우리나라 著作權法上 著作人格權의 保護

高明植 국제지역학회 1998 국제지역연구 Vol.2 No.1

Everyone creats, owns or transacts the creative works. Copyright law deals with these creative works in the field of literature, music, drama, art, building, photograph, film, figure and computer program. It was conceived in order to encourage the creation, development and distribution of these works of authorship. It accomplishes this by giving authors the economic right and the moral right to their works. If such protection were absent, unauthorized reprodution and distribution would be so easily accomplished that the quantity and diversity of creative activity would be inhibited. The moral right is to protect the author with respect to his intellectual and personal relation to the work. It is not subject to transfer or assignment. It consists of the right of dissemination, the right of paternity and the right of integrity. The right of dissemination is the right to determine whether and how the work is to be disseminated. The right of paternity is the right to determine whether the work is to bear an author's designation and what designation is to be used. The right of integrity is the right to prohibit any distortion or any other mutilation of the work. The purpose of this article is to analyze the rights which the moral right consists of. Examining the infringment on the moral right is another purpose of this article. By describing these rights and how they are protected, it is hoped that the problems surrounding them can be finally understood. After the introductory chapter, chapter 2 deals with the primary principles on the moral right. It examines the nature of the moral right, the work and the author of the work. Furthermore, there are three chapters looking at specific types of rights which belong to the moral right. Chapter 3 deals with the right of dissemination, chapter 4 with the right of paternity and chapter 5 with the right of intergrity. Each chapter examines the general idea and the protection scope of each right. And chapter 6 looks at the infringment on the moral right. This chapter examines the measure of remedy for the infringment, the infringer and the infinger's negligence. Finally, chapter 7 is the conclusion. My goal in writing this article is to provide a useful tool for everyone involved in infringment on the moral right. I hope that the readers will obtain some practical benefit from it.

Resin Casting Mold Process를 이용한 복합재료 펌프 제작에 관한 연구

김명식,최원종 한국 항공대학교 항공산업기술연구소 1999 航空宇宙産業技術硏究所 硏究誌 Vol.9 No.-

본 연구에서는 vinyl ester를 복합재료의 기지로, milled fiber와 mineral filler를 강화재료로 사용하여, resin casting mold process 성형제조 방법으로 펌프 부품들을 제조하였다. 본 연구에서는 제시된 제작 방법을 이용하여 부품을 제작할 경우 기존의 방법에 비해 균일한 품질보장과 함께 생산단가를 절감시킬 수 있으며 복잡한 형상제작이 가능하다. DSC 열분석과 경도시험을 수행하여 수지, 경화제, 촉진제의 비율을 결정하였고, 내식성 실험을 통해 vinyl ester의 각종 화학약품에 대한 내식 특성을 평가한 결과 다른 수지에 비해 내식성이 우수함을 알 수 있었다. 또한, 경도시험 data와 제조된 시편의 단면을 SEM으로 관찰한 결과, 수지 : milled fiber : mineral filler의 최적혼합비를 100 : 30 : 10 으로 결정할 수 있었다. 이와 같은 실험결과들을 이용하여 mold를 제작한 후 vacuum 상태에서 경화시킴으로써, 우수한 물성을 갖는 균질한 펌프 시제품 part들을 제작할 수 있었다. In this study, composite pump parts were manufactured by resin casting mold process using vinyl ester matrix, reinforcements of milled fiber and mineral filler. Comparing the fabrication method adopted in this study with other process, it is shown that composite parts manufactured by present method have higher quality, lower cost than those manufactured by conventional hand lay up process. To determine the optimum ratio of resin, hardness test and corrosion test. The optimum mixing ratio of resin, milled fiber, and mineral filler has been determined as 100 : 30 : 10 by means of hardness test data and SEM observation.

