통행전 여행시간정보에 대한 기초적연구

남궁문,성수련,이병주,김경태 圓光大學校 1996 論文集 Vol.32 No.2

본 논문은 통행전 정보가 운전자의 경로선택에 미치는 영향을 연구하는데 있으며 통행전정보 제공에 대한 운전자의 경로선택을 분석하기 위하여 선호의식조사를 실시하였다. 통행전 정보로 대체경로에 대한 통행시간 정보를 사용하였으며 운전자의 경로선택행동을 분석하기 위하여 비집계분석모델을 이용하였다. 결과, 운전자의 사회ㆍ경제적 속성과 통행전정보가 운전자의 경로선택에 영향을 미침을 알 수 있다. The main purpose of this paper is to investigate the effects of pre-trip information for drivers' route choice. Stated preference survey is performed to analyze the drivers' route choice for pre-trip information. In this paper, the consuming time for alternative pass is considered as the pre-trip information. Descrete choice analysis is used to model the drivers' route choice behavior. As a result, it shows that social income attribute of the driver and the travel time with pre-trip information affect the drivers' route choice behavior.

Random Exciting에 依한 드릴링머시인의 動的性能試驗에 關한 硏究

남궁척 충남대학교 공업교육연구소 1983 論文集 Vol.6 No.2(B)

In this study, both cutting tests and exciting tests were conducted to establish the basis for dynamic performance tests of drilling machines. For the cutting test, the behavior of the static and dynamic components of cutting resistance in drilling were measured with a dynamometer of the piezoelectric transducer type. For the exciting test, the machine tool was excited through an excitor and the displacement caused by the exciting force was measured, The exciting signals used in the exciters were analogous signal and cutting resistance signal. The testpieces used in the experiments were carbon steel, brass and aluminium alloy. On the basis of the results of the experiments, the following conclusions are drawn; 1. Static and dynamic components in drilling. 1) Dynamic components of cutting resistance were not related to the depth of drilled hole. 2) As feed and drill diameter increased, static and dynamic components of cutting resistance were increased. 3) Dynamic components of cutting thrust were increased by increasing spindle speed. 4) The ratio of the dynamic component to the static component was 0.3-0.5 in torque and 0.1-0.2 in thrust. 5) The behavior of the static and dynamic components in the process of drilling through was the same as that of a blind hole. 6) The characteristics of the tool system affected the dynamic component of cutting resistance greatly, though this effect depended considerably on the work materials. 7) The maximum amplitude of the dynamic componet was increased in proportion to the feed rate and the spindle speed. 2. Exciting test of drilling machines. I) The frequency respone of Inertance of a drilling machine, measured by using analogous random signal as an exciting source, was different from that of the signal of cutting resistance. 2) Even though actual drilling conditions were used for the exciting signal, the measured results were different, depending on the drilling conditions and work materials. In the case of the exciting test, better results could be obtained when a cutting resistance signal was used as an input for the exciting signal and the peformance of the drilling machine could be tested under practical drilling conditions.

Etude sur la Structure de "L'Annonce faite a Marie"의 構圖

南宮燃 聖心女子大學校 1983 論文集 Vol.15 No.-

En nous referant a situation-type "la face a face separateur" du theatre claudelien, etabli par Jean Rousset daus son livre "Forme et signification", nous avons essaye de degager l'architecture de "L'Annonce faite a Marie" pour voir dans quelle mesure la theorie de Rousset est valable a appliquer aux oeuvres de Claudel. Le scheme degage par Rousset est la confrontation=la separation/la reconciliation. Une etude approfondie nous revele la symetrie des quatre actes sur le theme de separation/reconciliation. Le prologue et l'acte Ⅰ et Ⅱ s'achevent sur une scene d'adieux et sur un depart entre Pierre er Violaine, Anne Vercors et sa famille, Violaine et Jacques Hury. Dans ces scenes de separation, deux etres qui s'aiment acceptent de renoncer l'un a l'autre. Apres7ans de l'hiatus, l'acte Ⅲ et Ⅳ souvrent sur le theme de rencontre et de reconciliation. Mara retrouve Violaine, et Anne rentre a la maisonramenant Violaine. Surtout dans l'acte Ⅲ, la reconciliation de Mara avec Violaine fait naitre le miracle de resurrection de l'enfant mort de Mara. Dans l'acte Ⅳ, tout le monde se reconcilie : Violaine avec Jacques, Jacques avec Mara. Ainsi nous pouvons dire sans trop de difficulte que le scheme de Rousset est valable pour la structure fondamentale de "l'Annonce faite a Marie". Mais Rousset na pas indique le mouvement menant la separation vers la reconciliation. En etudiant la progressian du drame, nous avons constate le mouvement ascendant dans lespace. En premier lieu, se revelent nombreux elements qui signifient la hauteur : les clochers, les fleches des Eglises, l'alouette. Les personnages aussi montrent le meme mouvement ascendent dans leur vie spirituelle. Surtout Violaine achemine vers la saintete a travers la souffrance acceptee. Le choix des heures et des saisons contribue egalement a structurer la piece. Midi et Minuit, solstices de juin et de decembre signifient des lignes de partage imaginaires. Chaque fin est en meme temps origine. Ainsi chaque tournant du destin d'un personnage s'accorde a cette heure de partage. Les elements musicaux et les sons de cloche jouent aussi un role important. Les chants liturgiques, les chants populaires, les cloches, surtout Angelus, les trompettes, tous ces elements contribuent a renforcer la signification spirituelle de la piece. Enfin pour completer la camprehension profonde de la piece, nous avons releve quelques significations symbolipnes ainsi que le symbole de "la porte", "la lepre" etc…. En conclusion, nous avons decouvert dans cette piece une architecture assez complexe, mais d'une etonnante unite interne.

