http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Experimental Study of the Dynamic Characteristics of Rubber Mounts for Agricultural Tractor Cabin
( Kyujeong Choi ),( Jooseon Oh ),( Davin Ahn ),( Young-jun Park ),( Sung-un Park ),( Heung-sub Kim ) 한국농업기계학회 2018 바이오시스템공학 Vol.43 No.4
Purpose: To obtain the dynamic characteristics (spring stiffness and damping coefficient) of a rubber mount supporting a tractor cabin in order to develop a simulation model of an agricultural tractor. Methods: The KS M 6604 rubber mount test method was used to test the dynamic characteristics of the rubber mount. Of the methods proposed in the standard, the resonance method was used. To perform the test according to the standard, a base excitation test device was constructed and the accelerations were measured. Results: Displacement transmissibility was measured by varying the frequency from 3-30 Hz. The vibration transmissibility at resonance was confirmed, and the dynamic stiffness and damping coefficient of the rubber mount were obtained. The front rubber mount has a spring constant of 1247 N/mm and damping ratio of 3.27 Ns/mm, and the rear rubber mount has a spring constant of 702 N/mm and damping ratio of 1.92 Ns/mm. Conclusions: The parameters in the z-direction were obtained in this study. In future studies, we will develop a more complete tractor simulation model if the parameters for the x- and y-directions can be obtained.
전기굴착기의 농작업기 장착을 위한 3점히치 및 회전작업을 위한 유압식 PTO 개발
최규정 ( Kyujeong Choi ),박진선 ( Jin-sun Park ),조승제 ( Seung-je Cho ),이상대 ( Sang-dae Lee ) 한국농업기계학회 2022 한국농업기계학회 학술발표논문집 Vol.27 No.2
최근 농업 환경이 변화하면서 친환경 하우스 농업, 스마트 유리온실의 비중이 증대되고 있으나, 시설 내부에서 내연기관을 이용하는 트랙터나 관리기를 사용할 때 발생하는 매연에 의해 농민들의 건강이 위협받고 있다. 건설기계 업계에서는 소형 전기굴착기를 개발하고 상용화에 성공하였으므로 소형 전기굴착기를 활용하여 농작업을 수행할 수 있다면 시설 내부에서의 매연 발생 문제의 해결 방안으로 기대할 수 있다. 농작업은 쟁기 작업과 같이 견인력만 사용하는 작업과 로타베이터, 배토기 작업과 같이 PTO(Power Take Off) 동력과 견인력을 같이 사용하는 작업으로 나눌 수 있다. 두 작업 모두 트랙터 후방에 장착된 3점히치를 사용하여 작업기를 부착하고 높낮이를 조절하여 적절한 깊이의 작업이 가능하도록 한다. 본 연구에서는 기존의 전기굴착기에 농작업기를 부착할 수 있도록 퀵커플러를 사용한 3점히치 구조물을 개발하였으며, 엔진 동력을 추출하여 작업기를 회전시키는 PTO를 대체하기 위하여 유압모터를 활용해 유압식 PTO(H-PTO)를 개발하였다. 또한 전기굴착기에 부착하여 작업 가능한 전용 부착작업기 2종(로타베이터, 배토기)을 개발하였다. 최종적으로 벤치테스트를 통해 H-PTO의 최대 출력 토크 217.0 N·m, 최대 회전속도 426.9 rpm 임을 확인하였으며 실차테스트를 통해 로타베이터 최대 회전속도 161.6 rpm, 배토기 최대 회전속도 146.1 rpm 임을 확인하고 농작업을 원활히 수행 가능함을 확인하였다.
