Accuracy of cardiac output measurements during off-pump coronary artery bypass grafting: according to the vessel anastomosis sites

Sung Yong Park,Dae Hee Kim,Han Bum Joe,Ji Young Yoo,Jin Soo Kim,Min Kang,Yong Woo Hong 대한마취통증의학회 2012 Korean Journal of Anesthesiology Vol.62 No.5

Background: During beating heart surgery, the accuracy of cardiac output (CO) measurement techniques may be influenced by several factors. This study was conducted to analyze the clinical agreement among stat CO mode (SCO), continuous CO mode (CCO), arterial pressure waveform-based CO estimation (APCO), and transesophageal Doppler ultrasound technique (UCCO) according to the vessel anastomosis sites. Methods: This study was prospectively performed in 25 patients who would be undergoing elective OPCAB. Hemodynamic variables were recorded at the following time points: during left anterior descending (LAD) anastomosis at 1 min and 5 min; during obtuse marginal (OM) anastomosis at 1 min and 5 min: and during right coronary artery (RCA) anastomosis at 1 min and 5 min. The variables measured including the SCO, CCO, APCO, and UCCO. Results: CO measurement techniques showed different correlations according to vessel anastomosis site. However, the percent error observed was higher than the value of 30% postulated by the criteria of Critchley and Critchley during all study periods for all CO measurement techniques. Conclusions: In the beating heart procedure, SCO, CCO and APCO showed different correlations according to the vessel anastomosis sites and did not agree with UCCO. CO values from the various measurement techniques should be interpreted with caution during OPCAB. Background: During beating heart surgery, the accuracy of cardiac output (CO) measurement techniques may be influenced by several factors. This study was conducted to analyze the clinical agreement among stat CO mode (SCO), continuous CO mode (CCO), arterial pressure waveform-based CO estimation (APCO), and transesophageal Doppler ultrasound technique (UCCO) according to the vessel anastomosis sites. Methods: This study was prospectively performed in 25 patients who would be undergoing elective OPCAB. Hemodynamic variables were recorded at the following time points: during left anterior descending (LAD) anastomosis at 1 min and 5 min; during obtuse marginal (OM) anastomosis at 1 min and 5 min: and during right coronary artery (RCA) anastomosis at 1 min and 5 min. The variables measured including the SCO, CCO, APCO, and UCCO. Results: CO measurement techniques showed different correlations according to vessel anastomosis site. However, the percent error observed was higher than the value of 30% postulated by the criteria of Critchley and Critchley during all study periods for all CO measurement techniques. Conclusions: In the beating heart procedure, SCO, CCO and APCO showed different correlations according to the vessel anastomosis sites and did not agree with UCCO. CO values from the various measurement techniques should be interpreted with caution during OPCAB.

가압가열 및 Microwave 처리가 생면의 품질에 미치는 영향

박시우,김꽃봉우리,김민지,강보경,박원민,김보람,박홍민,최정수,최호덕,안동현,Bark, Si-Woo,Kim, Koth-Bong-Woo-Ri,Kim, Min-Ji,Kang, Bo-Kyeong,Pak, Won-Min,Kim, Bo-Ram,Park, Hong-Min,Choi, Jung-Su,Choi, Ho-Duk,Ahn, Dong-Hyun 한국식품영양학회 2013 韓國食品營養學會誌 Vol.26 No.4

