http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Nanoelectromechanical Resonator Design and Performance Analysis
Kouh, T. J.,Kim, D. H.,Ekinci, K. L. 한국공작기계학회 2004 한국공작기계학회 춘계학술대회논문집 Vol.2004 No.-
We describe a method for the detection of nanometer scale displacements of nanoelectromechanical resonators. We also present an analysis of the mechanical motion of these devices. We evaluate the effectiveness of the detection technique by detecting displacements from a series of nanomechanical doubly clamped beam resonators with decreasing dimensions.
A Soft Robotics Nonlinear Hybrid Position/Force Control for Tendon Driven Catheters
Minou Kouh Soltani,Sohrab Khanmohammadi,Farzan Ghalichi,Farrokh Janabi-Sharifi 제어·로봇·시스템학회 2017 International Journal of Control, Automation, and Vol.15 No.1
Minimally invasive steerable catheters, commonly implemented in cardiac ablation, are currently operatedby interventionalists exposing them to X-ray radiation and requiring the dexterity for accurate steering. Toconduct robot-assisted cardiac ablation, highly accurate stable control platform for precise force/position controlon the moving tissue is required. This paper introduces hybrid force/position control strategy to apply a constantforce to the cardiac tissue while tracking the desired trajectory. The position controller is based on a nonlinearmodel predictive tracking control satisfying the input constraints. Cosserat rod theory is incorporated for the distalshaft modeling of tendon-driven catheters, and the model is reformulated for controller design and stabilityproof. Lyapunov-based stability analysis is conducted. To apply the controller, the force-displacement mapping ofthe cardiac tissue is obtained through ex vivo experimental tests. The performance of the controller is evaluated,and the catheter is capable of regulating the force with the RMSE of 4.9 mN and tracking the position with theRMSE of 0.89 mm. The promising results verify the potential of the application of the introduced approach in realapplications including in vitro and clinical cardiac ablation.
나노구조 박막의 Morphology에 따른 초전도 특성 변화에 관한 연구
고태준(Taejoon Kouh) 한국자기학회 2006 韓國磁氣學會誌 Vol.16 No.1
Transport and tunneling measurements of nanostructured superconducting thin films are presented. To understand the effects of film morphology on their superconducting properties, thermal annealing experiments have been performed. The transition temperature increases with thermal annealing temperature towards the bulk value. Also, thermal annealing results in a shift of transverse phonon mode. These can be understood with changes in film morphology and suggest its importance on the superconducting state properties.
Nanoelectromechanical Resonator Design and Performance Analysis
T. J. Kouh,D. H. Kim,K. L. Ekinci 한국생산제조학회 2004 한국공작기계학회 춘계학술대회논문집 Vol.2004 No.-
We describe a method for the detection of nanometer scale displacements of nanoelectromechanical resonators. We also present an analysis of the mechanical motion of these devices. We evaluate the effectiveness of the detection technique by detecting displacements from a series of nanomechanical doubly clamped beam resonators with decreasing dimensions.
Annealing에 의한 나노구조 박막의 전기적 특성 연구
고태준(Taejoon Kouh) 한국자기학회 2006 韓國磁氣學會誌 Vol.16 No.1
Electron transport properties of nanostructured Pb thin film, consisting of grains, have been studied. Nanostructured thin films were fabricated on a substrate held at low temperature and their thicknesses were less than 10 ㎚. While temperature of the film increased from 1.3 K to room temperature, the change in normal state sheet resistance has been measured. As the annealing temperature varies, the normal state sheet resistance shows a non-monotonic and irreversible change. Such behavior can be understood with the Pb grain growth due to annealing of the film.
자바 프로그램의 논리적인 오류를 찾기 위한 HDTS 시스템의 설계
고훈준 ( Hoon-joon Kouh ) 한국정보처리학회 2004 한국정보처리학회 학술대회논문집 Vol.11 No.2
이전 논문은 자바 프로그램 내에 포함된 논리적인 오류를 발견하기 위해 HDTS 기술을 제안하였다. HDTS 는 알고리즈믹 프로그램 디버깅 기술, 단계적 프로그램 디버깅 기술, 그리고 프로그램 할을 혼합하여 효율적으로 논리적인 오류가 포함된 프로그램을 디버깅하는 기술이다. 본 논문에서는 HDTS 기술을 구현하기 위한 HDTS 시스템을 설계한다.
