http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Lago, Bruno Dal Korea Concrete Institute 2017 International Journal of Concrete Structures and M Vol.11 No.2
The control of the deformative behaviour of pre-stressed concrete roof elements for a satisfactory service performance is a main issue of their structural design. Slender light-weight wing-shaped roof elements, typical of the European heritage, are particularly sensitive to this problem. The paper presents the results of deformation measurements during storage and of both torsional-flexural and purely flexural load tests carried out on a full-scale 40.5 m long innovative wing-shaped roof element. An element-based simplified integral procedure that de-couples the evolution of the deflection profile with the progressive shortening of the beam is adopted to catch the experimental visco-elastic behaviour of the element and the predictions are compared with normative close-form solutions. A linear 3D fem model is developed to investigate the torsional-flexural behaviour of the member. A mechanical non-linear beam model is used to predict the purely flexural behaviour of the roof member in the pre- and post-cracking phases and to validate the loss prediction of the adopted procedure. Both experimental and numerical results highlight that the adopted analysis method is viable and sound for an accurate simulation of the service behaviour of precast roof elements.
Seismic Performance of High-rise Concrete Buildings in Chile
Lagos, Rene,Kupfer, Marianne,Lindenberg, Jorge,Bonelli, Patricio,Saragoni, Rodolfo,Guendelman, Tomas,Massone, Leonardo,Boroschek, Ruben,Yanez, Fernando Council on Tall Building and Urban Habitat Korea 2012 International journal of high-rise buildings Vol.1 No.3
Chile is characterized by the largest seismicity in the world which produces strong earthquakes every $83{\pm}9years$ in the Central part of Chile, where it is located Santiago, the capital of Chile. The short interval between large earthquakes magnitude 8.5 has conditioned the Chilean seismic design practice to achieve almost operational performance level, despite the fact that the Chilean Code declares a scope of life safe performance level. Several Indexes have been widely used throughout the years in Chile to evaluate the structural characteristics of concrete buildings, with the intent to find a correlation between general structural conception and successful seismic performance. The Indexes presented are related only to global response of buildings under earthquake loads and not to the behavior or design of individual elements. A correlation between displacement demand and seismic structural damage is presented, using the index $H_o/T$ and the concrete compressive strain ${\varepsilon}_c$. Also the Chilean seismic design codes pre and post 2010 Maule earthquake are reviewed and the practice in seismic design vs Performance Based Design is presented. Performance Based Design procedures are not included in the Chilean seismic design code for buildings, nevertheless the earthquake experience has shown that the response of the Chilean buildings has been close to operational. This can be attributed to the fact that the drift of most engineered buildings designed in accordance with the Chilean practice falls below 0.5%. It is also known by experience that for frequent and even occasional earthquakes, buildings responded elastically and thus with "fully operational" performance. Taking the above into account, it can be said that, although the "basic objective" of the Chilean code is similar to the SEAOC VISION2000 criteria, the actual performance for normal buildings is closer to the "Essential/Hazardous objective".
Lago, Taynara G.S.,Ismail, Kamal A.R.,Nobrega, Claudia R.E.S.,Moura, Luiz F.M. Techno-Press 2020 Advances in energy research Vol.7 No.1
Energy consumption of air-conditioning and refrigeration systems is responsible for about 25 to 30% of the energy demand especially in hot seasons. This equipment is mostly electricity dependent and their use in principle affects negatively the environment. Enhancing the energy efficiency of the existing equipment is important as one of the measures to reduce environment impacts. This paper reports the results of an experimental study to evaluate the impacts of the use electronic expansion valve and variable velocity compressor on the performance of vapor compression refrigeration system. The experimental rig is composed of two independent circuits one for the vapor compression system and the other is the secondary fluid system. The vapor compression system is composed of a forced air condenser unit, evaporator, hermetic compressor and expansion elements, while the secondary system has a pump for circulating the secondary fluid, and an air conditioning heat exchanger. The manufacturer's data was used to determine the optimal points of operation of the system and consequently tests were done to evaluate the influence of variation of the compressor velocity and the opening of the expansion device on the performance of the refrigeration system. A fuzzy logic model was developed to control the rotational velocity of the compressor and the thermal load. Fuzzy control model was made in LabVIEW software with the objective of improving the system performance, stability and energy saving. The results showed that the use of fuzzy logic as a form of control strategy resulted in a better energy efficiency.
