http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
On-Line UPS 기능 내장형 ESS 설계 및 적용
권용효(Yong-Hyo Kwon),김말수(Mal-Soo Kim),오기형(Gi-Hyeong OH),장성국(Sung-Kuk Jang),최종철(Jong-Chul Choi),박기원(Ki-Won Park) 대한전자공학회 2016 대한전자공학회 학술대회 Vol.2016 No.6
본 논문에서는 ESS(Energy Storage System)의 Battery측 DC 전압을 공유하여 기본적인 ESS구성에 On-Line UPS기능을 함께 가지는 Multi-Function ESS를 설계하고, 적용한 기술을 설명 한다. 용량은 PCS 250kW, Battery 190kWh, UPS 125kW용량으로 구성하였으며, UPS는 125kWh 2Set를 이중화하는 구성으로 설계 하였다. On-Line UPS 기능 내장형 ESS 전체 제어는 PMS를 통해 이루어지며, 기본적으로 계통연계(GC), 독립운전(GI), GC와 GI가 센싱을 통해 자동으로 절체되는 Auto Mode 제어 모드를 가지며, TOU Application 운영이 가능하도록 제어기를 구현하였다. 또한 PMS는 Battery SoC를 모니터링하여, 사용자가 ESS와 UPS운영을 필요에 따라 용량을 정의하고 운영할 수 있도록 하였다. 관련기술을 기본/상세 설계 후 제작하여, 기능 및 성능에 대한 시험 검증 후 실제 부하와 연계하여 실증한 사례를 기술 한다.
표정인식을 위한 PCA와 템플릿 정합을 사용한 얼굴 요소 추출
우효정, 이슬기, 김동우, 류성필, 안재형 충북대학교 산업과학기술연구소 2013 산업과학기술연구 논문집 Vol.27 No.2
This paper proposed an extracting algorithm of human facial components for the recognition of facial expressions. First face image is acquired using the Haar-like feature mask from an input image. The face image is divided into two images. One is the upper image including eye and eyebrow. The other is the lower image including mouth and jaw. The extraction of facial components, such as eye and mouth, begins getting eye image and mouth image. Then eigenfaces are produced by the PCA training process with learning images. An eigeneye and an eigenmouth are produced from eigenfaces. Result eye image is obtained by template matching the upper image with the eigeneye, and the mouth image is obtained by template matching the lower image with the eigenmouth. The simulation results show that the proposed method has superior extraction ratio than previous method.
하수관거 I/I 분석 프로그램 개발 및 구리시 관내 하수처리구역에 적용
황병기,김경원,정효준 대한상하수도학회 2002 상하수도학회지 Vol.16 No.4
A program was developed to compute infiltration and inflow analysis, and GUI was designed and added in the computational modules for a better understanding and convenient usage for users, named SM-Sewer. The system consists of four modules such as environmental database module for spatial data and their attribute data, filtering module for irregular data, missing data or outllers, I/l analysis module for continuously measured flow data, management module for I/l analyzed results. The modules were integrated using Visual Basic language under Windows Me environment for PC with a management panel, including menu bars, button bars, and tool bars. Using SM-Sewer, the system developed in this study, we performed I/l analysis for wastewater treatment areas of Guri city. According to the results of the analysis, ratio of infiltrated flow to total flow for station Guri-3 takes up 30% and was the highest among the 6 stations. To determine the rank for rehabilitation of sewer system, infiltration rate was computed by dividing by mean diameter and total length of sewer for infiltration. The analysed results show Guri-1 ranked as the first since the mean diameter and total length was large enough compared to the amount of infiltration. Accordingly, rehabilitation program for sewer should be gradually proceeded reflecting the rank determined based on the result of infiltration rate.
윤곽선 정보와 watershed segmentation을 이용한 영역 추출
이원효,설경호,염동훈,고기영,김두영 동아대학교 정보기술연구소 2003 情報技術硏究所論文誌 Vol.11 No.1
This paper proposed a extracting method of the region for image using segmentation and edge information. First proposed algorithm extract information using canny edge detector and the image was divided by watershed segmentation. And it extract the image with edge information by merging region. Finally we compare the proposed method with levelset method. In the result proposed method not only extract the image with accurate region but also reduce operation time.
