http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김재덕(Jea-Duck Kim),성민혁(Min-Hyuk Sung),하지훈(Ji-Hoon Ha),김영석(Yeong-Seuk Kim) 대한전자공학회 2015 대한전자공학회 학술대회 Vol.2015 No.6
In this paper, A low-voltage OTA is designed for biological signal measurement, The designed OTA operates at a supply voltage of 0.5V. The output current range of OTA is - 3 ~ 32nA. Using this low voltage OTA 6<SUP>th</SUP> order low-pass filter is designed. The cut-off frequency of the designed filter is 97Hz. The proposed OTA and 6<SUP>th</SUP> order filter are simulated by Cadence Spectre and fabricated using 0.18㎛ CMOS technology.
김재덕(Jea-Duck Kim),김영석(Yeong-Seuk Kim) 대한전자공학회 2015 대한전자공학회 학술대회 Vol.2015 No.11
In this paper, A low-voltage potentiostat is designed. The proposed potentiostat consists of an amplifier and current mirror. It can measure current occurred by O2 or H2O2. To reduce current measurement error made by channel length modulation, we use cascode current mirror. The simulation results show that output voltage error is maximum 3mV, supply voltage is 1.0V. The proposed low-voltage potentiostat is designed by Cadence and simulated by spectre using a 0.18um CMOS technology.
박재덕(Jea-Duck Park),김수용(Soo-Yong Kim),한민식(Min-Sik Han),전언찬(Eon-Chan Jeon) 한국기계가공학회 2007 한국기계가공학회지 Vol.6 No.3
This study is for aspheric lens that is one of a core technology in the optical industry. The feature of a aspheric lens is not to have the spheric aberration. So in optical industry, aspheric lens are essential element to miniaturization, high effectiveness and light weight. In this study we applied a lay back-tracer method using the index of refraction to design aspheric lens. We developed the automatic design program for aspheric lens by user interfacing program VisualLISP in AutoCAD. And we manufactured aspheric lens and measured it.
우제근 ( Jea-keun Woo ),최일수 ( Il-su Choi ),이춘구 ( Chun-gu Lee ),이명희 ( Myung-hee Lee ),김영화 ( Young-hwa Kim ),유승화 ( Seoung-hwa Yu ),최용 ( Yong Choi ),최덕규 ( Duck-kyu Choi ),김영근 ( Young-keun Kim ),이충근 ( Choung 한국농업기계학회 2022 한국농업기계학회 학술발표논문집 Vol.27 No.2
농가인구의 고령화 및 감소, 1인당 경지면적 증가 등으로 인해 노동력 부족 현상이 조명되고 있다. 따라서 시간당 더 많은 면적을 작업할 수 있도록 농기계의 고성능화가 요구되고 있다. 현재 4~6조 콤바인이 시판 중에 있으며, 앞서 설명된 영농 규모 변화에 따라 대형 콤바인의 수요가 늘어나는 추세이다. 이에 본 연구는 6조식 자탈형 콤바인 고성능화를 위하여 작업속도에 따른 수확성능과 작업능률을 측정 및 분석하였다. 시작기의 벼 수확 포장성능 시험은 경남 창녕군 남지읍 소재 농가포장에서 수행하였으며, 시작기 선별부의 구동조건을 선별체 회전수 422 rpm, 풍구 회전수 800 rpm, 채프각 45°으로 고정하고, 작업속도 3수준(1.5 m/s, 1.7m/s, 1.9 m/s)을 시험요인으로 설정하였다. 수확성능 분석을 위해 작업구간을 10 m로 설정하고 임의로 1 m 구간을 선정하여 시작기 뒤로 배출된 볏집, 검불 등을 조사하여 곡립구중의 손실립비를 측정하였다. 작업능률의 경우 시험 당시 측정된 평균 작업속도, 유효 작업폭, 회행시간을 측정하여 도출하였다. 공시작물의 생육조사 결과 경장 86.83±4.95 cm, 이삭길이 20.40±5.85 cm, 곡물 함수율 15.37±0.43%, 천립중 28.65±1.05 g으로 나타났다. 시험 결과, 최대 작업속도인 1.9 m/s일때, 곡립구중의 손실립비가 0.41%로 농업기계 검정기준(1% 이하)을 충족하는 것으로 나타났다. 또한, 전년도에 동일한 구동 조건으로 수행한 선별부 시뮬레이터 시험 결과인 1.08%보다 낮게 나타났다. 이는 선별부 시뮬레이터 구동 시, 시작기에 부착된 선별부 대비 고정력이 약하여 더 큰 진동이 발생, 손실립비가 시작기에 비해 높게 발생한 것으로 판단된다. 작업능률은 평균 작업속도 1.9 m/s 기준, 유효 작업폭 1.8 m, 회행시간 9.33s로 측정되어 0.11시간/10a로 나타났다.
