切斷患者에 對한 統計的 考察

金明勳 광주보건대학 1985 論文集 Vol.10 No.-

Statistical observations were carried out on 133 amputated limbs of 122 patients who treated at the Dep. of Orthopedic Surgery, Christian Hospital from January l, 1977 to December 31, 1984. The results obtained in this are summarized as follows: 1. The peak incidence was in the age group from 41 to 50 in 31 cases(25.4%). 2. Sex distribution of total patients surveyed showed that 79.5% in male and 20.5% in female. 3. The amputations of the upper extremity were performed on 38 limbs 28.6% and of the lower extremity on 95 limbs(7l .4%), and among them, the most frequent amputation was below the knee. 4. The main causes of amputation were Buerger's disease with 39 cases(32.0%), trauma with 26 cases(21.3%) and osteomyelitis with 15 cases (12.3%). 5. Both limb amputation was perpormed on 6 patients and they were amputated lower extremity. 6. Reoperation was perpormed on 11 cases.

19세기 박람회의 공간구축에 관한 연구

김형준,전영훈,김광현 대한건축학회 2003 대한건축학회논문집 Vol.19 No.8

This study is to examine the spatial construction found in expositions in the 19^(th) century. The purpose is to understand architecture in the 19^(th) century as the origin of the modern architecture in the 20^(th) century, and to reveal the authenticity of modern spaces through spaces of expositions. Expositions in the 19^(th) century are one of the leading architectural themes in that age, Having a vast influence on entire Europe, they are new modern institutional buildings emerging with new modern technologies and culture. This study analysis expositions through three viewpoints in the modern institutional buildings which were 'time', 'threshold' and 'perception'. As a result, spatial construction in expositions were formed by things, people and space which were related to the three viewpoints. The phenomenon and the process in the spatial construction of exposition are related to the modern architecture, and also relations in the space of exposition are extended to the city and the architecture in the 20^(th) century. Therefore, the modern institutional buildings in the 19^(th) century will be studied as to reveal identity of the modern architecture and its modernity.

홍삼박 Silage 제조시 첨가제로서 분쇄옥수수의 효과

백승훈,배영철,김용국 충남대학교 농업과학연구소 2005 농업과학연구 Vol.32 No.2

The purpose of this study was to investigate the effect of ground corn as an additive to ginseng residue silages. The silages were made with corn (CS), red ginseng (GS), red ginseng residue +0.5% ground corn (GS0.5), w/w bases, red ginseng residue+1.0% ground corn (GS1.0) and red ginseng residue+silage inoculant, lactic acid bacteria (GSL). The raw materials were cut only for corn forage in 2cm length. The ginseng residue without cutting were mixed without or with additives, ground corn and inoculant. and ensiled each into two 2,000ml glass bottles. The bottles with silages were stored at a dark place at room temperature and formented for 60 days. The crude protein contents were higher for all red ginseng silages as 17.7, 18.8, 18.3 and 17.8% for GS, GS0.5, GS1.0 and GSL than that of corn silage as 8.8% (p<0.05). The calcium content were higher in GS, GS0.5, GS1.0 and GSL as 0.99, 1.13, 0.99 and 1.03% than that in CS as 0.31% (p<0.05). The pH of silages fermented for 60 days was similar each other; CS, GS, GS0.5, GS1.0 and GSL as 3.8, 3.7, 3.3, 3.5 and 3.7, respectively. However the pH of GS0.5 was the lower than that of corn silage. The total concentration of volatile fatty acids were higher for CS as 87.3 mM/dl than those of GS, GS0.5, GS1.0 and GSL as 44.7, 37.8, 46.3 and 47.2 nM/dl. However, the percentage of lactic acid concentration of ginseng silages such as GS, GS0.5, GS1.0 and GSL, 60.2, 77.2, 83.4 and 77.3% was higher than that in CS, 53.7% (p<0.05). The in vivo dry matter digestibilities for 72hr fermentation was higher in ginseng silages (GS, GS0.5, GS1.0 and GSL as 76.5, 75.8, 72.9 and 77.3%, respetively) than that in for CS as 52.1% (p<0.05). It can be concluded that silage added with ground corn (GS0.5 and GS1.0) and lactic acid inoculant were high in its quality, and the GS0.5 can be suggested as a practical method for red ginseng residues silage making.