최규정 ( Kyujeong Choi ),안다빈 ( Da-vin Ahn ),이진웅 ( Jinwoong Lee ),박영준 ( Young-jun Park ) 한국농업기계학회 2022 한국농업기계학회 학술발표논문집 Vol.27 No.2
듀얼 클러치 변속기는 홀수단과 짝수단의 클러치를 신속하게 제어해야 하므로 일반적으로 반응이 빠르고 제어가 용이한 전자비례감압밸브를 사용하여 클러치 제어를 수행한다. 전진/후진 클러치, 홀수/짝수 클러치, 주변속 싱크로나이저 제어에 모두 전자비례감압밸브를 사용하기 때문에 다양한 변속 조건에서 원활한 클러치 제어를 수행하기 위해서는 디지털 트윈을 사용한 제어로직 검증이 필요하다. 본 연구에서는 듀얼 클러치 변속기의 클러치 제어 연구를 위하여 전자비례감압밸브의 디지털 트윈을 개발하였다. 전자비례감압밸브를 분해하고 3D 스캐닝을 진행하여 CAD로 역설계를 수행했다. 또한 전자비례감압밸브의 특성을 결정하는 중요한 요소인 솔레노이드의 전자기력 특성을 확보하기 위해 인장압축 시험기를 사용하여 전류와 변위에 따른 흡인력 특성을 확보하였다. 유압 테스트벤치 시험을 통해 전자비례감압밸브의 정특성과 동특성을 확보하였으며, 최종적으로 1D 시스템 해석 소프트웨어를 사용하여 전자비례감압밸브의 디지털 트윈을 개발하고 밸브 특성시험 결과와 디지털 트윈의 결과를 비교하였다.
Preparation of porous sheets with high mechanical strength by the addition of cellulose nanofibrils
Sim, Kyujeong,Youn, Hye Jung BLACKIE ACADEMIC & PROFESSIONAL 2016 CELLULOSE Vol. No.
<P>Porous sheets with high mechanical strength were prepared with natural pulp fibers (hardwood and softwood bleached kraft pulp) and polyethylene terephthalate (PET) by adding cellulose nanofibrils (CNF) through a wet-laid forming method. The structure and mechanical properties of the porous sheets were investigated in this study depending on the type of mixed fibers, the CNF ratio, and drying methods (cylinder-drying and freeze-drying). The apparent density and porosity of porous sheets changed according to the morphology of the mixed fibers. PET fibers resulted in a sheet with a bulkier structure, whereas natural pulp fibers produced relatively dense sheets. Sheets with high porosity could be prepared by freeze-drying due to the inhibition of hydrogen bonds and low shrinkage during drying. Pore characteristics were evaluated in terms of air permeability and average pore diameter. The air permeability of porous sheets decreased as the amount of CNF increased. Mercury porosimetry showed that the average pore diameter in sheets ranged from 0.6 to 36.7 A mu m depending on the type and mixing ratio of fibers and drying conditions. Sheet tensile properties were improved by the addition of CNF and changed depending on mixing combinations and drying methods. The applicability of freeze-dried porous sheets as filter media was examined by evaluating the filtration efficiency and pressure drop. Porous sheets with a HwBKP/CNF combination showed a filtration efficiency of 99.944 %, which approached the efficiency of a high efficiency particulate air filter. However, further study is required to reduce the pressure drop during filtration for better use as an air filter.</P>
도공원지의 원료 조성 및 구조에 따른 고평량 도공지의 접힘 터짐
심규정(Kyujeong Sim),윤혜정(Hye Jung Youn),오규덕(Kyudeok Oh),이학래(Hak Lae Lee),여승욱(Seung Uk Yeu),이용민(Yong Min Lee) 한국펄프·종이공학회 2015 펄프.종이기술 Vol.47 No.4
Fold cracking is one of quality troubles of coated papers. In this study, the fold cracking of high grammage (250 g/㎡) coated paper made with the different pulp composition and layer structure of base paper was investigated. The single layered, high grammage base paper was prepared by mixing of hardwood and softwood bleached kraft pulp fibers with the different ratios. The high grammage coated paper showed the higher fold cracking than low grammage coated paper because of the increase in thickness. The increase in the content of softwood pulp fibers reduced the fold cracking in the case of high grammage coated paper. When the creasing process was conducted before folding process, the fold cracking of coated paper decreased. By manufacturing the base paper with multiply structure, the fold cracking of coated paper could be reduced significantly, especially when the BCTMP and OCC were used as a middle layer and the creasing process was carried out. The delamination of layers in base paper affected the fold cracking positively.