시간지연 제어기법을 이용한 유연한 로봇 팔의 위치 제어
김동기,강이석,신효필 忠南大學校 産業技術硏究所 1995 산업기술연구논문집 Vol.10 No.2
A TDC(Time Delay Control) theory is applied to the the position control problems of flexible robot manipulators subjected to unknown dynamics and distrurbances. One link flexible manipulator system with tip mass is represented as a simple spring-mass-damper syseem and AC servo motor is used as the actuator. Based on the system model, the TDC is designed, and the PI-controller is also designed for comparison. The control performance of TDC is evaluated through a series of simulations and experiments. The simulational and wxperimental results show that the TDC is much robust than the PI-controller to the unknown dynamics and disturbances.
대한민국 자동차 번호판에서 블록 이진화 기법을 이용한 문자 인식 기법
장인태, 이슬기, 우효정, 안재형 충북대학교 컴퓨터정보통신연구소 2012 컴퓨터정보통신연구 Vol.20 No.1
In this paper, the image binarization method using standard specifications of the vehicle license plate to recognize characters on the plates is proposed. The global binarization method that had a threshold over entire image pixels cannot acuratelly binarize in case that local average brightness are varied to each plates characters regions. The proposed method uses the characters regions in the standard specifications of the korean vehicle license plates as binarization blocks. For installed cameras on national roads and parking areas, the computer simulation results showed average characters recognition rate about 5% higher than the otzu global binarization method.
하천설계기준의 만곡부 수면형 결정 방법에 대한 적용성 검증
최한규,채홍기,백효선 강원대학교 산업기술연구소 2006 産業技術硏究 Vol.26 No.B
Through the result of calculating the deviation between the value calculated from two-dimensional number formula, one-dimensional number interpretation, and curving part water surface type calculation method, we could confirmed that the deviation is reduced more than 50% when we use curving part water surface type calculation method. Also it was confirmed that there occurs the reduction since the reduction rate of safe room height was 20% in 500 CMS of flood water quantity when we planed the construction of levee by curving part water surface type calculation method. And therefore, we have confirmed that the curving water surface type calculation method can be used as a simple formula in rivers with water quantity less than 500 CMS that flows in and out in less than 90 degree angle.
최적설계 기법을 적용한 1톤 운반차용 P.T.O축 및 트랜스미션 개발에 관한 기초연구
김재열,심재기,최승현,정효희,김훈조,오현중,박경섭 한국공작기계학회 2007 한국공작기계학회 추계학술대회논문집 Vol.2007 No.-
Now, power tillers and cultivators which are spread among fruit tree households have usage, low application, and high accident risk. Therefore, the development of multi-purpose work vehicles is needed as an alternative for these problems. Especially, easy usage and the ability to easily change gears when driving and the development of the P.T.O for various tasks such as pruning, water lifting, pest control, application and, mowing are needed. In this research, we will develop a transmission with design on P.T.Oaxle for agricultural work vehicles including multi-purpose vehicles. We aim to develop a 4-wheel drive transmission of synchronous contact type for practical use in fruit tree households which is required to be a large-sized agricultural vehicle. Therefore, we have per performed as follows that are composed of load capacity from 500kg to 1,000kg, safety securing for passengers, and drive securing under bad conditions of the topography slope and swampy land and the rest. For this purpose, we have developed a prototype vehicle through strength analysis of transmission design. we have selected optimal design conditions (Optimal RPM and torque according to some works) on the power transmission with multi-purpose vehicle for various jobs: spraying, manure spreading, mowing, brush wood chopping. If development of the P.T.O containing variable RPM and torque is successful, the following tasks can be possible. Air pruning, air maintenance, water lift, pest control, application, mowing, spraying, and brush wood chopping are possible with this developed P.T.O. Methods and contents for research are followed. Therefore, we have achieved performance-tests through the prototype of the multi-purpose work vehicle and have improved on troubles by the analysis of results of R&D. Also, we provided solutions to problems in mass production in the future.