한국인 성인 남자에게 구순열 및 구개열의 유병률에 관한 연구

백형선,김재훈,김동준 대한치과교정학회 2001 대한치과교정학회지 Vol.31 No.1

구순열 및 구개열은 두개 악안면 부위에서 가장 자주 발생되는 선천성 기형으로 적절한 의료진의 확보와 의료 정책의 수립을 위해서 정확한 환자 수를 파악하는 것이 필요하다. 그러나, 기존의 국내 발생률 추정 연구는 표본선정의 문제점과 이 질환이 갖는 높은 유산율과 사산을 및 다양한 형태로 인한 분류의 어려움과 한국 내에서의 특수성 중 하나인 장애아들의 해외 입양으로 인해 정확한 환자 수의 파악이 어려웠다. 따라서, 한국인에서의 체계적인 유병률 연구가 필요하리라 사료되며, 대부분의 구순열 및 구개열 환자에서 필요한 교정 치료의 수혜 정도를 파악할 필요성이 있다고 사료된다. 이에 본 연구에서는 한국 성인 남자에서 구순열 및 구개열 환자에 대한 유병률과 이들에 대한 교정 치료 수혜율을 조사하고자, 1998년도 병무청 징병 검사자 중 1979년도에 출생한 자만을 연구대상으로 하여 서울, 광주, 대구, 부산의 성인 남자 218,322명에 대해 3단계 검사를 실시한 후 다음과 같은 결과를 얻었다. 1. 1979년 생 한국 성인남자에서 구순열 및 구개열 환자의 유병률은 1000명당 0.65명이었다. 2. 전후방적 심도에 따라 1000명당 각각의 유병률은 구순열이 0.26명, 구순구개열이 0.36명, 구개열이 0.03명이었다. 구순열과 구순구개열은 비슷한 정도의 유병률을 보였으나, 구개열은 이에 비해 낮은 유병률을 보였다. 3. 횡적 심도에 따라 1000명당 각각의 유병률은 좌측 파열이 0.35명, 우측 파열이 0.16명, 양측 파열이 0.12명이었다. 좌측 파열은 우측 파열에 비해 매우 뚜렷하게 높은 유병률을 보였으며, 양측 파열은 편측 파열에 비해 낮게 나타났다. 4. 구순열 및 구개열 환자 중 성인남자에서의 한국 내 교정치료 수혜율은 35%였으며, 구순열, 구개열, 구순구개열의 순으로 28%, 29%, 67%였다. 구순열이나 구개열과 같이 단독 발생된 경우보다 파열의 심도가 심한 구순구개열의 경우에서 교정치료 수혜율이 높게 나타났다. Cleft lip and/or palate(CLP) is the most common congenital deformity in the craniofacial region. For a practical public health system for these patients it is necessary to have an understanding on the prevalence of CLP. However, it was difficult to estimate the exact number of CLP patients due to problems in sample selection, higher miscarriage and still birth rate, difficulty in classification, and adoptions to foreign countries. Therefore this study was to estimate the prevalence of CLP and the rate of orthodontic treatment, which is usually necessary in cleft lip and/or palate patients. The samples consisted of 218,322 Korean male adults from Seoul, Kwangju, Taegu and Pusan, all born in 1979. The screening method for recognizing the CLP patients was proceeded in steps and the results are as follows. 1. The prevalence of cleft lip and/or palate in Korean male adults born in 1979 was 0.65 out of the 1000 samples. 2. In the anteroposterior aspect of the 1000 samples, the prevalence of cleft lip, cleft lip and palate, and cleft palate was 0.26, 0.36 and 0.03 respectively. 3. In the transverse aspect of the 1000 samples, the prevalence of left, right and bilateral cleft was 0.35, 0.16, 0.12 respectively. The cleft in the left showed a much higher prevalence than in the right, while bilateral cleft showed a lower prevalence than unilateral cleft. 4. The orthodontic treatment rate of Korean male adults among cleft lip and/or palate patients was 35%, and it was in the order of cleft lip and palate, cleft lip, and cleft palate, being 67%, 29% and 29% respectively. The orthodontic treatment rate in patients with the more severe cleft lip and palate was higher than in patients solely haying cleft lip or cleft palate.

