http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
A General Template to Configure Multi-Criteria Problems in Ubiquitous GDSS
João Carneiro,Diogo Martinho,Goreti Marreiros,Paulo Novais 보안공학연구지원센터 2015 International Journal of Software Engineering and Vol.9 No.11
The study of multi-criteria problems adapted to the context of Ubiquitous Group Deci-sion Support Systems (UbiGDSS) is covered in the literature through very different per-spectives and interests. There are scientific studies related to the multi-criteria problems that lie across argumentation-based negotiation, multi-agent systems, dialogues, etc. However, to perform most of these studies, a high amount of information is required. The usage of so much data or information that is difficult to collect or configure can bring good results in theoretical scenarios but can be impossible to use in the real world. In order to overcome these issues, we present in this paper a general template to configure multi-criteria problems adapted for the contexts of UbiGDSS that intends to be easy and fast to configure, appellative, intuitive, permits to collect a lot of data and helps the deci-sion-maker transmitting his beliefs and opinions to the system. Our proposal includes three sections: Problem Data, Personal Configuration and Problem Configuration. We have developed a prototype with our template with the purpose to simulate the configura-tion of a multi-criteria problem. We invited real decision-makers to use our prototype in a simulated scenario and asked to them to fulfil a survey in the end in order to study our hypotheses. Our general template achieved good results and proved to be very percepti-ble and fast to configure.
Cabral, Maria Fernanda Costa,Martinho, Roberto Luiz de Menezes,Guedes-Neto, Manoel Valcacio,Rebelo, Maria Augusta Bessa,Pontes, Danielson Guedes,Cohen-Carneiro, Flavia The Korean Academy of Conservative Dentistry 2015 Restorative Dentistry & Endodontics Vol.40 No.3
Objectives: The aim of this study was to evaluate the fluoride release of conventional glass ionomer cements (GICs) and resin-modified GICs. Materials and Methods: The cements were grouped as follows: G1 (Vidrion R, SS White), G2 (Vitro Fil, DFL), G3 (Vitro Molar, DFL), G4 (Bioglass R, Biodinamica), and G5 (Ketac Fil, 3M ESPE), as conventional GICs, and G6 (Vitremer, 3M ESPE), G7 (Vitro Fil LC, DFL), and G8 (Resiglass, Biodinamica) as resin-modified GICs. Six specimens (8.60 mm in diameter; 1.65 mm in thickness) of each material were prepared using a stainless steel mold. The specimens were immersed in a demineralizing solution (pH 4.3) for 6 hr and a remineralizing solution (pH 7.0) for 18 hr a day. The fluoride ions were measured for 15 days. Analysis of variance (ANOVA) and Tukey's test with 5% significance were applied. Results: The highest amounts of fluoride release were found during the first 24 hr for all cements, decreasing abruptly on day 2, and reaching gradually decreasing levels on day 7. Based on these results, the decreasing scale of fluoride release was as follows: G2 > G3 > G8 = G4 = G7 > G6 = G1 > G5 (p < 0.05). Conclusions: There were wide variations among the materials in terms of the cumulative amount of fluoride ion released, and the amount of fluoride release could not be attributed to the category of cement, that is, conventional GICs or resin-modified GICs.
BEYOND THE TOUCH: ANALYZING THE PURCHASING BEHAVIOUR USING AUGMENTED REALITY AND ONLINE REVIEWS
Aihoor Kayoom Aleem,Sandra Maria Correia Loureiro,J?ssica Francisco Martinho 글로벌지식마케팅경영학회 2023 Global Marketing Conference Vol.2023 No.07
One of the main challenges brands face nowadays is the ability to provide a real-life experience through online platforms. The aim of this study is to analyze an AR try-on app versus a website, considering consumers self-concept and testimonials. To this end, an online survey was conducted, in which respondents were exposed to two of four scenarios: AR APP or website experience, and positive versus negative reviews presence. Our findings indicate that ideal self-congruence impacts both, purchase intention and confidence. The present study positively contributes to the AR and self-concept literature, while opening new avenues of research for both academics and practitioners.