우제근 ( Jea Keun Woo ),최덕규 ( Duck Kyu Choi ),전현종 ( Hyeon Jong Jun ),김영화 ( Young Hwa Kim ),최일수 ( Il Su Choi ),유승화 ( Seung Hwa Yu ),강연구 ( Youn Koo Kang ),이상희 ( Sang Hee Lee ),현창식 ( Chang Sik Hyun ),최용 ( Y 한국농업기계학회 2020 한국농업기계학회 학술발표논문집 Vol.25 No.2
최근 무인 헬리콥터에 비해 상대적으로 저렴하고 조작이 간단한 멀티콥터를 활용한 재배기술의 연구 및 개발되고 있으며 특히 방제작업의 상용화가 활발히 이루어지고 있다. 농약 보조제는 농약 희석액의 약효를 증진하기 위해 사용이 많이 이루어지고 있으나, 농약 보조제를 포함한 항공방제용 농약에 적합한 상용 노즐 특성 및 선정에 관한 연구는 부족한 실정이다. 따라서 본 시험에서는 상용 노즐의 타입 및 농약 보조제 첨가에 따른 분무 특성을 파악하고자 한다. 본 연구에서는 물과 전착제 및 카바액제를 희석한 용액의 분무입경 측정 및 분무패턴 촬영을 하였으며, (주)팜한농으로부터 농약 보조제를 제공받아 제품에 명시된 희석배수로 물과 혼합하였다. 시험에 사용한 노즐로 부채꼴 확장 타입인 Extended Range Flat Spray Tips(XR110015, TeejetⓇ, USA) 및 프리오리피스를 장착한 Drift Guard Flat Spray Tips(DG110015, TeejetⓇ, USA)을 공시하였다. 시험방법으로는 환경조건이 온도 19℃~20℃, 습도 61%~67%인 실내공간에서 이루어졌으며 멀티콥터 농약 분무용 펌프(BWP-6093A)를 이용하여 분무압력 2bar로 용액을 노즐에 공급 및 분무하였다. 2~2000㎛ 범위의 분무입경 측정이 가능한 입도분석기(Spraytec, Malvern Panalytical, UK)를 통해 노즐과 측정장비의 레이저 회절사이에 수직으로 50cm 이격거리를 두고 분무입경을 측정하였다. 노즐에 분무되는 용액의 유동 가시화를 위해 슐리렌 기법을 사용하였고 노즐로부터 50mm 하류까지 가시화하였다. 시험결과 XR110015 노즐의 경우 물과 전착제를 희석한 용액의 유의미한 입경차이는 나타나지 않았으며 카바액제를 희석한 용액은 물에 비해 약 6.99% 입경 크기가 감소하였다. DG110015 노즐은 전착제를 희석한 용액은 물에 비해 분무입경이 약 3.97% 증가하였으며 카바액제 희석용액의 경우 분무입경이 11.31% 감소하였다. 농약 보조제 희석에 따른 분무입경 특성은 프리오리피스 타입 노즐에서 두드러지게 나타나는 것으로 판단된다. 슐리렌 기법을 통한 분무패턴 촬영 결과 시험에 투입된 노즐의 형식에 상관없이 물과 전착제의 유동 모습의 차이는 크게 나타나지 않았으며, 카바액제의 경우, 표면장력 약화로 액적분열(break-up)이 물보다 더 낮은 위치에서 일어나는 것으로 나타났다.
우제근(Jea Keun Woo),최일수(Il Su Choi),김영근(Young Keun Kim),최용(Yong Choi),최덕규(Duck Kyu Choi),이호섭(Ho Seop Lee),김지태(Ji Tae Kim),박영준(Young Jun Park),김재동(Dong jae Kim) 유공압건설기계학회 2023 드라이브·컨트롤 Vol.20 No.2
Fresh corn, one of the main food crops, must be harvested by hand. A harvest mechanization technology is required. In this study, a tractor-attached harvester was designed and manufactured to sequentially perform stem reaping, fresh corn detaching, and collecting. The(harvester was designed so that the main device could operate through a hydraulic pump and a generator could be operated through the tractors PTO. Factor tests were conducted according to cultivars (Ilmichal, Super sweet corn) and working speed (0.12 m/s, 0.17, 0.22). After the factor test, detached corns ratio, collected corns ratio, and damaged corns ratio were analyzed and harvest performance was evaluated. Harvesting performance was good for super sweet corn. Considering operation efficiency, 0.22 m/s was judged to be an appropriate working speed. It was found that it took two hours to work an area of 10 a.
여분을 갖는 통신시스템에서의 자기검사특성 향상에 관한 연구
신덕호(Shin Duck Ho),김현기(Kim Hyun Ki),이재훈(Lee Jea Hoon),이창훈(Lee Chang Hoon),이기서(Lee Key Seo) 한국철도학회 2000 한국철도학회 학술발표대회논문집 Vol.- No.-
In this paper, the method is used that each system isolates the part in which faults are occurred in case of fault occurrence since total system is designed in the type of hot standby sparing system construction and self-checking circuit in each system is attached to the memory being of the high failure rate in common communication system. Thus reliability and availability in system are improved. In this thesis, self-checking circuit was designed using 2 out of 6 code and didn"t have any effect to the system operation. For the purpose of verification, each system attached with self-checking circuit was simulated through fault injection and the continuity of each system in hot standby sparing system was tested in case that the system was switched when faults in the system were occurred.