신경독성 물질에 폭로되지 않은 건강한 남자의 신경행동학적 검사 수행능력

이세훈,김형아,이원철,장성실,이경재,박정일,정치경 大韓産業醫學會 1995 대한직업환경의학회지 Vol.7 No.1

Five items among neurobehavioral core test battery of World Health Organization, including Santa Ana dexterity, pursuit aiming, digit symbol, simple reaction time, and Benton visual retention, were administered to the workers occupationally non-exposed to neurotoxic agents by operational guide for the WHO neurobehavioral core test battery. Subjects were volunteers from the industrial workers(117) and clerks(40). Detailed occupational history such as exposed agents including noise or vibration, educational level, residence, smoking and drinking habit were recorded. Most of the neurobehavioral tests were correlated with age and educational level. Smoking was correlated with pursuit aiming and digit symbol. Vibration affected pursuit aiming. Job type(industrial workers vs. clerks) and noise exposure did not affected among tested items. Multiple regression analysis was done for establishing predict equation to estimate normal ranges of the tests for male workers. Age was shown to be main independent variable affected for all tests except wrong dot of pursuit aiming. Educational level was also shown to affected most of the tests except Santa ana dexterity and wrong dot of pursuit aiming. Alcohol consumption affected Santa Ana dexterity, non-preferred hand, and smoking affected only wrong dot of pursuit aiming after multiple regression analysis.

스캔 설계 법칙 검사에 관한 연구

이재훈,김형국,조경연,임동욱,민형복 成均館大學校 科學技術硏究所 1997 論文集 Vol.48 No.2

Since testing of digital circuit is becoming increasingly important, many methodologies have been introduced to enhance design for testability (DFT). DFT was taken into account in the automated test procedure and improved reliability of the design. Both tasks are well suited for scan rule checker. This paper presents a scan rule checker for gate level digital circuits. The scan rule checker deals with basic rule check, basic scan rule check, muxed scan rule check, clocked scan rule check and lssd. Scan design informations were represented in the configuration file and libraries were modeled for the scan rule checker. It is an efficient way for the design for testability methodology.

다양한 절삭이송속도로 가공한 A1 7075-T6 소재의 쇼트피닝 전후 피로수명에 관한 연구

김형태,이재헌,신기훈,노승남,서성원 서울産業大學校 2005 논문집 Vol.54 No.1

Aluminum alloy 7075-T6 is ideally used for highly stressed parts such as aircraft components because of its excellent strength to weight ratio. This paper presents a study on the effect of feedrate changes on the fatigue life of A1 7075-T6 specimens before and after shotpeening. For this purpose, five groups of specimens, each of which consists of eight specimens, were first machined at five different feedrates (0.05, 0.10, 0.15, 0.20 0.25mm/rev). Half of eight specimens in each group were then peened and the others remained un-peened. Finally, the fatigue life of each specimen was measured by using 4-point rotatry bending machine. In this paper, comparison of fatigue life among ten sets of specimens is presented. One observation is that the fatigue life of unpeened specimens are inversely proportional to the feedrates. On the other hand, the fatigue life of peened specimens are similarly improved regardless of feedrates except 0.05. Based on the results, it is concluded that shotpeening may improve the fatigue life of Aluminium alloy regardless of feedrates. Therefore, machining productivity may also be increased by choosing higher feedrates for structural conponents that need to be strain-hardened by shotpeening after machining

석탄을 원료로한 활성탄 제조와 흡착특성에 관한 연구

최동훈,김형호,김종수,김재홍,김장호 동아대학교 환경문제연구소 2001 硏究報告 Vol.24 No.2

The purpose of this study is develop manufacture technology of activated carbon for purification of water, it is investigated suitable manufactures for manufacture of activated carbon for purification of water by use anthracite coal and bituminous coal produced in internal and external through this fact, economic valuation and made method established. it is valuated wether or not suitable high degree purification by know removal characteristic organic matter such as KMnO₄Consumption, DOC, UV-254, and THMFP make use of Pilot-plant (purification of water treatment) for made activated carbon. For mixed anthracite coal and bituminous coal by means of coal tar pitch, completely melt to fixed coal tar pitch apply l50℃ heat at stainless steel box, since then compounding weight rate 1:l of anthracite coal and bituminous coal sieved material, then add coal tar pitch and caking water, mixed suitable compounding rate since then extrude and mix by diameter 5.5m extruder, extruded mold cute and dry length l0mm pellet shape by cutter and then made activated carbon.

