http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Marcasite iron sulfide as a high-capacity electrode material for sodium storage
Voronina, Natalia,Yashiro, Hitoshi,Myung, Seung-Taek The Royal Society of Chemistry 2018 Journal of materials chemistry. A, Materials for e Vol.6 No.35
<P>Iron sulfides have attracted significant attention as promising electrode materials for sodium-ion batteries (SIBs) owing to their low electronegativity, high theoretical capacity, and cost-effectiveness. However, the large size of sodium ions generally induces severe volume changes and sluggish sodium kinetics in iron sulfide electrodes, which have prevented their practical application in SIBs. Herein, an orthorhombic marcasite FeS2 was successfully synthesized under solvothermal conditions and subsequently modified using electro-conductive carbon. This report is the first to use marcasite FeS2 as an electrode material in Na cells. The FeS2/carbon composite exhibited a high Na-storage capacity with stable capacity retention in Na cells; specifically, a discharge capacity of 385 mA h g<SUP>−1</SUP> (over 85% of the initial capacity) was retained after 200 cycles at 100 mA g<SUP>−1</SUP>. The following related Na-storage mechanism was proposed: FeS2 + 2Na<SUP>+</SUP> + 2e<SUP>−</SUP> → FeS + Na2S on sodiation (reduction), and this reaction occurs reversibly on desodiation (oxidation). The FeS2 cathode in the Na cells delivered a high energy density of approximately 620 W h kg<SUP>−1</SUP> even after 200 cycles, which is comparable to that of commercial cathode materials for lithium-ion batteries.</P>
Lee, Sung-Hyung,Yashiro, Hitoshi,Kure-Chu, Song-Zhu Materials Research Society of Korea 2018 한국재료학회지 Vol.28 No.10
The passivation of AZ91D Mg alloys by plasma anodization requires deliberate choice of process parameters due to the presence of large amounts of structural defects. We study the dependence of pore formation, surface roughness and corrosion resistance on voltage by comparing the direct current (DC) mode and the pulse wave (pulse) mode in which anodization is performed. In the DC plasma anodization mode, the thickness of the electrolytic oxide film of the AZ91D alloy is uneven. In the pulse mode, the thickness is relatively uniform and the formed thin film has a three-layer structure. The pulse mode creates less roughness, uniform thickness and improved corrosion resistance. Thus, the change of power mode from DC to pulse at 150 V decreases the surface roughness (Ra) from $0.9{\mu}m$ to $0.1{\mu}m$ and increases the corrosion resistance in rating number (RN) from 5 to 9.5. Our study shows that an optimal oxide film can be obtained with a pulse voltage of 150 V, which produces an excellent coating on the AZ91D casting alloy.
Improvement of joining strength between aluminum alloy and polymer by two - step anodization
Sung-Hyung Lee,Hitoshi Yashiro,Song-Zhu Kure-Chu 한국표면공학회 2020 한국표면공학회지 Vol.53 No.4
In the manufacturing process of joining of aluminum alloy and polymer, the strength of the metal-polymer joining is greatly influenced by the nanostructure of the oxide film. In this study, we investigated the dependence of joining strength on the thickness, structure, pore formation and surface roughness of the formed film. After the two-step anodization process, the surface oxide layer became thinner and rougher resulting in higher joining strength with the polymer. More specifically, after the two-step anodization, the surface roughness, Ra increased from 2.3 to 3.2 ㎛ with pore of three-dimensional (3D) nanostructure, and the thickness of the oxide film was thinned from 350 to 250 ㎚. Accordingly, the joining strength of the aluminum alloy with polymer increased from 23 to 30 ㎫.
Electrochemical behavior and passivation of current collectors in lithium-ion batteries
Myung, Seung-Taek,Hitoshi, Yashiro,Sun, Yang-Kook Royal Society of Chemistry 2011 Journal of materials chemistry Vol.21 No.27
<P>This paper examines several metals that are commonly employed as current collectors of positive and negative electrodes for rechargeable lithium batteries. Current collectors must be electrochemically stable when in contact with the cell component during the potential operation window of an electrode. Various electrochemical techniques have been used to investigate the corrosion of current collector materials. In practice, continued corrosion of current collectors leads to a gradual increase in the internal resistance of cells, which causes the capacity to fade gradually. Corrosion of the current collector may induce a short-circuit, affecting its safety. Thus, the formation of thick and compact, protective passive film on the metal surface is highly important so as to ensure battery performance and safety. Depending on the salts and additives, different types of protective films are formed. The solubility of these surface layers in the electrolyte is a determining factor in the overall stability of the current collector. In this review, we introduce the electrochemical behavior and protective film formation processes of various metallic current collectors in representative electrolytes.</P> <P>Graphic Abstract</P><P>Formation of thick and compact, protective, passive film on the metal surface is highly important so as to ensure battery performance and safety. Depending on the salts and additives, different types of protective films are formed. The solubility of these surface layers in the electrolyte is a determining factor in the overall stability of the current collectors for Li-ion batteries. <IMG SRC='http://pubs.rsc.org/services/images/RSCpubs.ePlatform.Service.FreeContent.ImageService.svc/ImageService/image/GA?id=c0jm04353b'> </P>
Konarov, Aishuak,Bakenov, Zhumabay,Yashiro, Hitoshi,Sun, Yang-Kook,Myung, Seung-Taek Elsevier Sequoia 2017 Journal of Power Sources Vol. No.