중력분을 이용하여 제면한 후 가압가열, microwave 및 가압가열과 microwave 병행 처리한 후, 생면 및 삶은 면의 품질에 미치는 영향에 대하여 알아보았다. 생면의 pH는 microwave 1 min 처리구에서 무처리구와 유의적인 차이를 보이지 않았으며, 수분 함량은 autoclave 50 min 처리구에서 무처리구와 유의적인 차이를 보이지 않았고, 그 외의 처리구에서는 모두 수분 함량이 감소함을 확인하였다. 면의 색도 측정 결과는 명도는 무처리구에 비해 모든 처리구에서 감소하였으며, 적색도는 microwave 1 min 처리구는 감소한 반면, 나머지 처리구는 증가하였다. 황색도는 autoclave 50 min 처리구와 autoclave 50 min/microwave 1 min 병행 처리구에서 증가한 반면, 나머지 물리적 처리구에서는 감소하였다. 삶은 면의 색도에서는 명도, 적색도, 황색도 모두에서 무처리구에 비하여 물리적 처리구에서 증가한 값을 나타내었다. 물성 측정 결과는 경도, 부착성, 응집성, 검성, 복원성에서 무처리구와 비교시 microwave 1 min 처리구는 유의적으로 감소하였으며, 그 외 처리구에서는 유의적으로 증가한 값을 나타내었다. 탄력성과 전단력은 모든 처리구에서 유의적으로 증가하였으며, 인장력은 가압가열 30 min 처리구와 무처리구가 유의적인 차이를 보이지 않았으나, 나머지 물리적 처리구에서는 유의적으로 증가하였다. 관능 평가 결과는 생면의 경우 색 항목에서 물리적 처리구들이 유의적으로 낮은 점수를 받았다. 맛, 질감, 향 항목에서는 무처리구와 물리적 처리구간 유의적 차이를 보이지 않았다. 전체적인 기호도에서는 microwave 1 min 처리구가 가장 높은 점수를 얻었으며, 가압가열(50 min)과 microwave(1 min) 병행 처리구는 무처리구와 비슷한 점수를 얻었다. 따라서 제면 후 가압가열 및 microwave 처리가 생면 및 삶은 면에 있어서 색과 질감 항목을 보완, 개선시킨다면 알러겐성이 저감화된 면을 제품화하는데 적합할 것으로 사료되어진다. This study was conducted to determine the effects of physical treatments for quality of wet noodles. Noodles were being tried with a microwave (for 1 min), an autoclave (for 30 or 50 min), and both autoclave and microwave (for 30/1 min or 50/1 min). The results showed that the pH levels were slightly decreased after treatments of autoclave and autoclave/microwave. The moisture contents were considerably decreased as compared to the control except autoclave (50 min). After all treatments, the lightness was decreased in all samples, but, redness was increased (except microwave) and the yellowness was increased after autoclave (50 min) and autoclave/microwave (50/1 min). Texture was increased as compared to the control except microwave. In the sensory evaluation, the noodles treated with microwave, autoclave (50 min), and autoclave/ microwave (50/1 min) showed a high score in overall preference. From these results, both the autoclave and microwave methods can be applied to the wet noodles without diminishing its quality to a great extent.

운동 직후 고온 침수가 EPOC와 TG/ fatty acid cycling에 미치는 영향

조현철,김종규,강민철,홍완표,박노혁 龍仁大學校 體育科學硏究所 2005 體育科學硏究論叢 Vol.15 No.1

The purpose this study was to estimate effects of EPOC and TG/fatty acid cycling on warm water immersion of immediately after exercise. To elucidate the role of fatty metabolism, a sequence of five experiments was performed. Seven physically active, male subjects volunteered to participate in the presented study. The mean values for age, body mass and hight were 25±1.52 yr, 79.2±9.52kg, 177.2±4.62cm, respectively. After giving consent, participant visited the laboratory on six occasion: 1) 30min of treadmill exercise VO2max 55% and a further 60min recovery, 2) 30min partial body warm water immersion in a 39℃ and a further 60min recovery, 3) 30min whole body warm water immersion in a 39℃ and a further 60min recovery, 4) 30min of treadmill exercise VO2mas 55% and in 30min partial body warm water immersion in a 39℃, 5) 30min of treadmill exercise VO2max 55% and in 30min whole body warm water immersion in a 39℃. When compared by recover period within repeat on the base of changes of subjects average body temperature, not effective interactions among repeat. However, partial and whole body warm water immersion immediately after exercise shows it as the best effective exercise for VO2max 55%, partial and whole body warm water immersion. When compared by recover period within repeat on the base of changes of subjects EPOC, effective interactions among repeat(p<.05). Partial and whole body warm water immersion immediately after exercise shows it as the best effective exercise for VO2mas 55%, partial and whole body warm water immersion. The catecholamines concentration was significantly higher partial and whole body warm water immersion than exercise of VO2max 55%(p<.05). The TG concentration and free fatty acid was significantly higher partial and whole body warm water immersion immediately after exercise than exercise of VO2max 55% than Partial and whole body warm water immersion(p<.05). Based on the facts that we have discussed above, human metabolism is increased by both exercise and conditions of immersion and partial and whole body warm water immersion immediately after exercise than exercise of VO2maw 55% shows it as better effective treatment for increasing TG/Fatty acid cycling activation. Due to extremely heavy stress complained by subjects during whole body immersion, it is thought that more researches on it should be required.