Maria Fernanda Costa Cabral,Roberto Luiz de Menezes Martinho,Manoel Valcácio Guedes-Neto,Maria Augusta Bessa Rebelo,Danielson Guedes Pontes,Flávia Cohen-Carneiro 대한치과보존학회 2015 Restorative Dentistry & Endodontics Vol.40 No.3
Objectives: The aim of this study was to evaluate the fluoride release of conventional glass ionomer cements (GICs) and resin-modified GICs. Materials and Methods: The cements were grouped as follows: G1 (Vidrion R, SS White), G2 (Vitro Fil, DFL), G3 (Vitro Molar, DFL), G4 (Bioglass R, Biodinâmica), and G5 (Ketac Fil, 3M ESPE), as conventional GICs, and G6 (Vitremer, 3M ESPE), G7 (Vitro Fil LC, DFL), and G8 (Resiglass, Biodinâmica) as resin-modified GICs. Six specimens (8.60 mm in diameter; 1.65 mm in thickness) of each material were prepared using a stainless steel mold. The specimens were immersed in a demineralizing solution (pH 4.3) for 6 hr and a remineralizing solution (pH 7.0) for 18 hr a day. The fluoride ions were measured for 15 days. Analysis of variance (ANOVA) and Tukey’s test with 5% significance were applied. Results: The highest amounts of fluoride release were found during the first 24 hr for all cements, decreasing abruptly on day 2, and reaching gradually decreasing levels on day 7. Based on these results, the decreasing scale of fluoride release was as follows: G2 > G3 > G8 = G4 = G7 > G6 = G1 > G5 (p < 0.05). Conclusions: There were wide variations among the materials in terms of the cumulative amount of fluoride ion released, and the amount of fluoride release could not be attributed to the category of cement, that is, conventional GICs or resin-modified GICs.
de Sá Maria Aparecida Barbosa,Nunes Eduardo,Antunes Alberto Nogueira da Gama,Brito Júnior Manoel,Horta Martinho Campolina Rebello,Amaral Rodrigo Rodrigues,Cohen Stephen,Silveira Frank Ferreira 대한치과보존학회 2021 Restorative Dentistry & Endodontics Vol.46 No.4
Objectives This study evaluates the bond strength and marginal adaptation of mineral trioxide aggregate (MTA) Repair HP and Biodentine used as apical plugs; MTA was used as reference material for comparison. Materials and Methods A total of 30 single-rooted teeth with standardized, artificially created open apices were randomly divided into 3 groups (n = 10 per group), according to the material used to form 6-mm-thick apical plugs: group 1 (MTA Repair HP); group 2 (Biodentine); and group 3 (white MTA). Subsequently, the specimens were transversely sectioned to obtain 2 (cervical and apical) 2.5-mm-thick slices per root. Epoxy resin replicas were observed under a scanning electron microscope to measure the gap size at the material/dentin interface (the largest and smaller gaps were recorded for each replica). The bond strength of the investigated materials to dentin was determined using the push-out test. The variable bond strengths and gap sizes were evaluated independently at the apical and cervical root dentin slices. Data were analyzed using descriptive and analytic statistics. Results The comparison between the groups regarding the variables' bond strengths and gap sizes showed no statistical difference (p > 0.05) except for a single difference in the smallest gap at the cervical root dentin slice, which was higher in group 3 than in group 1 (p < 0.05). Conclusions The bond strength and marginal adaptation to root canal walls of MTA HP and Biodentine cement were comparable to white MTA. Objectives This study evaluates the bond strength and marginal adaptation of mineral trioxide aggregate (MTA) Repair HP and Biodentine used as apical plugs; MTA was used as reference material for comparison. Materials and Methods A total of 30 single-rooted teeth with standardized, artificially created open apices were randomly divided into 3 groups (n = 10 per group), according to the material used to form 6-mm-thick apical plugs: group 1 (MTA Repair HP); group 2 (Biodentine); and group 3 (white MTA). Subsequently, the specimens were transversely sectioned to obtain 2 (cervical and apical) 2.5-mm-thick slices per root. Epoxy resin replicas were observed under a scanning electron microscope to measure the gap size at the material/dentin interface (the largest and smaller gaps were recorded for each replica). The bond strength of the investigated materials to dentin was determined using the push-out test. The variable bond strengths and gap sizes were evaluated independently at the apical and cervical root dentin slices. Data were analyzed using descriptive and analytic statistics. Results The comparison between the groups regarding the variables' bond strengths and gap sizes showed no statistical difference (p > 0.05) except for a single difference in the smallest gap at the cervical root dentin slice, which was higher in group 3 than in group 1 (p < 0.05). Conclusions The bond strength and marginal adaptation to root canal walls of MTA HP and Biodentine cement were comparable to white MTA.