http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
임플란트 hexagon 높이에 따른 임플란트와 주위 조직의 응력분포 평가
박성재,김주현,김소연,윤미정,고석민,허중보 대한치과보철학회 2012 대한치과보철학회지 Vol.50 No.1
PURPOSE. To analyze the stress distribution of the implant and its supporting structures through 3D finite elements analysis for implants with different hexagon heights and to make the assessment of the mechanical stability and the effect of the elements. MATERIALS AND METHODS. Infinite elements modeling with CAD data was designed. The modeling was done as follows; an external connection type ∅4.0 mm×11.5 mm OsstemUSII (Osstem Co., Pusan, Korea) implant system was used, the implant was planted in the mandibular first molar region with appropriate prosthetic restoration, the hexagon (implant fixture’s external connection) height of 0.0, 0.7, 1.2, and 1.5 mm were applied. ABAQUS 6.4 (ABAQUS, Inc., Providence, USA) was used to calculate the stress value. The force distribution via color distribution on each experimental group’s implant fixture and titanium screw was studied based on the equivalent stress (von Mises stress). The maximum stress level of each element (crown, implant screw, implant fixture, cortical bone and cancellous bone) was compared. RESULTS. The hexagonal height of the implant with external connection had an influence on the stress distribution of the fixture, screw and upper prosthesis and the surrounding supporting bone. As the hexagon height increased, the stress was well distributed and there was a decrease in the maximum stress value. If the height of the hexagon reached over 1.2 mm, there was no significant influence on the stress distribution. CONCLUSION. For implants with external connections, a hexagon is vital for stress distribution. As the height of the hexagon increased, the more effective stress distribution was observed. 연구 목적: 본 연구는 hexagon 높이에 따른 임플란트 각 부위와 주위 지지조직의 응력분포를 3차원 유한요소 해석을 통해 평가하여 hexagon 높이가 기계적 안정성에 미치는 영향을 평가하고자 시행되었다. 연구 재료 및 방법: 외측 연결 형태의∅L4.0 mm×11.5 mm USII (Osstem Co., Pusan, Korea) 임플란트 시스템을 이용하여 하악 제 1대구치 부위에 임플란트를 식립하여 보철 수복한 경우를 연구 모델로 가정하고 임플란트 고정체의 외측 연결부인 hexagon의 높이를 각각 0.0 mm, 0.7 mm, 1.2 mm, 1.5 mm로 적용한 CAD data를 유한요소 모형화하였다. ABAQUS 6.4 (ABAQUS Inc., Providence, RI, USA)를 이용하여 산출된 응력 값 중에서 등가응력을 기준으로 각 요소(상부 치관, 지대주 나사, 고정체, 치밀골, 해면골)에서 나타나는 최대 응력 값을 비교 하였다. 결과:외측 연결을 갖는 임플란트의 hexagon의 높이는 고정체, 지대주 나사, 상부 보철물 그리고 주위 지지골에 대해 응력 분산에 영향을 주었다. Hexagon의 높이가 증가할 수록 임플란트의 응력 분산은 더 잘 이루어졌으며, 최대 응력 값의 감소를 보였다. Hexagon의 높이가 1.2 mm 이상이 되면 응력 분포에 더 이상 크게 기여하지 않았다. 결론: 외측연결을 갖는 임플란트에서 hexagon은 응력 분산에 필수적인 요소이며 그 높이가 증가할수록 더욱 효과적인 응력의 분산이 나타났다.