한국 국립공원 산림생태계의 수목 탄소저장량 평가

이상진,박홍철,박관수,김현숙,이창민,김진원,심규원,최승운,Lee, Sang-Jin,Park, Hong-Chul,Park, Gwan-Soo,Kim, Hyoun-Sook,Lee, Chang-Min,Kim, Jin-Won,Sim, Gyu-Won,Choi, Seung-Woon 한국환경복원기술학회 2022 한국환경복원기술학회지 Vol.25 No.3

The purpose of this study is to quantitatively evaluate the amount of carbon storage for trees in forest ecosystem to support the foundation for carbon neutrality implementation in Korea National Park. It targeted 22 national parks designated and managed as national parks in Korea, and conducted research on forest trees in the terrestrial ecosystem among various natural and ecological carbon sink. The survey and analysis method followed the IPCC guidelines and the National Greenhouse Gas Inventory in Korea. The amount of tree carbon storage in the forest ecosystem of Korea National Park was confirmed to be about 218,505 thousand CO₂-ton and the amount of carbon storage per unit area was 570.8 CO₂-ton per hectare. Compared to 299.7 CO₂-ton per hectare, the average carbon storage per unit area of the entire Korean forest, it was found that about twice as much carbon was stored when assuming the same area. In other words, it means that the tree carbon storage function of the national park is about twice as high as that of the average tree carbon storage function of entire Korean forest. It has great implications in Korea National Park not only provides biodiversity promotion and exploration services as a national protected area, but also performs excellent functions as a carbon sink.

Layer-controlled thinning of black phosphorus by an Ar ion beam

Park, Jin Woo,Jang, Sung Kyu,Kang, Dong Ho,Kim, Doo San,Jeon, Min Hwan,Lee, Won Oh,Kim, Ki Seok,Lee, Sung Joo,Park, Jin-Hong,Kim, Kyong Nam,Yeom, Geun Young Royal Society of Chemistry 2017 Journal of Materials Chemistry C Vol.5 No.41

<▼1><P>BP thinning was carried out using a monoenergetic Ar<SUP>+</SUP> ion beam and the BP could be thinned without damaging the surface.</P></▼1><▼2><P>Black phosphorus (BP) is one of the most interesting two-dimensional (2D) layered materials due to its unique properties, including a band gap energy change from 0.3 eV (bulk) to 2.0 eV (monolayer) depending on the number of BP layers, for application in nanoelectronic devices. In general, 2D layered materials including BP have limitations in terms of synthesis due to the process factors such as time, temperature, <I>etc.</I>, and thus, a thinning technique from the bulk material to a 2D material needs to be used while controlling the removed layer thickness. In this study, layer-controlled thinning of BP was performed by using a controlled Ar<SUP>+</SUP> ion beam method and the BP thinning characteristics were investigated. By using the near monoenergetic ion energy in the range of 45–48 eV, BP could be thinned with the thinning rate of ∼0.55 nm min<SUP>−1</SUP> down to bilayer BP without increasing the surface roughness and without changing the chemical binding states. The BP oxide on the pristine BP could also be successfully removed using the same Ar<SUP>+</SUP> ion beam. 2D BP field-effect transistors (FETs) fabricated with the thinned bilayer–10-layer BPs exhibited electrical characteristics similar to those of pristine BP FETs suggesting no electrical damage on the BP layers thinned by the controlled monoenergetic Ar<SUP>+</SUP> ion beam.</P></▼2>

An Investigation of the Stability of Y₂O₃ and Sintering Behavior of Fe-Based ODS Particles Prepared by High Energy Ball Milling

Park, Eun-Kwang,Hong, Sung-Mo,Park, Jin-Ju,Lee, Min-Ku,Rhee, Chang-Kyu,Seol, Kyeong-Won The Korean Powder Metallurgy Institute 2013 한국분말재료학회지 (KPMI) Vol.20 No.4

Fe-based oxide dispersion strengthened (ODS) powders were produced by high energy ball milling, followed by spark plasma sintering (SPS) for consolidation. The mixed powders of 84Fe-14Cr-$2Y_2O_3$ (wt%) were mechanically milled for 10 and 90 mins, and then consolidated at different temperatures ($900{\sim}1100^{\circ}C$). Mechanically-Alloyed (MAed) particles were examined by means of cross-sectional images using scanning electron microscopy (SEM). Both mechanical alloying and sintering behavior was investigated by X-ray diffraction (XRD) and high resolution transmission electron microscopy (HR-TEM). To confirm the thermal behavior of $Y_2O_3$, a replica method was applied after the SPS process. From the SEM observation, MAed powders milled for 10 min showed a lamella structure consisting of rich regions of Fe and Cr, while both regions were fully alloyed after 90 min. The results of sintering behavior clearly indicate that as the SPS temperature increased, micro-sized defects decreased and the density of consolidated ODS alloys increased. TEM images revealed that precipitates smaller than 50 nm consisted of $YCrO_3$.

