http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
증례 : 장티푸스환장에서 발생한 일과성 신성당뇨의 1 예
박종남 ( Chong Nam Park ),최동진 ( Dong Jin Choi ),염광섭 ( Kwang Sub Yeom ),김연길 ( Yeon Kil Kim ),강우형 ( Woo Hyung Kang ),김병조 ( Byung Jo Kim ) 대한내과학회 1971 대한내과학회지 Vol.14 No.12
Transient renal glycosuria was observed in a 22-years-old Korean male soldier who was admitted in the Tri-Service Army Hospital in Kwang-ju with definitive clinical symptoms of typhoid fever. The diagnosis was confirmed with positive serological, bacteriol
유압 천공데이터를 이용한 터널 굴진면 전방 지질상태 예측
김광염 ( Kwang Yeom Kim ),김창용 ( Chang Yong Kim ),김광식 ( Kwang Sik Kim ),임성빈 ( Sung Bin Yim ),서경원 ( Kyoung Won Seo ) 대한지질공학회 2009 지질공학 Vol.19 No.4
터널 및 지하구조물 시공 중 굴착 대상 지반에 대한 정확한 정보 획득은 작업의 효율성과 안전성을 위해 매우 중요하다. 본 연구에서는 굴착 중 굴진 대상 암반의 지질 구조를 신속하고 정확하게 감지하기 위하여 천공탐사 기법을 이용하였다. 유압 착암기 천공 시 발생하는 천공속도, 회전압, 피드압 등의 기계량을 측정하여 분석하였으며, 이를 통해 암석과 지질구조적 특성에 의해 변화되는 암반 특성을 평가 하였다. 터널 시공현장에서 굴착 중 획득된 천공데이터 분석에 의해 평가된 암반 정보는 굴착 전 수행된 선진수평시추 및 TSP 탐사 결과와 비교하여 신뢰성을 검토하였으며, 그 결과 천공 데이터의 변화가 암반 특성 및 불연속면 예측을 위해 효율적으로 활용될 수 있음을 확인하였다. During construction of a tunnel and underground structure, it is very important to acquire accurate information of the rock mass will be excavated. In this study, the drill monitoring method was applied for rapid prediction of geological condition ahead of the tunnel face. Mechanical data(speed, torque and feed pressure) from drilling process using a hydraulic drilling machine were analyzed to assess rock mass characteristics. Rock mass information acquired during excavation from drilling monitoring were compared with results from horizontal boring and tunnel seismic profiling(TSP). As the result, the drilling monitoring method is useful to assess rock mass condition such as geological structures and physical properties ahead of the tunnel face.
김광염(Kwang-Yeom Kim),김창용(Chang-Yong Kim),김광식(Kwang-Sik Kim) 한국암반공학회 2008 터널과지하공간 Vol.18 No.6
천공탐사는 암반 굴착시 점보드릴의 유압착암기로부터 계측되는 기계량들인 천공데이터를 분석하여 암반의 특성을 평가하는 기법이다. 천공탐사는 발파공 또는 록볼트공 천공시 실시간으로 계측할 수 있기 때문에 암반을 신속하고 정량적으로 예측 및 평가할 수 있는 장점이 있다. 현재까지도 천공데이터에 관한 다양한 연구가 수행되어져오고 있지만, 암반 특성을 평가하기 위한 천공파라미터들의 항목 선정과 기계량들의 수치적인 정량화가 정립되어있지 않은 실정이다. 따라서 본 연구에서는 암석 및 지반 특성을 평가할 수 있는 천공파라미터의 항목 선정 및 천공시 천공데이터들 간의 관계를 파악하기 위해 균질 모형 암석 시험편을 제작하여 천공데이터를 획득하였고, 획득된 천공데이터를 이용하여 천공파라미터들의 상관관계 분석을 수행하였다. 분석 결과를 통해 유압착암기의 굴착능력은 타격에 의해 가장 큰 영향을 받음을 확인하였다. The drilling monitoring is a technique to assess rock mass properties by analyzing the mechanical quantities measured by drilling process. Since drilling survey can be conducted on real-time-basis for excavating blast holes or rockbolt holes, it may enables fast and quantitative prediction and evaluation of rock mass. Though a number of studies have been conducted on the drilling data, the selection of drilling parameters and numerical quantification of mechanical quantities or rock mass have not been well established yet. In this study, drilling tests were conducted with homogeneous rock specimen to identify drilling parameters and the relation of the drilling data. As a result, it is verified that above all drilling parameters, the percussion was the most important factor on the excavatability of hydraulic drilling.
김광염(Kwang-Yeom Kim),김성권(Sung-Kwon Kim),김창용(Chang-Yong Kim),김광식(Kwang-Sik Kim) 한국암반공학회 2009 터널과지하공간 Vol.19 No.6
터널 굴착시 굴진면 전방의 지반상태를 사전에 파악하는 것은 터널의 안정성을 증가시킴과 동시에 시공성을 향상시켜 경제적인 터널 시공을 할 수 있도록 한다. 이에 본 연구에서는 터널 천공시 획득되는 천공데이터를 이용하여 굴진면 전방의 암반강도를 예측하고자 하였다. 이는 암반강도가 현장에서 암반분류 및 지보패턴 설계등의 핵심인자로 가장 보편적으로 활용될 뿐만 아니라, 암반강도의 변화를 통해 굴진면 전방의 지반상태 변화를 예측하는데도 활용할 수 있기 때문이다. 이를 위해 본 연구에서는 다양한 강도 특성을 보이는 균질한 암석시험편을 대상으로 착암기 종류를 변화시켜가며 천공실험을 수행하였다. 실험결과 천공속도는 다른 천공데이터들과 착암기의 종류 및 암석의 강도에 따라 고유한 값을 보이는 것으로 나타났다. 또한, 동일한 암석에 대해 천공시 타격압이 증가하면 천공속도는 선형적으로 비례하여 증가하는 것으로 나타났다. 이러한 결과를 바탕으로 본 연구에서는 터널 시공 현장에서 착암기의 제원, 현장 계측 데이터 및 천공속도와 암반강도의 상관관계를 이용하여 터널 굴진면 전방의 암반강도를 예측할 수 있는 방안을 제안하였다. Appropriate investigation of ground condition near excavation face in tunnelling is an inevitable process for safe and economical construction. In this study mechanical parameters from drilling process for blasting were investigated for the purpose of predicting the ground condition, especially rock mass strength, ahead of tunnel face. Rock mass strength is one of the most important factors for classification of rock mass and making a decision of support type in underground construction. Several rock specimens which are considered homogeneous and having different strength values respectively were tested by hydraulic drill machines generally used. As a result, penetration rate is fairly related with rock mass strength among drilling parameters. It is also found that penetration rate increases along with the higher impact pressure even under same rock strength condition. It is finally suggested that new prediction method for rock mass strength using percussive pressure and penetration rate during drilling work can be utilized well in construction site.