Purge & Trap-GC를 이용한 의약품 필름코팅 정제 중 잔류용제에 관한 연구
장준식,이명자,소유섭,문춘선,이주헌,박희라,김진숙,강경모,이선옥,방성연,유미자,유문균,금오성,이병욱 식품의약품안전청 2000 식품의약품안전청 연보 Vol.4 No.-
의약품은 약물을 생체에 적풋하기 위하여 유효성분의 효과가 언제나 일정하게 확보되고 사응에 편리하도록 만들어지는 것이므로 유효썽분 이외에 약효에 영향을 주지 않는 성분이 첨가되는 경운가 많다. 이 때 사용되는 용매들은 제피의 광택 및 건쪼시간의 단축 등을 위하여 휘발점이 낮을 용매들이 주로 사용되어진다. 본 연구는 의약품 필름코팅정제 중 잔류용매 4종(chlorofonr benzen, trichloro ethylen, 1,4-dioxane)에 대한 변형된 pirge & trap-GC 장치를 이용한 동시분석방법을 개발하였으며, 각 표준품의 RSD 값은 chloroform 3.03%, benzen 3.17%, trichloroethylen 3.69% and 1,4-dioxane 3.41%였다. 또한 시중 유통중인 의약품 50종에 대하여 잔류웅매 양을 측정하였으며, 검출되는 잔류용매는 한 건도 없었다. This study nras carried out to develope the analytical method for the mixture of chlorefonn, benzen, trichloroethylen and 1,4-dioxane simultaneously and determine the remainingorgauic solvents in coating tablets by Purge & Trap-GC. The results were as follouFs ; 1. Chloroform, benzen, trio:tloroethylen and 1,4-dioxane separated by tenax #5 trap by HP-624GC column by terrlperature programming. The peaks were separated completely at retentiontime of 6.88min for chloroform, 8.21min for benzen, 10.38miu for trichloroethylen and 11.95minfor 1,4-dioxane. 2. Standard RSD were individually chloroform 3.03%, benzen 3.17%, trichloroethylen 3.69%and 1,4-diorane 3.41%. 3. 60 samples were not detrcted chloroform, benzen, trichloroethylen and 1,4-dioxane.
정주현(Jung Joo-Hyeun),김세용(Kim Sei-Yong) 대한건축학회 2011 대한건축학회논문집 Vol.27 No.6
Nowadays major topics of apartment housing in Korea might be terms as ‘good design’ and ‘energy performance’. In the aspect of good design, we should design apartments as various types and forms in order to get out of simple mass like matchbox. In the term of energy performance, we should plan apartments as high thermal performance to follow the ‘Low Carbon & Green Growth Policy’ of the Korean Government. But between design and energy concepts, there is antinomy. Concentrating on good design brings about dropping off energy efficiency in apartment. Strengthening thermal performance leads to simple mass cause by constructability of outer wall insulation. In this situation, the aim of this paper is to suggest the best ways of satisfying both good design and energy performance harmoniously in apartment housing by comparing domestic and foreign examples which is considered to be applied both good design and energy performance. In conclusion, I suggest three points : 1)apply new methodology such as IDP on early design stage, 2)use design strategy to ensure thermal performance such as constructability of outer wall insulation, 3)remove all unnecessary ornaments on the wall.
리포다당질에 의한 급성폐손상에서 Ethyl Pyruvate의 효과
이승현 ( Seung Hyeun Lee ),윤대위 ( Dae Wui Yoon ),정진용 ( Jin Yong Jung ),이경주 ( Kyung Joo Lee ),김세중 ( Se Joong Kim ),이은주 ( Eun Joo Lee ),강은해 ( Eun Hae Kang ),정기환 ( Ki Hwan Jung ),이승룡 ( Sung Yong Lee ),이상엽 ( 대한결핵 및 호흡기학회 2006 Tuberculosis and Respiratory Diseases Vol.61 No.4