運轉者의 車間距離 認知特性分析

남궁문 圓光大學校 附設 都市地域開發硏究所 1994 都市計劃論文集 Vol.1 No.-

A driving way is closely and directly related to the three main factors, which are enviornmental features of roads, driver's experience and knowledge and characteristics of acceleration and deceleration of moter vehicle. An attempt is carried out to express the cognition scale of spacing between vehicles through driver's language experimental for spacing hedway on aterial road. And then, T-test treals to check the testee's characteristics for the cognition level of spacing between vehicles.

旋削工程에서 排出狀態의 인프세스 認識에 관한 硏究

강도경,남궁석 忠南大學校 産業技術硏究所 1990 산업기술연구논문집 Vol.5 No.1

This paper deals with in-process recognition of chip formation in trurning. According to the demand of high-efficiency in cutting process, the importance of chip problem has been raised, and so it is important of cutting force, and the in-process detection of the chip formation is one of the most important technologies in completely automatic operation of cutting process. As a result, the following conclusion can be drown. 1. In turning, the dynamic component of cutting force through the band pass filter(80-500HZ) reflects the broken condition of chip accurately, and its wavy pattern has periodicity. 2. The dynamic component of cutting force in broken type is bigger than that of continuous type. 3. After judging from whether the chip in real on-line condition had been broken or not, with the threshold obtained from the experiment. The on-line system was well recognizing the continuous type and broken type.

切削抵抗의 動的成分에 미치는 切削條件의 影響에 關한 硏究(Ⅱ)

全彦燦,남궁척 충남대학교 공업교육연구소 1986 論文集 Vol.8 No.3

In this study, the static and dynamic commponents of cutting resistance were measured with tool dynamometer (Swiss, piezo-electric type) when S 45 C, Al-alloy and brass were drilled under the some variable conditions. 1) The dynamic components of these cutting resistance are not related to the depth of drilled hole. 2) The static and dynamic components of cutting resistance are increased in accordance with the increase of feed and drill diameter. 3) The dynamic components of thrust force are increased in accordance with the increase of spindle speed. 4) The rate of the dynamic component to the static component is 0.3∼0.5 in torque, 0.1∼0.2 in thrust force. 5) The characteristic of the tool system is affected in dynamic component of cutting resistance, and the created frequency and amplitude of the chip are determined by the drilled materials. 6) The maximum amplitude of the dynamic component is increased proportionally in accordance with the feed rate and the spindle speed.

팽창재를 혼입한 숏크리트의 초기수축 및 내구성 평가

남궁경(Nam Gung, Kyeong),박정욱(Park, Jeong Uk),이겨레(Lee, Kyeo Re),윤경구(Yun, Kyong Ku) 한국콘크리트학회 2012 한국콘크리트학회 학술대회 논문집 Vol.2012 No.5

「사회변동과 유사법조직능의 문제점」 제2회의 발표 논문 공인회계사제도의 현황과 문제점

남궁호경 ( Nam Gung Ho Gyeong ) 서울대학교 법학연구소 1987 서울대학교 法學 Vol.28 No.3

급결제의 종류 및 혼입량에 따른 현장 적용 습식 숏크리트의 성능 평가

남궁경(Nam Gung, Kyeong),박정욱(Park, Jeong Uk),이겨레(Lee, Kyeo Re),김성권(Kim, Seong Kwon),윤경구(Yun, Kyong Ku) 한국콘크리트학회 2011 한국콘크리트학회 학술대회 논문집 Vol.2011 No.11

고등학교 한문과 읽기 교육의 문제

남궁원 ( Gung Won Nam ) 한국한자한문교육학회 2008 漢字 漢文敎育 Vol.21 No.-

In this article, `Reading` means that it defines at the revised Chinese writing curriculum. That is, Reading is limited, not general. I analyze the contents of manual which present lately in Middle school Chinese writing curriculum. It is good for essential elements to learning, as `Reading aloud`. In learning Chinese writing, Reading aloud is good and useful for learners. Also, it needs a variety of methods and evaluation bases. Moreover, it is urgently needed presentations of reading method and reading attitudes. This article refer to the chunking, too. First, I don`t agree Hyeonttomun (descriptive style: put the Korean between Chinese characters) get into the Chinese writing textbook. I wash my hands of `Translation rightly` section. I predicted jumped on the Grammar-translation method bandwagon. Thanks to revised Chinese writing Curriculum, new textbooks will publish. Reading is in a class of its own. `Reading` precede `Comprehension`. To achieve successful reading educations, the thing is that I still have a great deal of work to do. That is, details of curriculum, display and choice of reading materials, elements of reading evaluation, evaluation style, and process and so on.