC134a. For all refrigerants, the amount of charge is reduced up to 32% due to the decrease in liquid density. Overall, these refrigerants provide good performance with reasonable energy savings with less environmental problem and thus can be used as long term alternatives for automobile air-conditioners.
R22 대체 R170/R1270 혼합냉매 적용 히트펌프 성능 평가
강남구(Namkoo Kang),박기정(Ki-Jung Park),정동수(Dongsoo Jung) 대한설비공학회 2009 대한설비공학회 학술발표대회논문집 Vol.2009 No.-
In this study, performance of R170/R1270 mixture is measured on a heat pump bench tester in an attempt to substitute R22. All tests are conducted under the summer cooling and winter heating conditions of 7/45℃ and -7/41℃ in the evaporator and condenser respectively. During the tests, the composition of R170 is varied from 0 to 10% with an interval of 2%. Test results show that capacities of R1270 and R170/R1270 mixture are 3.2-10.0% and 4.2-20.4% higher than those of R22, respectively. The coefficient of performance (COP) of R1270 is 2.7-3.6% higher than that of R22. On the other hand, the COP of R170/R1270 mixture decreases at a constant rate as R170 is added to R1270. The COP of R170/R1270 mixture is similar to that of R22 at 2% R170 and then becomes lower than those of R22 as R170 is increased. For the mixture, the compressor discharge temperature is 8-20℃ lower than that of R22. The amount of charge is reduced up to 55% as compared to R22. Overall, pure propylene and R170/R1270 mixture are good long term candidates from the view point of energy efficiency and greenhouse warming to replace R22 in residential air-conditioners and heat pumps.
천민수(Minsu John),이남구(Namkoo Lee),김원하(Wonha Kim),김성민(Sungmin Kim) 대한전자공학회 2008 電子工學會論文誌-SC (System and control) Vol.45 No.4
본 논문에서는 L1-norm 기반 이산 극좌표에서의 방사형 영상처리 기법을 제안하고자 한다. 위를 위하여, 먼저 L2-norm기반 극좌표는 이산 시스템에서 존재할 수 없음을 확인하였고, Cartesian 좌표를 이산 극좌표로 변환하는 기법을 개발하였다. 제안된 방법을 유방암 영상의 안정화와 극도의 무정형 물체 경계 탐지에 적용한다. Cartesian 좌표계에서 수행된 Gaussian 필터링 방법과 비교하여, 제안된 방법은 전반적인 방사형 mass 영상을 유지하는 동안 영상 신호를 안정화했다. 기존의 경계 탐지기가 무정형 물체의 모양을 정확하게 찾을 수 없는 반면, 제안된 경계 탐지 기법은 높은 정밀도로 탐지해낸다. 본 논문은 또한, 홍채 영상 분리 기법에의 응용과 좋은 검증 결과를 갖게 되었다. We propose a radial image processing method in a discrete polar coordinate system based on L1-norm. For this purpose, we first verified that the polar coordinate based on L2-norm can not exist in discrete system and then develop a method converting the Cartesian coordinate to the discrete polar coordinate. We apply the proposed method to smooth mass images of breast tissue and to detect the boundaries of extremely deformable objects. Compared to the Gaussian smoothing method performed in the Cartesian coordinate system, the proposed method stabilized the image signal while maintaining the overall radial shape of mass images. The proposed boundary detection method can detect shapes with high precision while conventional edge detectors can not accurately detect the shape of deformable objects. We also exploit the method to perform pupil detection and have had good experimental results.
이호승(Hoseung Lee),하남구(Namkoo Ha),한기준(Kijun Han) 한국정보과학회 2004 한국정보과학회 학술발표논문집 Vol.31 No.2Ⅲ
센서 네트워크의 응용 분야 중에서 센서가 밀집되게 분포 되어야 하는 경우 적절한 개수의 노드만 활성화시켜 이 노드들 만으로 전송 경로를 구성하여 센서가 수집한 데이터를 데이터 수집 노드에 전달되도록 한다. 휴지 상태에 있는 노드를 활성화하는 기존의 모델들은 활성 노드의 개수와 전송 손실률을 이용하거나 지리 정보를 이용하여 센서 네트워크 토폴로지를 구성하였다. 이 논문에서는 활성 노드 간의 거리 정보를 이용하여 센서 네트워크 토폴로지를 구성하는 방법을 제안한다. 이 방법을 사용한 결과 지역적으로 활성 노드가 균일하게 분포되었으며 센서 밀집도가 높을수록 더 좋은 에너지 효율을 얻을 수 있었다.
적외선 표적 모델링을 위한 3차원 복합 열해석 기법 연구
장현성(Hyunsung Jang),하남구(Namkoo Ha),이승하(Seungha Lee),최태규(Taekyu Choi),김민아(Minah Kim) 한국정보과학회 2017 정보과학회논문지 Vol.44 No.4
적외선 표적의 정밀한 모델링을 위해서는 정확한 표면온도 계산이 필요하다. 본 논문에서는 전도, 대류, 복사를 고려한 복합 열해석 모듈을 소프트웨어로 구현하고, 이를 통하여 표적 재질 및 자세, 환경 요건에 따른 표적의 표면온도 해석을 수행 하였다. 구현된 결과는 상용 소프트웨어인 OKTAL-SE 와의 비교를 통하여 결과의 신뢰성을 검증하였다. 그 결과 자체 검증이 완료된 상용 소프트웨어인 OKTAL-SE 와 약 1% 이내의 오차를 보였다. 계산된 온도 결과를 바탕으로 적외선 표적 모델링을 수행하였으며 OKTAL-SE와의 연동을 통해 적외선 신호 해석을 수행하였다. The spectral radiance received by an infrared (IR) sensor is mainly influenced by the surface temperature of the target itself. Therefore, the precise temperature prediction is important for generating an IR target image. In this paper, we implement the combined three-dimensional surface temperature prediction module against target attitudes, environments and properties of a material for generating a realistic IR signal. In order to verify the calculated surface temperature, we are using the well-known IR signature analysis software, OKTAL-SE and compare the result with that. In addition, IR signal modeling is performed using the result of the surface temperature through coupling with OKTAL-SE.