연구배경: 급성폐손상에서 활성산소종에 의한 산화 손상은 주요한 역할을 한다. Ethyl pyruvate (EP)는 체내에서 생성되는 pyruvate의 유도체로 항산화 및 항염증 효과가 있음이 알려졌다. 저자들은 리포다당질에 의한 급성폐손상 모델에서 EP가 염증반응에 미치는 영향을 연구하고자 하였다. 방법: 5주 령의 BALB/c 생쥐를 이용하여 리포다당질을 기관 내로 투여하여 급성폐손상을 유도하였다. 대조군, LPS군, EP+LPS군, LPS+EP군으로 나누어 기관지폐포세척액에서 TNF-α, IL-6 및 myelo-peroxidase (MPO)의 활성을, 폐조직에서 급성폐손상지수와 NF-κB의 농도를 측정하였다. 결과: EP+LPS군에서 TNF-α및 IL-6의 농도는 LPS군과 비교하여 감소하였고 (p<0.05) 이들 염증성 시토카인의 농도의 변화는 NF-κB의 농도의 변화와 상관 관계를 보였다 (p<0.01). 급성폐손상 지수는 EP+LPS군 및 LPS+EP군에서 LPS군과 비교하여 낮았고 (p<0.05) MPO활성은 EP+LPS군에서 LPS군에 비해 낮았다 (p<0.05). 결론: EP는 LPS로 인한 급성폐손상에 있어서 예방 및 치료 효과가 있는 것으로 판단된다. Background: Ethyl pyruvate (EP) is a derivative of pyruvate that has recently been identified by both various in vitro and in vivo studies to have antioxidant and anti-inflammatory effects. The aim of this study was to determine the effect of EP on lipopolysaccharide (LPS)-induced acute lung injury (ALI). Methods: 5 weeks old, male BALB/c mice were used. ALI was induced by an intratracheal instillation of LPS 0.5㎎/㎏/50μL of saline. The mice were divided into the control, LPS, EP+LPS, and LPS+EP groups. In the control group, balanced salt solution was injected intraperitoneally 30 minutes before or 9 hours after the intratracheal instillation of saline. In the LPS group, a balanced salt solution was also injected intraperitoneally 30 minutes before or 9 hours after instillation the LPS. In the EP+LPS group, 40㎎/㎏ of EP was injected 30 minutes before LPS instillation. In the LPS+EP group, 40㎎/㎏ of EP was injected 9 hours after LPS instillation. The TNF-α and IL-6 concentrations in the bronchoalveolar lavage fluid (BALF), and that of NF-kB in the lung tissue were measured in the control, LPS and EP+LPS groups at 6 hours after instillation of saline or LPS, and the ALI score and myeloperoxidase (MPO) activity were measured in all four groups 24 and 48 hours after LPS instillation, respectively. Results: The TNF-α and IL-6 concentrations were significantly lower in the EP+LPS group than in the LPS group (p<0.05). The changes in the concentration of these inflammatory cytokines were strongly correlated with that of NF-κB (p<0.01). The ALI scores were significantly lower in the EP+LPS and LPS+EP groups compared with the LPS group (p<0.05). In the EP+LPS group, the MPO activity was significantly lower than the LPS group (p=0.019). Conclusion: EP, either administered before or after LPS instillation, has protective effects against the pathogenesis of LPS-induced ALI. EP has potential theurapeutic effects on LPS-induced ALI. (Tuberc Respir Dis 2006; 61: 374-383)
공동주택 계획단계 세대별 조망분석 및 평가에 관한 연구
정주현(Jung Joo-Hyeun),김세용(Kim Sei-Yong) 대한건축학회 2010 대한건축학회논문집 Vol.26 No.10
The purpose of this study is to suggest the method of analysing and evaluating the view from inner side of apartment house on planning stage of layout with BIM technology. In order to do this, the real project of high rise apartment house at Haewoondae on Pusan is applied as example in this thesis. With this study, view evaluation could be analysed at the first stage of design in site planning with BIM technology. The result of view simulation at the pre stage of design will be lead to the proper site design and promote the satisfaction ratio of customer of apartment housing.
이달의 X선 : 양측 미만성 폐침윤과 전신 홍반을 동반한 말초 T세포 림프종
이승현 ( Seung Hyeun Lee ),하은실 ( Eun Sil Ha ),김정하 ( Jung Ha Kim ),정진용 ( Jin Yong Jung ),이경주 ( Kyung Joo Lee ),김세중 ( Se Joong Kim ),이은주 ( Eun Joo Lee ),허규영 ( Gyu Young Hur ),정기환 ( Ki Hwan Jung ),정혜철 ( Hye 대한결핵 및 호흡기학회 2005 Tuberculosis and Respiratory Diseases Vol.59 No.5