승온시 Si₂H가스 주입을 이용한 저온 Si 에피택시에 관한 연구

金亨駿,申東勳,崔圭鎭,金東玄 弘益大學校 科學技術硏究所 1998 科學技術硏究論文集 Vol.9 No.2

In this study, we studied on the low temperature Si epitaxy growth for Si epitaxial growth temperature below 650。C. Usually, the Si epitaxy films by chemical vapor deposition are crystallized to polycrystalline films due to a formation of SiO₂layer at the epitaxial Si/Si substrates interfaces. Formation of SiO₂layer on Si surface can be effectively prevented by flowing the Si₂H?? gas during the heating-up procedure for Si deposition. In this way, Si epitaxial layer onto (100) Si substrates was grown epitaxial layer during the post-deposition heat treatments. The suppression of surface BIO₂can be explained in terms of adsorption of SiH?? adspecies, instead of oxygen from residual gases in the reactors, to Si surfaces after desorption of hydrogen from H-passivated Si surfaces. Employing Si₂H?? flowing and epitaxial growth, high-quality epitaxial Si layer was the low temperature below 650。C without conventional high temperature cleaning procedures. And the crystallinity of epitaxial layer measured as deposition conditions using ultraviolet reflectance. AS this results, we could be aquaired process temperature region for high-quality low temperature Si epitaxial growth.

플립플롭의 초기화 가능성을 고려한 디지털 회로에 대한 고장 검출율의 평가 기법

閔炯福,李宰勳,金信澤 성균관대학교 1998 학술회의지원논문목록집 Vol.1998 No.-

디지탈 회로의 검사 신호에 대한 고장 검출율을 정확하게 계산하기 위해 결함 시뮬레이터를 사용한다. 그러나 결함 시뮬레이터의 실행 시간은 회로를 구성하는 게이트 수의 제곱에 비례하여 오늘날의 대규모 회로에서는 많은 CPU 시간을 소모한다. 따라서 정확도는 떨어지지만 비교적 짧은 시간 안에 회로의 검사성을 평가하기 위한 검사성 분석 알고리즘이 제안되었다. COP는 빠르고 정확하느 순차회로에 적용할 수 없으며 STAFAN은 순차회로에 적용이 가능하지만 정상 회로 시뮬레이션의 사용으로 실행시간이 많이 소모된다. 본 저자들은 정확한 고장 검출율을 단시간에 얻기 위해서 EXTASEC을 제안한 바 있다. EXTASEC은 극히 일부 회로에서 정확도가 떨어지는 현상이 발생하였으며, 이 논문에서는 EXTASEC의 문제가 플립플롭의 초기화와 관련이 있는 것을 밝히고, 개선된 알고리즘 ITEM을 제안한다. ITEM은 후진선의 반복적 계산과 초기화되지 않는 플립플롭에 대한 분석으로 고장 검출율을 정확하고 빠르게 얻을 수가 있었다. Fault simulator has been used 10 compute exact Fault coverages of test vectors lor digital circuit. But it is time consuming because execution time is proportional to square of circuit size. Recently, several algorithms for testability analysis have been published to cope with these problems. COP iS very fast and accurate but cannot be used for sequential circuits, while STAFAN can be used for sequential circuits but nerds vast amount of execution time due to good circuit simulation. We proposed EXTASEC which gave fast and accurate fault coverage. But it shows noticeable errors fora few sequential circuits. In this paper, it 1s shown that the inaccuracy is due to uninitializable flipflops, and we propose ITEM to improve the EXTASEC algorithm. ITEM iS an improved evaluation method of fault coverage by analysis of backward lines and uninitializable flipflops. It is expected to perform efficiently for very large circuits where execution time is critical.