Pool 화재에서의 표면 냉각에 의한 소화

한용식,김명배,신현동 (社團法人) 韓國火災 ·消防學會 1997 한국화재소방학회논문지 Vol.11 No.4

건물의 가압방연시스템 설계를 위한 유동해석에 관한 연구

김명배,한용식 社團法人 韓國火災 ·消防學會 2000 한국화재소방학회논문지 Vol.14 No.2

逸失利益算定의 諸問題 : 自動車事故를 中心으로 In the Compensation for the Automobile Accident Damages

高明植 釜山工業大學校 1993 論文集 Vol.35 No.-

It is the most controversial head of the pecuniary damages compensation for the personal injury in the tort law to assess the loss of earnings. Ordinarily it makes a great difference whether the pecuniary damages in the future are expressed as the compensation for the loss of earnings or ear-ning capacity. Therefore it is the aspect calling for the most examination whether we grasp the meaning of the pecuniary damages in the future as the loss of earnings or as the loss of earning capacity. For example, the distinction between the loss of earnings and the loss of earning capacity attains the practical significance in connection with claims by the persons who at the time of the accident were not gainfully employed. Another difficult question arises in the case of when the victim has been died at the accident. In that case, it becomes doubtful whether the victim's dependents inherit the victim's right to sue or not. If the victim's dependents do not inherit the victim's right to sue, it is also a question whether the victim's dependents have the right to sue for the compensation of his own benefits lost by victim's death or not. This study deals with mainly the problems as we have seen above. And it also deals with the problems about the concrete criterions for the assessment of loss of earnings and the deduction of interests in determining the victim's income.

무산소-RBC 공정을 이용한 질소제거 특성 및 동력학적 인자 도출

최명섭,손인식 한국환경과학회 2003 한국환경과학회지 Vol.12 No.10

This study was conducted to investigate anoxic-RBC (rotating biological contactor) and its application in advanced municipal wastewater treatment process to remove biologically organics and a㎜onia nitrogen. Effluent COD and nitrogen concentration increased as the increase of volumetric loading rate. But, the concentration changes of NO₂-N and NO₃-N were little, as compared to COD and NH₄^(+)-N. When the volumetric loading rate increased. COD removal efficiency and nitrification appeared very high as 96.7~98.8% and 92.5~98.8%, respectively. However, denitrification rate decreased to 76.2~88.0%. These results showed that the change of volumetric loading rate affected to the denitrification rate more than COD removal efficiency or nitrification rate. The surface loading rates applied to RBC were 0.13~6.01g COD/m² -day and 0.312~1.677g NH₄^(+)-N/m²-day and they were increased as the increase of volumetric loading rate. However, the nitrification rate showed higher than 90%. The thickness of the biofilm in RBC was 0.130~0.141㎜ and the density of biofilm was 79.62~83.78㎎/cn. They were increased as surface loading rate increased. From batch kinetic tests, the k_(maH) and k_(maxN) were obtained as 1.586 g C/g VSS-day. and 0.276 g N/g VSS-day, respectively. Kinetic constants of denitrifer in anoxic reactor, Y, K-(e), K_(s) and k were 0.678 ㎎ VSS/㎎ N. 0.0032 day^(-1). 29.0 ㎎ Nℓ and 0.108 day^(-1). respectively. P and K values of nitrification and organics removal in RBC were 0.556 g N/m² -day and 18.71 g COD/m²-day, respectively.

평판하 연기선단의 가시화

한용식,김명배,오광철,유상필 한국화재소방학회 2001 한국화재소방학회논문지 Vol.15 No.1

수평 평판과 충돌하는 제트에 의해 생성되는 연기유동을 관찰하기 위해 질소가스에 kerosene연기입자를 뛰워 유동장을 가시화하였다. 광원으로는 아르곤-이온 레이져 평면광이 사용되었다. Kerosene smoke의 산란 광에 의한 수직평면 상(image)과 수평평면 상을 고속 CCD 카메라와 비디오 카메라로 녹화하였으며, 얻어진 영상으로부터 연기 선단의 순간속도 및 평균속도를 측정하였다. The flow induced by a vertically impinging circular jet under a horizontal plate is investigated by visualization technique, using kerosene smoke in nitrogen gas to visualize the vortex flow and impinging flow. The light source was the sheet beam of Ar-Ion laser. The vertical and horizontal images scattering of kerosene smoke were recorded by the high speed CCD camera and the video camera. The instantaneous velocity of the smoke front were measured from the acquisited images.