<P><B>Abstract</B></P> <P>A S/DPAN (dehydrogenated polyacrylonitrile) composite shows promising electrode performances as a cathode material for Li-S batteries though its electric conductivity is insufficient for high rate tests. In an attempt to enhance the electric conductivity, the S/DPAN composite is attached on reduced graphene oxide (rGO) sheets via self-assembling modification. As a result, the conductivity improves to ∼10<SUP>−4</SUP> S cm<SUP>−1</SUP>, and the S/DPAN/rGO composite thereby delivers approximately 90% of the theoretical capacity of sulphur at a rate of 0.2C (0.34 A g<SUP>−1</SUP>) over 700 mAh (g-S)<SUP>−1</SUP> even at 2C (3.4 A g<SUP>−1</SUP>). We first report on the CS bond between sulphur and DPAN in a composite that maintains the bond even after an extensive cycling test, as confirmed by time-of-flight secondary-ion mass spectroscopy (ToF-SIMS). These synergistic effects enable facile electron transport such that the S/DPAN/rGO composite electrode is able to maintain superior electrode performances.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Sulphur/polyacrylonitrile/reduced graphene oxide composite cathode is studied. </LI> <LI> The composite is synthesized via self-assembly process. </LI> <LI> Electric conductivity of the composite improves to ∼10<SUP>−4</SUP> S cm<SUP>−1</SUP> from ∼10<SUP>−12</SUP> S cm<SUP>−1</SUP>. </LI> <LI> The composite delivers a high capacity over 700 mAh (g-S)<SUP>−1</SUP> even at 2C (3.4 A g<SUP>−1</SUP>). </LI> <LI> The CS bond in the composite is kept even after extensive cycle test. </LI> </UL> </P> <P><B>Graphical abstract</B></P> <P>[DISPLAY OMISSION]</P>
Cho, Dae-hyun,Yashiro, Hitoshi,Sun, Yang-Kook,Myung, Seung-Taek The Electrochemical Society 2014 Journal of the Electrochemical Society Vol.161 No.1
<P>Polyaniline is coated on Li[Li<SUB>0.2</SUB>Ni<SUB>0.2</SUB>Mn<SUB>0.6</SUB>]O<SUB>2</SUB> synthesized via co-precipitation. X-ray diffraction patterns exhibit that the polyaniline coating does not affect structural change of the Li[Li<SUB>0.2</SUB>Ni<SUB>0.2</SUB>Mn<SUB>0.6</SUB>]O<SUB>2</SUB>, and the resulting transmission electron microscopic images show the presence of coating layers on the surface of Li[Li<SUB>0.2</SUB>Ni<SUB>0.2</SUB>Mn<SUB>0.6</SUB>]O<SUB>2</SUB>. Electrochemical tests using coin type cells confirm that the surface modification by polyaniline is effective in maintaining capacity and retention upon cycling. The conducting coating character also assists improvement in rate capability. The polyaniline layer forms F-doped polyaniline during cycling, as is proved by time-of-flight secondary ion mass spectroscopy. Therefore, the presence of the polyaniline layers plays a role in lowering HF levels via scavenging F<SUP>−</SUP> from HF in the electrolyte, and this F–doped polyaniline layer also assists in protecting the Li[Li<SUB>0.2</SUB>Ni<SUB>0.2</SUB>Mn<SUB>0.6</SUB>]O<SUB>2</SUB> from HF attack upon cycling, resulting in improved electrochemical properties.</P>
Sung-Hyung Lee,Hitoshi Yashiro,Song-Zhu Kure-Chu 한국표면공학회 2023 한국표면공학회지 Vol.56 No.1
Diseases caused by air pollution and abnormal climate are occurring worldwide due to global warming. Accordingly, the international community has established a strategy to respond to climate change, and major countries have shifted their economic policies to eco-friendly industries. In this study, we investigate the current status of the renewable energy industry and that of responses to carbon neutrality and PM2.5 (air pollution) in the three major Northeast Asian countries of Japan, Korea, and China, covering changes in the corporate perceptions of Environment, Social, Governance and RE100. In more detail, the three major Northeast Asian countries, referred to as the climate villains in the international community, explain the importance of successful entry into the electric vehicles (EV) industry for a rapid transition to an eco-friendly industry. Moreover, we study the application of lightweight materials for vehicles to improve mileage in the EV industry and technical problems to be solved in the future.
Lee, Sung-Hyung,Yashiro, Hitoshi,Kure-Chu, Song-Zhu Materials Research Society of Korea 2019 한국재료학회지 Vol.29 No.5
The passivation of AZ91D Mg alloys through plasma anodization depends on several process parameters, such as power mode and electrolyte composition. In this work, we study the dependence of the thickness, composition, pore formation, surface roughness, and corrosion resistance of formed films on the electrolyte temperature at which anodization is performed. The higher the electrolyte temperature, the lower is the surface roughness, the smaller is the oxide thickness, and the better is the corrosion resistance. More specifically, as the electrolyte temperature increases from 10 to $50^{\circ}C$, the surface roughness (Ra) decreases from 0.7 to $0.15{\mu}m$ and the corrosion resistance increases from 3.5 to 9 in terms of rating number in a salt spray test. The temperature increase from 10 to $50^{\circ}C$ also causes an increase in magnesium content in the film from 25 to 63 wt% and a decrease in oxygen from 66 to 21 wt%, indicating dehydration of the film.