LCD 패널의 불량을 검출하는 검사용 LED BLU 개발
고훈준(Hoon-Joon Kouh),장경수(Kyung-Soo Jang),오주영(Ju-Young Oh) 한국콘텐츠학회 2010 한국콘텐츠학회논문지 Vol.10 No.5
LCD 패널은 자체적으로 발광할 수 없어 외부 광원인 BLU가 필요하다. BLU는 LCD 모듈에 포함되어 사용되고 LCD 패널의 불량을 검사하는 테스터에서도 사용된다. 최근에는 BLU가 CCFL에서 LED로 빠르게 변화되고 증가해왔다. CCFL은 초고압 전원이 필요하고, 열도 많이 발생하며, 일정한 휘도를 유지하기가 어렵다. LED는 전력소모량이 적고, 일정한 휘도를 유지한다. 그러나 현재 테스터에서 사용되는 BLU는 CCFL을 사용하고 있다. 본 연구에서는 LCD 패널의 불량을 검사할 수 있는 검사용 LED BLU를 개발한다. 또한 12~24인치의 LCD 패널을 모두 검사할 수 있도록 LED BLU를 24인치 크기로 제작하고 LCD 패널의 크기에 따라 LED BLU가 동작하도록 개발한다. LCD panel need BLU(Back Light Unit) that is outside source of light because can not emit light voluntarily. BLU is used in LCD module and is used in tester that examine LCD panel's badness. Lately, BLU had changed from CCFL(Cold Cathode Fluorescent Lamp) to LED(Light-Emitting Diode) fast. CCFL need extra-high tension power and produce much heat and is difficult to keep fixed brightness. LED is few electric power wastage and keeps fixed brightness. But, BLU that is used to detector that examine the LCD module is using CCFL until recently. This paper develops LED BLU that can examine LCD panel's badness. Also, this manufactures LED BLU to 24 inch size to examine all LCD panels(12∼24 inch), and develops so that LED BLU may operate according to LCD panel's size.
고훈준(Hoon-Joon Kouh),류진수(Chin-Su Ryu),김기태(Ki-Tae Kim),유원희(Weon-Hee Yoo) 한국정보과학회 2001 한국정보과학회 학술발표논문집 Vol.28 No.1A
테스트 시스템(Test System)은 반도체 제품을 웨이퍼(Wafer) 또는 완성된 제품 상태 하에서 전기적 특성과 성능을 검사하고 그 결과를 산출해내는 검사장치이다. 테스트 시스템은 크게 하드웨어와 소프트웨어로 이루어져 있으며 시스템을 제어하고 사용자 인터페이스 및 각종 자료를 처리하는 소프트웨어는 그 중요성이 한층 더 부각되고 있다. 그러나 국내 고성능의 테스트 시스템을 개발하는 기업들의 하드웨어 테스트 시스템에서 사용하고 있는 테스트 프로그램언어와 컴파일러의 문제점을 지적하고, 문제점을 해결할 수 있는 프로그래밍 언어 T를 설계한다. 그리고 그 언어를 컴파일 할 수 있다. 번역기를 설계하여 테스트 관리 시스템의 소프트웨어를 향상시키고자 한다.
비평가인자 함수프로그램을 다중스레드 코드로 변환하기 위한 번역기의 설계
고훈준(Hoon-Joon Kouh),양창모(Chang-Mo Yang),유원희(Weon-Hee Yoo) 한국정보과학회 1999 한국정보과학회 학술발표논문집 Vol.26 No.1A
잠재적인 병렬성을 가지는 비평가인자 함수언어는 비평가인자 의미로 인한 미세 수준의 동적 스케쥴링과 동기화가 요구된다. 다중스레드 모델은 데이터플로우 모델과 폰 노이만 모델을 결합하여 지연 시간, 동적 스케쥴링, 동기화 문제를 해결하기 위한 효과적인 병렬처리 모델이다. 이러한 병렬처리 모델은 고급 언어와 스레드의 형태에 따라 효율성이 결정된다. 본 논문에서는 잠재적인 병렬성을 가지는 비평가인자 함수언어(non-strict functional language: NFL)를 중간언어인 커널언어(kernel language: Kl)로 변환을 한다. 다음에 이 Kl를 데이터플로우 그래프로 거쳐 병렬처리를 할 수 있는 다중스레드 코드로 번역하는 효율적인 번역기를 설계, 구현한다.