http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Development of Weeder Machine to Remove Furrow Weeds by Applying Circle Blade
( Hyunjune Lee ),( Subo Yang ),( Hwanggyu Lee ),( Hongmin Ahn ),( Jinhyun Kim ),( Taewook Kim ) 한국농업기계학회 2018 한국농업기계학회 학술발표논문집 Vol.23 No.1
Removing the weeds from the furrow from the field crop cultivation should be carried out at an appropriate time. Most of the blade currently used in the flat shape and is not suitable for removing weeds from furrow. This research is to develop a weeder machine using a circle blade to efficiently remove weeds in the furrow. The geometric shape of the furrow was designed to develop the weeder machine. Circle blade shapes were based on the depth and width of the furrow from which the field crops were grown. Circle blade shapes were designed to fit the shape and size of the furrow so they would effectively remove weeds in the furrow. Weeder machine driving part is designed to drive a 300mm wheel using a differential gear on the engine’s power extraction device. And the auxiliary wheel was applied to the front of the weeder machine to adjust the height of weeder machine. In the weeding part, a designed by arranging two circle blades in pairs. Depending on the size of the furrow, the angle of placement for the circle blade was designed from 60 to 120 degrees.Power transmission is accomplished by distributing power to both sides using bevel gears. Blade rotation and driving tests were conducted. The optimum circle blades rotation speed of weeder machine drive speed were measured. As a result, it was judgement that the running speed of 4km/h was most suitable at the rotation speed of 3,000~4,000rpm.
Park, Hyunjune,Lee, Jongtaek,Park, Taehee,Lee, Sanghun,Yi, Whikun American Scientific Publishers 2015 Journal of nanoscience and nanotechnology Vol.15 No.2
<P>Cadmium sulfide (CdS) and cadmium selenide (CdSe) are sequentially assembled onto a nanocrystalline TiO2 film to create a quantum-dot (QD)-sensitized solar cell application by a successive ionic layer adsorption and reaction (SILAR) method. The results show that CdS and CdSe QDs have a complementary effect in the performance of light harvest of solar cell. Single-walled carbon nanotubes (SWNTs) are incorporated with a CdS/CdSe QDs solar cell by mixing them with TiC2 film to enhance electron transfer. SWNTs are also sprayed onto CdSe QDs (SWNTs onto CdSe) to apply p+ type properties of SWNTs. Absorbance is increased in a wide wavelength range. In particular, cells having the sprayed SWNTs onto the QDs show a clear increase in absorbance at a low wavelength region. The fill factor of CdS/CdSe QDs solar cell with SWNTs is higher than that without SWNTs, indicating the decrease in loss of electron from TiO2 to QDs. Short-circuit current in a QD-sensitized solar cell having SWNTs on CdSe shows maximum value. Photo-current conversion efficiency of cells is increased in both cell types containing SWNTs at 10~17% compared with pristine cells. We expect that solar cells using SWNTs will affect future energy technology and devices.</P>
생체자기 신호측정을 위한 고인덕턴스 코일 내장형 온칩 자기센서
류현준(HyunJune Lyu),최준림(Jun Rim Choi) 대한전자공학회 2013 전자공학회논문지 Vol.50 No.6
생체자기신호 측정을 위해 고인덕턴스 코일과 계측 증폭기를 내장한 자기센서칩을 0.18㎛ CMOS공정으로 제작하였다. 생체자기신호를 측정하기 적합한 감도와 대역폭을 가지는 고인덕턴스 코일센서를 전자기장 시뮬레이션 프로그램으로 설계하였으며, 온칩에 구현하기 위해 트렌스컨덕턴스 감쇄방법 적용한 low gm OTA를 구현하였다. 자기센서칩의 출력신호 감도는 3.25fT/㎶이며, output reference noise는 21.1fT/√㎐이다. 계측 증폭기부분은 current feedback 기반으로 설계되었으며, 자기신호 잡음을 줄이기 위해서 0.5∼5㎑의 대역의 BPF를 설계하였다. MPW칩 테스트에서 common mode rejection ratio(CMRR)는 117.5㏈로 측정하였으며, input reference noise가 0.87㎶ 이하로 유지되도록 설계하였다. Magnetic sensor chip for measuring bio-magnetism is implemented in 0.18μm CMOS technology. The magnetic sensor chip consists of a small-sized high inductance coil sensor and an instr㎛entation amplifier (IA). High inductance coil sensor with suitable sensitivity and bandwidth for measurement of bio-magnetic signal is designed using electromagnetic field simulation. Low gm operational transconductance amplifier (OTA) using transconductance reduction techniques is designed for on-chip solution. Output signal sensitivity of magnetic sensor chip is 3.25fT/㎶ and reference noise of 21.1fT/√㎐. Proposed IA is designed along with band pass filters(BPF) to reduce magnetic signal noise by using current feedback techniques. Proposed IA achieves a common mode rejection ratio of 117.5㏈ while the input noise referred is kept below 0.87㎶.