북한의 산업실상과 남북경협 전망

김명식 中央大學校 民族發展硏究院 2002 民族發展硏究 Vol.- No.6

일반미 산지유통 문제점 및 개선방향

유남식,김명환 中央大學校 食糧資源硏究所 1994 食糧資源硏究所 論文集 Vol.6 No.1

The major objectives of this thesis are to make analysis on the economic feasibility of rice processing complex(RPC) which has been introduced since 1991 by the Korean government and, its location, the selection criteria of RPC operational subject, government supporting measures and the linkages of forward and backward of RPC. It is an incrasing tendency in Korea that the quality of rice is more important criterion than the price of it to rice consumers. Therefore, RPC, a new rice processing system, which improves the quality of rice after harvest and delivers the product to the comsumer directly, is necessary to meet the consumers' need. Wet rice is collected from farmers directly after harvest into a RPC, and the rice is dried, stored, milled in the RPC and sold to the consumer directly . The RPC program is expected to increase the quality of rice as well as to prevent the loss of it after harvest and to solve the labor shortage problem of farm households. This thesis consists of four major parts : problem identification of rice marketing and post harvest prodecure in rice production, economic feasibility of RPC, location analysis of RPC, and RPC operational and government supporting measures. The comparative cost analysis between conventional method and RPC were measured by using current government grain operation cost and field survey data on RPC. The economic return rate(ERR) was measured by using hypothesized RPC balance sheet under the assumption that all the rice produced in Korea is processed at RPC by the year 2022. The location analysis was made by using the long tern trend of rice consumption and rice production by region. Major findings are as follow: 1. The economic benefits of RPC operation are classified as the cost saving in the post harvest processing procedure, the prevention of rice lose, and the price increase by producing high quality of cleaned rice. The total benefits of the RPC operation was estimated at 144,616 won per ton which is equivalent to 11,569 won per bag of 80㎏. The economic return rate of RPC by scale was measured a 47.4% for the RPC handling 7,500 ton of wet rice, 55.2% for the RPC handling 10,000 ton of wet rice respectively. 2. This thesis hypothesizes that most of the post harvest procedure in rice production will be made by RPC by the year 2020. Under this assumption, about 500-650 RPC(10,000-7,500ton scale by wet rice storage capacity) is necessary through out the nation to meet the need. 3. Rice must be dried at once in an adequte time. Therefore, a large qualtity of wet rice can not be dried at one RPC. It is desirable to construct a RPC system separating its function into two; a central RPC and subordinating drying and storage facilities. In this case, the central RPC functions to dry, store, mill, and to pack rice for marketing. 4. To improve the operation capacity of RPC and to reduce the pressure of rice purchasing capital. RPC may deal with bath of government purchased rice produced by farmers. The rapid increase of RPC facilities may result in over competitiveness and over investment. Present government plan constructing 300 RPC by 1997 may be over enthusiastic. Therefore, there is a need readjustment of the plan. At the same time, the drying and storage facilities must be scattered in a proper distance for the convenience rice transportation. 5. To improve the efficiency of RPC, the wet rice collection channel, ensuring the enough quantity of rice for processing, packing the final product, and marketing channel must be linked to RPC operation.

연기선단의 전파속도 모델에 관한 연구

김명배,한용식 한국화재소방학회 2001 한국화재소방학회논문지 Vol.15 No.2

복노나 터널과 같이 특정한 방향성을 가지는 공간에서는 천장아래에 형성되는 연기선단의 성상해석이 학술적인 면에서나 실용전인 면에서도 매우 중요하다본 연구는 2차원 축대칭 천장제트 선단의 전파속도를 모델화하기 위하여 상사해석 및 차인해석윽 수행하였다그 결과 전파속노가 거리에 반비례하는 모델을 제안하였으며, 실험을 통하여 그 타당성을 입증하였다실험에서는 질소와 헬륨의 혼합가스를 원형 천장에 노즐로 분출시켜 화재로 인한 연기를 구현하였으며 속도측정을 위하여 레이저와 고속카메라를 이용한 가시화 기법이 사용되었다. Decays of the ceiling jet front velocity under a circular ceiling are investigatedTo simulate the ceiling jet in fires He and N2 gas were injected from a nozzle to the center of the ceilingThe jet fronts in the form of turbulent eddies were traced by a high-speed camera systemThe instanta-neous locations of the front were obtained from visual redings of visualized front, and the radial velocity was calculated from the information of the time and the location with respect to the frontThe similarity and dimensional analysis were also carried out to reveal the relationship between the velocity decay and the radial distanceIt was shown that the radial velocity of the front was inversely proportional to the radial distance in the fully developed region from the experimental results and the theoretical analysis.