Soil characteristics of the Abies koreana communities at Korean national parks: focusing on Sobaeksan, Deogyusan, Jirisan National Parks

Chang Min Lee,Sang Jin Lee,Gwan Soo Park,Hyoun Sook Kim,Hong Chul Park 충남대학교 농업과학연구소 2022 Korean Journal of Agricultural Science Vol.49 No.2

서울의 PPNG 발생 빈도(1991-1992)

김재홍,윤기범,박평원,김영진,전경민,김영태,김중환,곽호,구상완,송민석,유옥,지혜구,김동원,문상은,박영립,정승호,성범진,성순제,엄주용,황정열,이기홍,이주협,전태진 대한화학요법학회 1994 대한화학요법학회지 Vol.12 No.1

The prevalence of PPNG among pretreated gonorrhea cases isolated at the STD clinic of Choong-Ku Public Health Center in Seoul has been studied and reported annually since 1981. In 1991, 123 strains of N.gonorrhoeae were isolated, among which 58(47.1%) were PPNG. In 1992, 98 starains of N.gonorrhoeae were isolated, among which 51(52.0%) were PPNG. In all, 109(49.3%) strains were found to be PPNG among 221 strains isolated between 1991-1992. The prevalence of PPNG in Seoul showed increased tendency till 1989, thereafter, it has been stationary or slightly decreasing.

Artificial Shrinkage Improves Survival and Embryonic Quality of Vitrified Bovine Blastocysts Derived from IVF and SCNT

Sung-Hun Min,Joo-Hee Hong,Humdai Park,Deog-Bon Koo 한국동물생명공학회(구 한국동물번식학회) 2011 발생공학 국제심포지엄 및 학술대회 Vol.2011 No.1

Freezing of bovine blastocysts has been proposed as a tool to improve the feasibility of cattle production by using embryo transfer technique. However, the low efficiency of frozen-thawed embryos survival and further development is a crucial problem. Thus, we examined the effect of artificial shrinkage before vitrification of bovine expanded, hatched and SCNT embryos on the survival rate, apoptosis index and further development after thawing. Expanded, hatched and SCNT embryos were vitrified after artificial shrinkage, which was performed by puncturing the blastocoele with a pulled pasteur pipet. Artificial shrinkage of the blastocyst was achieved after pushing a pulled pasteur pipet into the blastocoele cavity until it contracted. The shrunken and not shrunken embryos were exposed to cryoprotectant solution in 7.5% ethylene glycol-7.5% DMSOPBS with 20% FBS for 5 min. They were placed in a small volume of vitrification solution (15% ethylene glycol+15% DMSO+PBS+20% FBS+0.5 M sucrose) and plunged into liquid nitrogen on a cryotop. Then, after thawing, cryoprotectant was diluted in 1.0 M, 0.5 M, 0.25 M, and 0 M sucrose for 1, 3, 5, and 5 min. Under the optimal conditions, overall efficiency of the survival rate of bovine expanded, hatched, SCNT embryos in artificial shrinkage groups was higher compared with non-artificial shrinkage groups (p< 0.05). Especially, the numbers of TUNEL-positive nuclei in artificial shrinkage groups were significantly reduced than those of non-artificial shrinkage groups among frozen-thawed expanded, hatched, and SCNT blastocysts (p< 0.05). Our results showed that survival rates in cryopreserved expanded, hatched, SCNT embryos could be improved by reducing the fluid content. Therefore, we suggest that artificial shrinkage method is a effective pretreatment technique for the cryotop vitrification of expanded, hatched, SCNT bovine blastocysts.

적외선 체열촬영을 이용한 온천요법에 관한 임상적 연구

이정민 ( Jung Min Lee ),뱍인선 ( In Sun Park ),안택원 ( Taek Won Ahn ),홍서영 ( Seo Young Hong ) 한방재활의학과학회 2012 한방재활의학과학회지 Vol.22 No.1

Objectives :The purpose of this study was to investigate the influence of balneotherapy on the changes of DITI(digital infrared thermal imaging). Methods :This study was carried out on 27 patients. They went through balneotherapy with high pressure under water shower(15 min.) and whole body bathing in neutral or hot water between 32 to 40 ℃(15 min.). DITI was measured at before and after the treatment. And then the data was analyzed. Results :1. In cold hypersensitivity of hands group, temperature on PC8 rose and difference between LU4 and PC8 decreased(p<0.05)(Fig. 1, Table Ⅱ). 2. In cold hypersensitivity of feet group, temperature on LR3 rose and difference between ST32 and LR3 decreased(p<0.05)(Fig. 2, Table Ⅱ). 3. In shangrexiahanzheng(上熱下寒證) group, there were no significant changes on CV17, CV6 and difference between CV17 and CV6(Fig. 3, Table Ⅱ). Conclusions :These results demonstrated that balneotherapy has clinical effects on cold hypersensitivity of hands and feet. And further studies are required to apply the balneotherapy in order to cure various diseases in the future.