컴퓨터과학 및 교육 2 : RDB 기반 SPARQL 처리 방법에 관한 연구
정현준 ( Hyunjune Jung ),정동원 ( Dongwon Jeong ),김장원 ( Jangwon Kim ),백두권 ( Doo Kwon Baik ) 한국컴퓨터교육학회 2011 한국컴퓨터교육학회 학술발표대회논문집 Vol.15 No.2
시맨틱 웹 구현을 위해 온톨로지 구축, 온톨로지 통합 및 웹 자원을 온톨로지로 구축하기 위해 RDF, RDF/S, OWL 등의 웹 온톨로지 언어와 웹 온톨로지에 대한 질의 처리를 위해 SPARQL이 개발되었다. 아울러 지금까지 웹 온톨로지 저장 및 관리를 위한 다양한 저장소에 대한 연구가 진행되어 왔다. 특히 관계형 데이터베이스를 기반으로 한 많은 저장소들이 개발되었다. 그러나 관계형 데이터베이스는 SPARQL 질의 처리가 불가능하다. 따라서 이러한 문제를 해결하기 위한 관계형 데이터베이스 기반의 SPARQL 질의 처리 방법에 관한 연구가 진행되어 왔다. 이 논문에서는 관계형 데이터베이스 기반의 SPARQL 질의 처리 방법을 분석하고 현재의 한계 및 문제점을 정의한다. 지금까지 SPARQL은 기능이 추가되면서 확장되어 왔다. 따라서 기존 관계형 데이터베이스 기반 SPARQL 처리를 위한 연구와 SPARQL과의 관계성도 정의한다. 이 논문의 연구 결과는 보다 나은 관계형 데이터베이스 기반의 SPARQL 질의 처리 시스템 개발을 위한 기초 자료로 활용될 수 있다.
정현준(Hyunjune Jung),김주일(Juil Kim),길아라(Ara Khil),정기원(Kiwon Chong),이우진(Woojin Lee) 한국정보과학회 2008 한국정보과학회 학술발표논문집 Vol.35 No.1
센서 노드 미들웨어는 다양한 센서 응용 소프트웨어와 운영체제 및 네트워크 기능 사이에 존재하며, 유지보수, 설치, 배포, 응용 수행에 필요한 제반 사항을 지원하며, 센서 노드에 탑재되어 센서 네트워크의 프로그램 갱신, 응용 변화에 따른 프로그래밍 조정을 수행한다. 본 논문에서는 센서 노드 미들웨어가 센서노드의 응용 모듈을 동적으로 재구성하기 위한 방법으로 속성 값 단위의 동적 재구성 기법을 제안한다. 제안하는 기법은 센서 노드의 응용 모듈을 변경해야 할 필요가 있을 경우, 응용 모듈과 관련된 속성의 값을 변경시켜 줌으로써 응용 모듈을 재구성하는 방법이다. 논문에서는 제안하는 동적 재구성의 개념과 동적 재구성을 위한 프로세스 및 알고리즘을 설명한다. 제시하는 기법은 각처에 설치되어 동작중인 센서 노드들을 무선 통신을 이용하여 재구성함으로써 직접 센서 노드들을 떼어내거나 동작을 중단시키지 않고도 재구성함으로써 운영의 편의를 도모할 수 있는 효과가 있다. 또한 속성 값을 통한 동적 재구성방법을 통하여 용량이 큰 이미지 파일 전송으로 인한 통신 오버헤드를 줄이고 그로인해 배터리 소모를 줄 일수 있다.