Lagos de Melo Larissa Pereira,Queiroz Polyane Mazucatto,Moreira-Souza Larissa,Nadaes Mariana Rocha,Santaella Gustavo Machado,Oliveira Matheus Lima,Freitas Deborah Queiroz 대한치과보존학회 2023 Restorative Dentistry & Endodontics Vol.48 No.2
Objectives The aim of this study was to evaluate the influence of peak kilovoltage (kVp) and a metal artifact reduction (MAR) tool on image quality and the diagnosis of vertical root fracture (VRF) in cone-beam computed tomography (CBCT). Materials and Methods Twenty single-rooted human teeth filled with an intracanal metal post were divided into 2 groups: control (n = 10) and VRF (n = 10). Each tooth was placed into the socket of a dry mandible, and CBCT scans were acquired using a Picasso Trio varying the kVp (70, 80, 90, or 99), and the use of MAR (with or without). The examinations were assessed by 5 examiners for the diagnosis of VRF using a 5-point scale. A subjective evaluation of the expression of artifacts was done by comparing random axial images of the studied protocols. The results of the diagnoses were analyzed using 2-way analysis of variance and the Tukey post hoc test, the subjective evaluations were compared using the Friedman test, and intra-examiner reproducibility was evaluated using the weighted kappa test (α = 5%). Results The kVp and MAR did not influence the diagnosis of VRF (p > 0.05). According to the subjective classification, the 99 kVp protocol with MAR demonstrated the least expression of artifacts, while the 70 kVp protocol without MAR led to the most artifacts. Conclusions Protocols with higher kVp combined with MAR improved the image quality of CBCT examinations. However, those factors did not lead to an improvement in the diagnosis of VRF. Objectives The aim of this study was to evaluate the influence of peak kilovoltage (kVp) and a metal artifact reduction (MAR) tool on image quality and the diagnosis of vertical root fracture (VRF) in cone-beam computed tomography (CBCT). Materials and Methods Twenty single-rooted human teeth filled with an intracanal metal post were divided into 2 groups: control (n = 10) and VRF (n = 10). Each tooth was placed into the socket of a dry mandible, and CBCT scans were acquired using a Picasso Trio varying the kVp (70, 80, 90, or 99), and the use of MAR (with or without). The examinations were assessed by 5 examiners for the diagnosis of VRF using a 5-point scale. A subjective evaluation of the expression of artifacts was done by comparing random axial images of the studied protocols. The results of the diagnoses were analyzed using 2-way analysis of variance and the Tukey post hoc test, the subjective evaluations were compared using the Friedman test, and intra-examiner reproducibility was evaluated using the weighted kappa test (α = 5%). Results The kVp and MAR did not influence the diagnosis of VRF (p > 0.05). According to the subjective classification, the 99 kVp protocol with MAR demonstrated the least expression of artifacts, while the 70 kVp protocol without MAR led to the most artifacts. Conclusions Protocols with higher kVp combined with MAR improved the image quality of CBCT examinations. However, those factors did not lead to an improvement in the diagnosis of VRF.
Gisele Lago Martinez,Josely Correa Koury,Marcela Anjos Martins,Fernanda Nogueira,Ricardo Guimarães Fischer,Anders Gustafsson,Carlos Marcelo S Figueredo 대한치주과학회 2014 Journal of Periodontal & Implant Science Vol.44 No.4
Purpose: We aimed to investigate the impact of nonsurgical periodontal treatment combined with one-year dietary supplementation with omega (ω)-3 on the serum levels of eicosapentaenoic acid (EPA), docosahexaenoic acid (DHA), docosapentaenoic acid (DPA), and arachidonic acid (AA). Methods: Fifteen patients with chronic generalized periodontitis were treated with scaling and root planing. The test group consisted of seven patients (43.1±6.0 years) supplemented with ω-3, consisting of EPA plus DHA, three capsules, each of 300 mg of ω-3 (180-mg EPA/120-mg DHA), for 12 months. The control group was composed of eight patients (46.1±11.6 years) that took a placebo capsule for 12 months. The periodontal examination and the serum levels of DPA, EPA, DHA, and AA were performed at baseline (T0), and 4 (T1), and 12 (T2) months after therapy. Results: In the test group, AA and DPA levels had been reduced significantly at T1 (P<0.05). AA and EPA levels had been increased significantly at T2 (P<0.05). The ΔEPA was significantly higher in the test compared to the placebo group at T2–T0 (P=0.02). The AA/EPA had decreased significantly at T1 and T2 relative to baseline (P<0.05). Conclusions: Nonsurgical periodontal treatment combined with ω-3 supplementation significantly increased the EPA levels and decreased the AA/EPA ratio in serum after one year follow-up. However, no effect on the clinical outcome of periodontal therapy was observed.
Martinez, Gisele Lago,Koury, Josely Correa,Martins, Marcela Anjos,Nogueira, Fernanda,Fischer, Ricardo Guimaraes,Gustafsson, Anders,Figueredo, Carlos Marcelo S. Korean Academy of Periodontology 2014 Journal of Periodontal & Implant Science Vol.44 No.4
Purpose: We aimed to investigate the impact of nonsurgical periodontal treatment combined with one-year dietary supplementation with omega (${\omega}$)-3 on the serum levels of eicosapentaenoic acid (EPA), docosahexaenoic acid (DHA), docosapentaenoic acid (DPA), and arachidonic acid (AA). Methods: Fifteen patients with chronic generalized periodontitis were treated with scaling and root planing. The test group consisted of seven patients ($43.1{\pm}6.0$ years) supplemented with ${\omega}$-3, consisting of EPA plus DHA, three capsules, each of 300 mg of ${\omega}$-3 (180-mg EPA/120-mg DHA), for 12 months. The control group was composed of eight patients ($46.1{\pm}11.6$ years) that took a placebo capsule for 12 months. The periodontal examination and the serum levels of DPA, EPA, DHA, and AA were performed at baseline (T0), and 4 (T1), and 12 (T2) months after therapy. Results: In the test group, AA and DPA levels had been reduced significantly at T1 (P<0.05). AA and EPA levels had been increased significantly at T2 (P<0.05). The ${\Delta}EPA$ was significantly higher in the test compared to the placebo group at T2-T0 (P=0.02). The AA/EPA had decreased significantly at T1 and T2 relative to baseline (P<0.05). Conclusions: Nonsurgical periodontal treatment combined with ${\omega}$-3 supplementation significantly increased the EPA levels and decreased the AA/EPA ratio in serum after one year follow-up. However, no effect on the clinical outcome of periodontal therapy was observed.